Perlick HP15BM41L Signature Series 15 Inch Built In Beverage Center Instructions
- June 3, 2024
- Perlick
Table of Contents
HP15BM41L Signature Series 15 Inch Built In Beverage Center
Instruction Manual
CLEANERS & TOOLS
| TYPE | RECOMMENDED CLEANING PRODUCT |
|---|---|
| Stainless Steel Cleaners | Norwex’ cleaning paste*, ECOSC stainless steel |
cleaner and polish, Haus Naturals’ stainless steel cleaner, Therapy Clean
stainless steel cleaner and polish
Glass Cleaners| Windex° glass cleaners, Haus Naturals° Streak-Free Glass
Cleaner’
Mild Detergents| Haus Naturals° all purpose cleaner
Heavy Discoloration| Penny-Brite, Copper Britec, Paste Nu-Steel`
Cleaning Tools| E-Cloth° Microfiber Home Cleaning Set for Chemical Free
Cleaning, Scotch Brite° pink or blue sponges
- Green cleaning alternative
CLEANING STAINLESS STEEL
Remove food particles and stains first, by wiping down the stainless surfaces with a damp cloth, then dry the surface. Apply a stainless steel cleaner with a microfiber cloth. Make sure to wipe the surface dry after applying the cleaner. Once the surface is cleaned, apply a stainless steel polish to prevent future food stains and fingerprints.
- Do not soak any stainless steel parts- including the shelving, in water to clean. Instead, allow parts to come to room temperature and clean with a blue or pink Scotch Brite pad to remove stubborn stains.
GLASS DOOR CLEANING
Wipe any food particles or stains from the window first, then clean window with a glass door cleaner and lint-free cloth till dry to avoid streaking. If streaking occurs, make a 50/50 ratio of white vinegar to distilled water and clean with a lint-free cloth.
INTERIOR CLEANING
First, remove all bins and shelves from the interior. Wipe the entire interior
with a mild detergent solution and cloth. If any food particles or stains
persist, use a blue or pink Scotch Brite pad to remove with the same mild
detergent solution. Dry interior with a microfiber cloth.
Clean all the removed shelves and bins with the same mild detergent solution.
DO NOT soak any parts to avoid any rusting or damage. Dry all parts with a
microfiber cloth before reinstalling in the unit.
OUTDOOR AND MARINE GRADE PRODUCTS
Wipe down exterior surfaces daily with a microfiber cloth to remove any
deposits and avoid any rusting.
Use the same cleaning products and steps as the indoor models.
8300 W. Good Hope Rd. Milwaukee, WI 53223
800-558-5592
perlick.com