Bemko SL8 LED Indicator Light Instruction Manual
- July 24, 2024
- BEMKO
Table of Contents
Bemko SL8 LED Indicator Light
Installation Instructions
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with Your Local Authority or retailer for recycling advice.
Features
- Rated voltage.
- Rated current.
- Power consumption.
- Rated insulation voltage.
- Lifetime.
- Working temperature.
- Protection degree.
- Contamination degree.
- Caution, risk of electric shock.
- For internal use.
- Terminal capacity.
Security
Before mounting, read the instructions and disconnect the power supply. Installation should be performed by a qualified user authorized to mount electrical devices depending on the applicable regulations in a given country, under the mounting diagram. Modifications to the product may cause threat and loss of warranty. Use protection against frost when working below 0° C.
Maintenance
All maintenance work should be carried out after disconnecting the power supply. The product temperature may rise to an elevated value. Before commencing maintenance, make sure that the product temperature is safe to make it. Guarantee unrestricted air supply, do not cover the product. Use dry and delicate materials for cleaning. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness/humidity, water, explosive zones, vibrations, and chemical fumes.
Recommendations
Failure to follow the instructions in the manual may result in a fire, electric shock, burns, or other damage. Bemko sp. O.o. is not responsible for failure to comply with the above recommendations. We also reserve the right to make changes to the manual – the current version is available at www.bemko.eu.
Bemko
-
Bemko Sp. z o.o.
ul. Bocznicowa 13 05-850 Jawczyce
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>