EUROfase 48096 28 Inch Black Wall Mirror Instructions

EUROfase 48096 28 Inch Black Wall Mirror

Product Specifications

• Model: CERI SSA 48096
• Max Wattage: 30W
• Light Source: LED
• Input Voltage: 120V~, 60Hz

Product Usage Instructions

Unpacking and Inspection:
Upon receiving the product, carefully unpack and inspect it for any visible damage. Ensure all components are included as per the user manual.

Installation:
Follow the installation instructions provided in the manual. Make sure to turn off the power source before installing the lighting product.

Powering On:
Connect the lighting product to a compatible power source as specified in the manual. Turn on the power to start using the product.

Adjusting Settings:
If applicable, adjust the settings of the lighting product to suit your preferences. Refer to the user manual for guidance on adjusting brightness or color temperature.

OVERVIEW

• 30W MAX,LED,120V~,60Hz
• (LED driver included)
• (PILOTE DE LED COMPRIS)
• (INCLUYE CONTROLADOR LED),

IMPORTANT SAFETY INSTRUCTIONS

• Attention to installer, must test the light fixture before installation.

• When using an electrical furnishing, basic precautions should always be followed, including the following:

• Read all instructions before using (this furnishing).

• DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.

• WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

•  Unplug from the outlet before putting on or taking off parts.

• Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.

• Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

• Never operate this furnishing if it has a damaged cord or plugs if it is not working properly, if it has been dropped or damaged, or dropped into water.
  Return the furnishing to a service center for examination and repair.

• Keep the cord away from heated surfaces.

• Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.

• Never drop or insert any object into any opening.

• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

• To disconnect, turn all controls to the off position, then remove the plug from the outlet.

• WARNING: Risk of Injury – Keep children away from this furnishing.

• WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.

GROUNDING INSTRUCTIONS:

• For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.

• For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :

• This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same
  configuration as the plug. No adapter should be used with this product.

• For loading always put heavier items at the bottom and not near the top to help prevent the possibility of the furnishing tipping over.

• WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.

• Mount furnishings at the correct height.

• This unit is suitable for installation in a damp, indoor location only.

• This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.

• Save tthis instructionfor future reference.

• Estimated Assembly Time: 20 minutes

Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.

HARDWARE INCLUDED

USING INSTRUCTION

DIMENSION

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.

WIRING

OPERATION INSTRUCTIONS

Option 1

Short touch: ON and OFF
Press and hold: Dimmable

Short touch to turn ON and OFF for the defogger function.
Automatic turn off after 1 hour

Short touch to adjust the colour temperature: 3000K (Warm), 4500K (Neutral), 6400K (Cool).
Press and hold: Stepless CCT.

Option 2

MORTE INFORMATION

• ADDRESS: Customer Service & Tech
• Support: 905-695-2147
• Email: Info@eurofase.com
• 33 West Beaver Creek Rd, Richmond Hill, Ontario Canada L4B 1L8

Frequently Asked Questions

• Q: How do I contact Customer Service or Tech Support?
  • A: You can reach Customer Service & Tech Support at 905-695-2147 or email them at Info@eurofase.com.
• Q: What is the warranty on this product?
  • A: For warranty information, please refer to the warranty section in the user manual or contact Customer Service for assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>