MOMAN Power 210 V Mount Battery User Manual

June 9, 2024
MOMAN

MOMAN-LOGO

MOMAN Power 210 V Mount Battery

Caring For Your MOMAN Product

  • Please keep the product in a dry, clean, dust-free environment.
  • Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
  • Use only a soft and dry cloth for cleaning the product.
  • Malfunction may be caused by dropping, impact of external force.
  • Do not attempt to disassemble the product. Doing so voids warranty. Please have the product checked or repaired by authorized technicians if any malfunctions happened.
  • Failure to follow all the instructions may result in mechanics damage. Warranty does not apply to human errors.

Appearance

MOMAN-Power-210-V-Mount-Battery-01

  1. Switch Button
  2. Power indicator light
  3. USB-C
  4. USB-A
  5. D-tap
  6. V-Mount
  7. BP Interface

Attention

  • It is normal for batteries to get hot during charging and use.
  • Keep the pole of the battery clean to ensure a better use experience.
  • Keep the battery in a cool and dry place for long-term storage. It is recommended to keep the battery level above 50%.
  • After ten days, the battery will enter sleep mode automatically and the output will be turned off. Press the indicator light button to restore the output.

Product feature

  • One both-way Type-c interface, can supply power to mobile device or be charged with Type-c charger.
  • One both-way D-TAP interface, can supply power to other device or be charged with this interface.
  • One USB-A interface, can supply power to other device.
  • Four level LED show the life and percentage of the battery capacity.
  • Built-in multiple control circuit, with temperature, voltage, current all-round protection.

Charging Instruction

  • During the charging process, the LED light shows the percentage of remaining battery (25%,50%,75%,90%).
  • Batteries can be charged in the temperature range of 0~40° C, but we recommend charging in the temperature range of 10~30° C to ensure optimal battery performance.

Discharging Instruction

  • At low temperatures, the internal resistance of the battery increases, and the discharge time is shortened. When the load is heavy, the  battery may be automatically cut off.
  • USB and D-TAP interface overload will cause output shutdown, press the button to restore.
  • Please put on the rubber cover immediately after use to avoid dust.
  • The battery can discharge in-20℃ ~50℃ ;The battery performs best when used in the temperature range of-10 ~40℃ .

Indicator Light
The LED indicator from E to F respectively represents the percentage of electric quantity :

Capacity percentage F → E (    : on           : flash)
≥ 90%
75%~90%
50%~75%
25%~50%
< 25%

Troubleshoot ( : on : flash)

F → E

| The battery runs out or is protected. Wait for a period of time and check the indicator status If the indicator status is recovered, it indicates that the battery is exhausted. Charge the battery as soon as possible.
---|---
F → E
| Overcurrent, overtemperature or overvoltage of charge. Please remove the battery and wait for the battery to recover by itself. Overcharging please put the battery in the shade, after a few minutes of cooling, the battery will automatically recover; Remove the battery and discharge it to reduce the battery voltage.

F → E

| The battery cannot be charged or discharged. Please put the battery in a cool place and wait for the core temperature to decrease ( recommended>30 minutes ). Then hang the battery on the charger and try to charge. If the battery is charged normally , the battery will return to normal.
---|---

Specification

Mount Type V-mount
Nominal Voltage 14.4V
Capacity 210Wh/14.6Ah
Interface Electric

Pole×1

| Output| 200W/16A
Input| 16.8V⎓6A
TYPE-C ×1| Output| 65W(Max),5V/9V/12V/15V/20V(Max)⎓3.25A

Protocol:

  1. BC1.2, IOS and SAMSUNG
  2. QC2.0,3.0
  3. FCP,SCP
  4. PD2.0,3.0

Input| 5V/9V/12V/15V/20V(Max)⎓2.4A
D-TAP ×1| Output| 100W/8A
input| 16.8V⎓6A
USB×1| Output| 10W,5V⎓2A
Total Output| 200W/16A
Charging Temperature| 0~40℃ (suggest 10~30℃ )
Discharging Temperature| -20~50℃ (suggest-10~40℃ )
Other Parameters| Electromagnetic
Compatibility| EN55032,
EN55035
Safety| IEC62368,UN38.3
Fall| 1.2m bare device falls freely
Dimension| 105mm79.6mm73.7mm
Net Weight| 1.023kg

Package List

MOMAN-Power-210-V-Mount-Battery-02

Moman (UK) Limited

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals