ASTERA FP7-B22 Luna LED Bulb User Manual

Astera LED Technology GmbH
Schatzbogen 60
81829 Munich
Germany
info@astera-led.com | www.astera-led.com

Users Manual

ORDER CODE:
FP7-E26 / FP7-E27 / FP7-B22
MANUAL VERSION: 1.0
DATE OF ISSUE: 14.05.2024

www.astera-led.com/lunabulb

PRODUCT OVERVIEW

1. B22 Socket
2. E26 / E27 Socket
3. Latch
4. Removable Dome

Classic Look vs. Slim Look

USAGE

1. Switching On/Off

To switch on the LunaBulb, it must be screwed into a socket that is connected to a power supply. It then switches on automatically. As long as it is supplied with power, it is not possible to switch the fixture off.

2. More control options

Bluemode, Static Colors, Preprogrammed Effects

All settings, Complex effects, Talkback+, Updates

Control from DMX consoles via CRMX or W-DMX

3. Connect BTB

To control your lights with the AsteraApp, first connect a Bluetooth Bridge (BTB). It forwards the AsteraApp signal to paired lights. You may use an AsteraBox as BTB or choose a light with built-in BTB, like LunaBulb, AX9, NYX Bulb, PixelBrick, Titan Tube BTB, Helios Tube BTB. You can also connect a PrepInlay/ PrepCase for LunaBulb as a BTB.

Connect AsteraBox as BTB

Please power on the AsteraBox. Connect the AsteraBox directly from the AsteraApp main menu by following the instructions there.

Connect light as BTB

Please note: This ONLY works for Astera lights with built-in Bluetooth. For all other Astera lights, please use an AsteraBox as BTB.

Please power on the light. Hold down the power button for 3 seconds until the light flashes blue. If your are using a LunaBulb as BTB you must use a White Remote (ARC3) to active BlueMode. In the AsteraApp press „Manage Bluetooth Bridges“, then “+” and follow the instructions on screen to connect. The light which is connected as BTB shows a small Bluetooth icon in the display.

1. LunaBulb                 2. White Remote               3. White Remote

ON

3. AsteraApp                                        4. AsteraApp

Connect PrepInlay/PrepCase as BTB

Alternatively, a PrepInlay or PrepCase for LunaBulb can also be used as a BTB. You can find more information on this in the corresponding manual.

4. Pair with lights

Connect the LunaBulbs to power. Use the White Remote (ARC3) and press “Bluemode 1/2” button first and then within 5 seconds “Bluemode 2/2” button to pair the LunaBulb with the AsteraApp. (Alternatively, if the light is in a PrepInlay/PrepCase for LunaBulb, press the Bluemode button on the PrepInlay/PrepCase.) Go to the „Pair with Lights“ dialog in the AsteraApp. Then press OK.

1. LunaBulb             2. White Remote

ON
3. White Remote            4. AsteraApp

5. Linking to a CRMX transmitter

1. LunaBulb                2. White Remote

ON

3. White Remote            4. AsteraApp

5. AsteraApp                          6. AsteraApp

7. AsteraBox

A: WAIT TILL LINK

8. AsteraApp

6. Reset

1. LunaBulb             2. White Remote

ON

3. White Remote                  4. AsteraApp

5. AsteraApp                           6. AsteraApp

7. Assembly

To remove the dome for LunaBulb, press the latch down and turn the dome counterclockwise to remove it. To reattach the dome, simply turn it clockwise until you hear it click into place.

Classic Look                       Slim Look

INTRODUCTION / INTENDED USE

The LunaBulb by ASTERA is a single pixel LED bulb for professional use in the event and film business. The LunaBulb is designed for direct or indirect lighting of people, objects or scenery. The LunaBulb features the Titan LED engine with excellent color rendering. The LunaBulb produces white or colored light and the color temperature can be adjusted in many ways. The LunaBulb can be controlled with the AsteraApp or wireless CRMX. It can also be used with an infrared remote control. Thanks to its built-in Bluetooth it can be used as a BluetoothBridge (BTB). It can be powered by AC from an E26/E27/B22 socket.
The LunaBulb can be used indoors and outdoors and has an IP44 rating.

Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat or dust. Avoid direct sunlight for a longer period of time.
The specified ambient temperature must be maintained. Keep away from direct insulation (particularly in cars) and heaters.
Never use the device during thunderstorms connected to the power mains. Overvoltage could destroy the device. Always disconnect the device during thunderstorms.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
Operate the device only after having become familiarized with its functions.
Device is not dimmable via standard dimmers. Use AsteraApp for dimming.
Please consider that unauthorized modifications on the device are not allowed due to safety reasons! If this device is operated in any way different to the one described in this manual, the product may suffer damages and the warranty might be voided. The disclaimer includes all damages, liability or injury resulting from failure to follow the instructions in this manual. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, crash etc. This device is not for household use and is not suitable for permanent installation.

SAFETY INFORMATION

Before you operate this unit read the manual carefully. Always make sure to include the manual if you pass/ rent/ sell the unit to another user. Please use your own caution when operating.
This product is for professional use only. It is not for household use.

• Do not operate the unit in areas of high temperature conditions or under direct sunlight. It may cause abnormal function or damage the product.

• Make sure the unit is mounted properly and safely according to local safety requirements.

• Do not open the product housing.

• Do not place in fire or heat.

• Do not use the unit if it is damaged.

• Avoid bumping or plunging.

• Do not submerge the unit into any liquid.

• Do not use with standard dimmers.

• Do not look directly into the light. lt can cause harm to your eyes.

• Do not look into the light source with a magnifying glass or any other optical instrument that may concentrate the light output.

• Use only Astera approved accessories to diffuse or modify the light beam.

• Do not open the product housing.

• Do not apply power if the unit is damaged.

• Do not submerge the unit into any liquid.

• Do not replace the LED light source.

• Caution, risk of electric shock.

• The exterior surfaces of the unit can become hot, up to 70°C (158°F) during normal operation.

• Ensure that accidental physical contact with the device is impossible.

• lnstall only in ventilated locations.

• Do not cover the unit.

• Allow all lights to cool before touching.

• Keep 0.3m (12″) from objects to be illuminated.

CLEANING AND MAINTAINING

Caution: Liquids entering the housing of the device can cause a short circuit and damage the electronics. Do not use any cleaning agents or solvents. Only clean using a soft damp cloth.

TROUBLESHOOTING

Connect it to the AC and try again.
The fixture turns on but the LEDs do not emit light.| The fixture could be set to BLACKOUT mode or is operating in DMX mode and doesn’t receive a valid signal. Set to display black color.| It is good practice to do a RESET SETTINGS.
The fixture is not working correctly – it does not display the color or effect chosen.| The fixture may still be operating under a previous setting.| It is good practice to do a RESET SETTINGS between setups.

DISPOSAL

• Don`t throw the unit into the garbage at the end of its lifetime.
• Make sure to dispose of according to your local ordinances and/or regulations, to avoid polluting the environment!
• The packaging is recyclable and can be disposed.

MANUFACTURER DECLARATION

Hereby, Astera LED Technology GmbH declares that the type of radio equipment LunaBulb complies with Directive 2014/53 / EU. The full text of the EU Declaration of Conformity is available at the following Internet address: https://astera-led.com/lunabulb.
Astera LED Technology GmbH declares that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.

SPECIFICATIONS – TECHNICAL DATA

Order Codes| FP7-E26
FP7-E27
FP7-B22
---|---
LED Engine| Titan LED Engine
Colors| RGBMintAmber
Total LED Power| 4.25 W
LED Power Draw| 3.3 W
Luminous Flux 3200K| tba.
Luminous Flux 4000K| tba.
Luminous Flux 5500K| tba.
Light Output 3200 K @ 1m| tba.
Light Output 4000 K @ 1m| tba.
Light Output 5500 K @ 1m| tba.
CRI (Ra)/ TLCI 3200- 6500 K* | ≥96
Beam Angle| tba.
Field Angle| tba.
Strobe| 0 – 25 Hertz
Pixels| 1
DC Input| No
AC Input| FP7-E26: 100-120 VAC,
FP7-E27: 100-240 VAC,
FP7-B22: 100-240 VAC
AC Connector| E27 / E26 / B22
Power Consumption (max.)| 4.25 W
Wired DMX| No
CRMX Receiver | Built-in
BluetoothBridge BTB| Built-in
Wireless Protocols| CRMX, UHF, Bluetooth
Wireless Range| CRMX/UHF up to 100 m / 110 yds
Bluetooth up to 3 m / 3.3 yds
RDM Support| Wireless
Infrared Control| Yes
Housing Material| Metal & Polycarbonate
IP Rating| IP44 – Depending on socket used
Ambient Operating Temperature | 0 – 40 °C / 32 – 104 °F
Weight| 0.081 kg / 0.179 lbs
Dimensions Classic Look (Ø x H)| Ø 55 mm x 99 mm (E26) / Ø 2.17″ x 3.90″ (E26)
Ø 55 mm x 100 mm (E27) / Ø 2.17″ x 3.94″ (E27)
Ø 55 mm x 98.6 mm (B22) / Ø 2.17″ x 3.88″ (B22)
Dimensions Slim Look (Ø x H)| Ø 27 mm / Ø 33 mm x 91.6 mm (E26) / Ø 1.06″ / Ø 1.30″ x 3.61″ (E26)
Ø 27 mm / Ø 33 mm x 92.6 mm (E27) / Ø 1.06″ / Ø 1.30″ x 3.65″ (E27)
Ø 27 mm / Ø 33 mm x 91.2 mm (B22) / Ø 1.06″ / Ø 1.30″ x 3.59″ (B22)

All specifications provided are typical values and may be subject to change without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>