westfalia 972911 Akku Tacker WAT 4 Battery Powered Stapler WAT 4 User Manual

: June 9, 2024
: Westfalia

Table of Contents

Product Overview
Assembly instruction
TECHNICAL DATA
SAFETY NOTES
CUSTOMER SERVICES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

westfalia 972911 Akku Tacker WAT 4 Battery Powered Stapler WAT 4 User Manual

Product Overview

On/Off switch
Charge indicator
Trigger
Magazine release
Magazine viewing window
Tacker Head

Dear Customers,
Instruction manuals provide valuable hints for using your new device. Please take the time to read this manual carefully and keep it for future reference.

Assembly instruction

Unbox device
Connect charging cable
Insert staple strip
Operation
Safety

TECHNICAL DATA

Firing speed: 30
Dimensions: 155 x 152 x 50 mm
Weight: 660 g
Staple length: T47 6 – 10 mm
T53 6 – 10 mm
Battery: 1,5 Ah
Rated Voltage: 4 V

SAFETY NOTES

Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.

Please also observe the safety notes in the manuals for battery and charger.

Please read this manual carefully and use the unit only according to this manual.
When using the tool, use safety equipment including safety glasses. If operating the tool causes discomfort in any way, stop immediately andreview your method of use.
Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
Battery chargers are for indoors use only. Ensure that the power supply and charger are protected against moisture at all times.
Use metal and voltage detectors to locate concealed electric, water or gas lines. Avoid touching live components or conductors.
Ensure that the lighting is adequate.
Where possible, use clamps or a vice to hold your work.
Periodically check all nuts, bolts and other fixings and tighten where necessary.
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Always remove the battery before removing a jammed staple or reloading a staple strip.
Do not open, disassemble, crush, heat above 60 °C or incinerate. Do not dispose of in fire or similar.
Keep the battery away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
If used incorrectly, liquid may leak from the battery. Avoid contact with it. In case of accidental contact, rinse with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Always switch off the heat gun after work. Please note that the device is still very hot. There is risk of injuries and fire!
Be careful when using the unit near flammable or easy fusible materials such as plastics orglass. Do not direct the unit for long time at the same place. Never point the running unit to people, animals, plants, flammable objects or liquids.
Do not use the unit in explosive atmosphere.
Be aware that heat may be conducted to combustible materials that are out of sight.
Please note that poisonous gases may be emitted while removing paint. Use suitable inhalation protection and ensure adequate ventilation.
Keep the air slots and the nozzle clean to avoid overheating the unit and to prevent from fire hazard.
Use original accessory only.
Should the unit become damaged do not use it any further and have it repaired by a professional or contact our customer service. Do not disassemble the unit or try repairing it yourself.

Batteries do not belong in the household garbage.
For battery disposal please check with your local council.

declare by our own responsibility that the product

Battery-Powered Stapler WAT 4
Article No. 97 29 11

is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

2014/30/EU

Electromagnetic Compatibility (EMC)

2006/42/EC
Machinery
EN 60745-1:2009+AC+A11, EN 60745-2-16:2010

The technical documentations are on file at the QA department of the Westfalia Werkzeug company.

Hagen, 9 th of May, 2022

QA Representative

CUSTOMER SERVICES

DEUTSCHLAND

Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de

ÖSTERREICH

Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at

SCHWEIZ

Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of
its components consist of valuable materials, which can be recycled. Please do not discharge
it in the rubbish bin, but check with your local council for recycling facilities in your area.