FERSA 1300 Series External Mechanical Pullers Instruction Manual

FERSA 1300 Series External Mechanical Pullers

Specifications

Dimensions of the Two Jaws Puller

Dimensions of the Three Jaws Puller

Product Usage Instructions

Jaws Position

1. Make sure the spindle is clean and greased.
2. Check that the shaft is punched or use a point protector.
3. Ensure jaws are evenly spread out from the spindle.
4. Apply pulling force by turning the spindle without striking it.
5. Avoid using the spindle when positioned excessively out of the body.
6. Always use necessary safety equipment and do not use power tools.

Spindle Point

Fixed Spindle Point (1300 to 1307): Spindles with tempered points must be protected when the shaft is not punched.

Spindle with Retractable Point (1310 and beyond): Big size pullers come with a retractable point, eliminating the need for a point protector. Follow the instructions for using the retractable point:

1. Case 1: If the spindle thrusts against a pointed shaft, the point slides in easily.
2. Case 2: When the spindle pushes against a pointed shaft, the point slides in to ease pulling.

Frequently Asked Questions (FAQ)

Q: Can I use power tools with this puller?
A: No, power tools should not be used with this puller as per the user manual instructions for safety reasons.

Q: How should I position the arms for optimal force?
A: The puller has more force when arms are set in the lowest holes. Ensure arms are positioned carefully to prevent bending and catching of the spindle.

TECNHICAL FEATURES

• Two and three jaws pullers.
• Standard jaws (2 holes), long ones (3 holes) extra-long ones (4 holes).
• For exteriors.
• Forged jaws.

DIMENSIONS OF THE TWO JAWS PULLER

Item number with L long jaws with X Extra long jaws.

DIMENSIONS OF THE THREE JAWS PULLER
The height in the chart is the maximum vertical position.
The opening is the maximum while opening at a 15 degrees angle.

Reference| A| B| C| TON| Weight| Combine

2/3

---|---|---|---|---|---|---
1300T| 60| 65| 37| 0.5| 0.3| No
1300LT| 70| 77| 47| 0,5| 0,3| No
1301T| 85| 105| 70| 1| 0,7| Si
1301LT| 105| 115| 70| 1| 0,7| Si
1304T| 135| 150| 76| 4| 1,8| Si
1304LT| 185| 175| 76| 4| 2,1| Si
1307T| 180| 200| 108| 7| 3,3| Si
1307LT| 225| 240| 108| 7| 3,5| Si
1308T| 180| 250| 160| 7| 3,7| Si
1308LT| 225| 290| 160| 7| 3,9| Si
1310T| 300| 310| 161| 10| 7,5| Si
1310LT| 385| 360| 161| 10| 8,5| Si
1310XT| 460| 410| 161| 10| 10,9| Si
1317T| 370| 425| 280| 17| 16,5| No
1317LT| 480| 480| 280| 17| 18,5| No
1317XT| 600| 540| 280| 17| 20,5| No
1330T| 460| 520| 325| 30| 33,5| No
1330LT| 585| 580| 325| 30| 39| No
1330XT| 710| 720| 325| 30| 45,5| No
1350T| 750| 850| 402| 50| 65| No
1350LT| 900| 980| 402| 50| 75| No
1350XT| 1050| 1080| 402| 50| 85,5| No

USER MANUAL

1. Make sure that the spindle is perfectly clean and greased.
2. Check that the shaft is punched otherwise use a point protector.
3. Make sure that jaws are evenly spread out from the spindle.
4. Apply the pulling force by turning the spindle. Never strike the spindle.
5. Never use the spindle while positionned exeedingly out of the body.
6. Make us of all necessary safety equipments.

DO NOT USE POWER TOOLS

ARM´S POSITION

It is advisable to place the jaws in the lowest possible hole. In this way, the jaws will be less bended when applying great effort. (Figure 1)
As more height is needed the spindle starts to come out more (Figure 2). If the shaft is bigger, the spindle will come out in excess of the body, (Figure 3), in that case when pulling with the wrench we can twist the spindle.
When the height of the spindle is very high, it is better to change the position of the legs. (Figure 4).

This series of puller can mount standard arms (05), long arms (06) or extra- long (16).
The puller has more force when arms are set in the lowest holes.
In this position arm bend less when applying great force (Figure 1).

But if the spindle sticks out too much from the body it might bend when using the wrench (Figure 4). This type of bending might lead to the catching of the spindle.
Chose cautiously the position of the arms.

SPINDLE POINT

Fixed spindle point (1300 to 1307)
The spindles featuring a tempered point must be protected when the shaft is not punched.

Spindle with retractable point (1310 and beyond)

A Big size pullers come with a retractable point making the point protector uncessary.
Following are the instructions how to use the aforesaid point.

Case 1
If the spindle thrusts against a pointed shaft then the point slides in easily.

Case 2
Whenever the spindle pushes against a pointed shart the point slides in to ease the pulling.

EXPLODED VIEW

“T” bodies of big pullers can be acquired equipped with the bronze nut and the cover. The references are: 131722, 133022 and 13522. (See comments from page 10).

1300T
130103| M10 x 1| 124| 14| 12| Fix| 1301 / 1301T / 1301L/1301LT
130403| M14 x 1,50| 177| 20| 16| Fix| 1304 / 1304T / 1304L/1304LT
130703| M18 x 1,50| 235| 24| 19| Fix| 1307 / 1307T /1307L/1307LT
131031| M20 x 1,50| 321| 25| 22| Interchangeable| 1310 / All models
131731| M27 x 2| 377| 30| 27| Interchangeable| 1317 / All models
133031| 1 3/8″ 12h.| 510| 38| 35| Interchangeable| 1330 / All models
135032| 1 3/8″ 12h.| 535| 38| 35| Interchangeable| 1350 / All models**

Bodies

For 1317T, 1317LT and 3117XT pullers acquired after 01/07/2018, bronze nut reference is 131712.

The bodies of the pullers 13017T 1330 1330T 1350 1350 T They feature a bronze nut to enhance the force. These nuts rest against a toric gasket designed to absorbe hammering impacts when pulling out the piece. The whole is encased with 2 screws

3 ars bodies
The bodies 1301T, 1304T , 1307T y 1310T are 2 and 3 arms.

If the body is assembled in the inverted position, the M-5 screws will support all the load and they will break.

Arms

16
130006| 4,5| 6,5| 5| 85| 13| 16| 9| 16
130105| 6,5| 8| 7| 106| 19| 23| 13| 39
130106| 7| 7,5| 8| 127| 19| 23| 13| 39
130405| 7| 21| 7| 166| 51| 40| 15| 62
130406| 8| 21| 7,5| 219| 51| 40| 15| 62
130705| 8,5| 25| 9| 217| 44,5| 53| 19| 100
130706| 8| 25| 10| 264| 44,5| 53| 19| 100
131005| 15| 25| 12,5| 355| 83| 61| 30| 130
131006| 15| 25| 12,5| 436| 83| 61| 30| 130
131016| 15| 25| 12,5| 516| 83| 61| 30| 130
131705| 15,5| 32| 16| 435| 115| 85| 32| 130
131706| 17,5| 31| 15,5| 550| 115| 85| 32| 130
131716| 17,5| 31| 15,5| 665| 115| 85| 32| 130
133005| 23| 42| 22| 557| 125| 95| 60| 215
133006| 24| 41| 22| 698| 125| 95| 60| 215
133016| 24| 41| 22| 823| 125| 95| 60| 215
135205| 27| 50| 30| 850| 150| 120| 120| 250
135206| 27| 50| 30| 1060| 150| 120| 120| 250
135216| 27| 50| 30| 1210| 150| 120| 120| 250

Calle Bari, 37
Parque Empresarial PLAZA
50197 Zaragoza (España)
Tlf.: +34 976 333 850

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>