Midea MD200H90W-T Tumble Dryer User Manual

October 30, 2023
Midea

Midea-LOGO

Midea MD200H90W-T Tumble Dryer

SAFETY INSTRUCTIONS

CAUTION: RISK OF FIRE!

Warning! To prevent any damages to your and others’ life or property, you have to follow the safety notes.

Intended use

  • This heat pump dryer is intended for drying typical amounts of household laundry, which have been washed with water. It has been designed solely for private use and is not suitable for commercial or shared use i.e. by several families in an apartment building).
  • Use this appliance only as described in this user manual.
  • This appliance is for indoor use only.
  • Any other use is deemed improper and may result in damage to property or even personal injury.
  • The manufacturer accepts no liability for damage caused by improper use.
  • The appliance corresponds to protection class land may only be connected to a plug with a protective conductor that has been installed properly. When connecting the appliance to the mains, make sure that the mains voltage is correct. You can find more information about this on the rating plate.
  • The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

Warning! Electric shock hazard

  • Before connecting the tumble dryer, ensure that the connection parameter on the rating plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician.
  • The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
  • Do not pull the power cord forcefully. Please grasp the mains plug instead
  • Do not plug/draw the mains plug with wet hands.
  • Do not bend, clamp or damage the power cord and the power plug.
  • If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Warning: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
  • Do not connect the appliance to the mains electricity supply by an extension lead, multi-socket adapter or similar.
  • The accessibility of the plug must always be ensured, in order to disconnect the tumble dryer from the mains.
  • If the appliance appear high temperature abnormally, please draw the mail plug immediately. Injury danger
  • The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
  • Do not disassemble or install the dryer without any instruction or supervision.
  • Do not stack this dryer on washing machine without stacking kits. (If you want to stack this dryer on a washing machine, please purchase the independent parts. Installation shall be done by the manufacturer, its service agent or similarly qualified persons to avoid any hazards.)
  • Do not lean on the opened door of the dryer.
  • Condensed water is not drinking water. It can cause health problems in both people and animals if consumed. Damage danger
  • Do not put more load than rated in this user manual. See the related chapter in the user manual
  • Do not operate the dryer without the door filter and base filter.
  • Do not dry the clothes before being spun.
  • Do not expose the dryer directly under the sun.
  • Do not install the dryer in humid and drenching environment.
  • While cleaning and maintenance, please do remember to pull out the power plug and do not directly spray the dryer  with water.
  • The appliance should not be overturned during normal use or maintenance.
    • CAUTION: RISK OF FIRE I

Explosion & Fire danger

  • Please do not dry the clothes with any flammable substances such as kerosene or alcohol. Otherwise, there may be explosion.
  • The appliance contains an environmentally friendly but flammable R290 refrigerant. Keep away from open flame and other sources of ignition.
  • The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
  • Do not dry unwashed items in the tumble dryer.
  • Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
  • Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
  • Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
  • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape,the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
  • Remove all objects from pockets such as lighters and matches.
  • If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent. This will reduce, but not eliminate, the hazard.
  • WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
  • Openings must not be obstructed.
  • The lint trap has to be cleaned frequently.
  • Lint must not to be allowed to accumulate around the tumble dryer.

Safety with children

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Children of less than 3 ears should be kept away unless continuously supervised.
  • Always close the door after use. In this way you will avoid the danger of:
    • Children climb onto or into the dryer or hide things in it.
    • Pets or other small animals climb into it.

Correct Disposal of this product:
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Disposal of packaging material

  • The packaging is designed to protect the appliance from damage during transportation. The packaging materials are environmentally friendly and should be recycled. Recycling the packaging can reduce the use of raw materials in the manufacturing process and the amount of waste in landfill sites.
Model Rated capacity

MD200H90W/T

| 9.0kg

INSTALLATION

Product DescriptionMidea-MD200H90W-T-Tumble-Dryer-
FIG-1

Note: the actual model vou ourchased might differ, Please see the product you purchased in kind orevail
Accessories
The following parts are optional for specific models. If your dryer has following parts, please wear gloves to install them as per the instruction below.Midea-MD200H90W-T-Tumble-Dryer-FIG-3

Transport

Move cautiously. Do not grasp any salient parts of machine. The machine door cannot
be used as the handle for transport. If the dryer can’t be transported erectly, the dryer
can be tilted to right less than 30°.
Risk of injury and damage!
Improper handling of the appliance may result in injury.

  • The appliance is very heavy. Never transport or carry the appliance alone; always with the assistance of another person.
  • Remove all obstacles on the transport route and from the installation location, e.g. open doors and clear away objects lying on the floor.
  • Do not use the open door as a handhold.
  • Remove all package material before using the appliance.
  • Before setting up the tumble dryer, check it for any externally visible damage.
  • Do not install or use a damaged tumble dryer.
  • Do not install the tumble dryer in a room where there is a risk of frost occurring.
  • At temperatures around treezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses.

Installation Position

Warning!

  • Children can become entangled in the packaging film or swallow small parts and suffocate. Do not allow children to play with the packaging.
  • The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
  • Do not restrict the floor clearance through deep pile carpets, strips of wood or similar. This might cause heat built-up which would intertere with the operation of the appliance.
    • It is recommended that, for your convenience, the machine is positioned close to your washing machine.
    • Do not stack this dryer on washing machine without stacking kits. (If you want to stack this dryer on a washing machine, please purchase the independent parts. Installation shall be done by the manufacturer, its service agent or similarly qualified Dersons to avoid anv hazards.
    • The tumble dryer must be installed in a clean place, where dirt does not accumulate. Air must be able to circulate freely around the appliance. Do not obstruct the front air inlet or the air intake grilles at the back of the machine.
    • To keep vibration and noise within minimum level when the dryer is in use, it must be placed on a firm and level surface.
    • The feet must never be removed.Midea-MD200H90W-T-Tumble-Dryer-FIG-4

Level Adjusting
Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, adjust the feet by hand or using a tool.

Power Supply Connection

  1. Make sure that the voltage of the power supply is the same as the electric specification.
  2. Do not connect the dryer with the power connection board, a universal plug or socket, do not use multi-plug adapters and extension cables.

OPERATION

Quick Start

Note: Before using, make sure the tumble dryer is installed correctly.
Before DryingMidea-MD200H90W-T-Tumble-Dryer-FIG-6

After Drying
Buzzer beep and “0:00*on display.Midea-MD200H90W-T-Tumble-Dryer-
FIG-7

Before Each Drying
Note:

  • If the socket with a switch is used, please press the switch to turn off the power
  • Before Each Drying

Note

  • Leave it to stand for 2 hours after transporting. Before first use, please use the soft fabric to clean the inside drum..
    • Put some clean rags into the drum.
    • Plug the power, press [On/Off]
    • Select the [Refresh] Programme, and press the [Start/Pause]button.
    • After finishing this program, please follow the “cleaning and care “and return to page 22 to clean the filter door.
    • During drying, the compressor and the water will generate some noise which is entirely normal.
  1. Before drying, thoroughly spin the laundry in washing machine. High spin speed shortens the drying time and saves energy.

  2. For uniform drying result, sort the laundry according to fabric type and select the appropriate drying programme.

  3. Before drying, please close zips, hooks and eyelets, button, tie fabric belts, etc.

  4. Remove all objects from pockets such as lighters and matches.

  5. Sew in or remove underwiring from bras.

  6. Close duvet covers and pillow cases to prevent small items from being rolled up inside them.

  7. Leave jackets open and undo any long zips so that textiles dry evenly.

  8. Do not over dry the clothes, because over dried clothes can easily get creases.

  9. Do not dry the articles containing rubber or similar elastic materials.

  10. Keep the area around the tumble dryer clean. Coal dust or flour may cause an explosion.

  11. The door shall be opened only after the programme of the tumble dryer is finished
    to avoid being scalded by hot steam or over heated drying machine.

  12. Clean the lint filter and empty water container after each use to avoid extension of drying time and increase of energy consumption.

  13. Do not dry clothes after dry-clean process.

The reference weight of dry clothes (weight per item)Midea-MD200H90W-T
-Tumble-Dryer-FIG-8

Note

  • Do not put more load than rated.
  • Do not dry dripping wet laundry. The dryer might get damaged

Only dry laundry is suitable for tumble drying. Regarding the laundry care labels:

  • Suitable for tumble drying
  • Normal drying process: Drying in the tumbler is possible under a normal load and temperature of 80°
  • Mild drying process: Caution is appropriate when tumble drying. Select a mild
  • process with reduced thermal action.
  • Do not tumble dry: Articles unsuitable for drying in the tumbler.

Control PanelMidea-MD200H90W-T-Tumble-Dryer-FIG-10

  1. On/Off
    The product is switched on or off.

  2. Start/Pause
    Press the button to start or pause the drying cycle.

  3. Option
    These buttons are used for setting additional functions.

  4. Display
    The display shows the setting, estimated program time remaining and status messages of your dryer.

  5. Programs
    Different drying cycles can be selected according to the users need and the type of laundry to be dried.

Option

Delay: This function is used for delaying the start of the drying program up to 24 hours. When the delayed program starts, the time starts to countdown on the display, and the delay icon illuminate.

  1. Load your laundry and make sure the machine door is closed.
  2. Press the button, then use the program selector knob to select the desired program.
  3. You can additionally select the [Anti-Crease] or [ Signal l functions according to your need.
  4. Press the [Delay] button.
  5. Repeatedly to press the [Delay] button to select the desired delay time.
  6. After the button is pressed, the Dryer is in the running condition. The drying procedure will be automatically performed when the delay time is over.
  7. If you press the I button again, the delay function will be paused.
  8. If you want to cancel the “Delay” function, please press the button.

Time: When the [ Time Dry] program is selected, the [Time+), [Time-] button can be used to adjust the drying time in 10 min. steps.

intensity
You can adjust the dryness level of the laundry by pressing the Intensity I button. There are four grades.

  1. The intensity function can be activated only before the program starts.
  2. Press the [Intensity I button repeatedly to increase the drying grade.
  3. Except for the [1 Shirt ] [Bed Linen ], [ Time Dry] [Wool], [Cool] [Cotton] [Iron] [Airfresh] I program, all the other programs can be adjusted with the [Intensity] function.

Lamp
The drum light will be on for 1 minute when the button is pressed or 1 minute when the door
Signal
Set the buzzer on or off. In the default condition, the buzzer is on.
When the buzzer is on:

  1. The dryer will affirm the pressed function button by a sound.
  2. If the program knob is rotated during the dryer is running, the buzzer will remind the user that this is an invalid operation.
  3. When the drying program is done, the buzzer will beep.

Anti-Crease
At the end of the drying cycle, the anti-crease time is 30 minutes (default) or 120 minutes (selected). This function prevents the laundry from creases. The laundry can be removed during the anti-crease phase. Except for [Wool] and [Airfresh], all the other programs have this function.

Child Lock

  1. This machine incorporates a special child safety lock, which can prevent children from carelessly pressing buttons or making a faulty operation.
  2. When the dryer is running or pausing, press the [gridlock] at the same time for 3 seconds to activate the child lock.
  3. When the child lock function is set, the display will show Child lock icon and all buttons are deactivated, except the button.
  4. To deactivate the child lock function, the [stock] button shall be pressed at the same time for 3 seconds.

WiFi

Press for 3 seconds the machine will be connected to the internet on your smartphone, you can go to the settings and turn on the wireless connection and select an AP (Access Point). The details of Wi-Fi connect, please check the part of Smart Function. This is the Wi-Fi switch, if vou want to make your appliance connect to the internet. You need turn on this button.

Remote Control
After connecting your device to WiFi, press 3 seconds, indicating that it has entered the remote control state.
The smartphone remote control should meet the following conditions:

  1. The appliance should connect to the internet;

The door of drum should be closed.
Remark:

  • If the door is open in anytime, the remote control function will be failure.
  • The remote control function is turned off at the end of each cycle automatically,
  • if you want to use remote control function again, you need turn on it again.

DisplayMidea-MD200H90W-T-Tumble-Dryer-FIG-16

Programs
Program selector

  1. When the LED display screen brightens up, rotate the program knob to select the desired program
  2. Select the [Delay], [Time+ J, [Time-], [intensity], [Anti-Crease or [Signal] functions for additional options.
  3. Press the [ DII]I button.
  4. Press the I button after the program has competed.

Program start
The drum will rotate after the program starts. The cycle phase LED in the display will light up and the remaining program time will be displayed. Program end

  1. The drum will stop rotating after the program ends. The display will show “End” and LED will illuminate. The dryer will start the [Anti-Crease] function if a user doesn’t remove the load. Please press I button after unloading the tumble dryer to cut off power and pull out the plug.
  2. Deal with the problems according to the “Trouble Shooting” section, if there is an unexpected stop during the drying procedure or the dryer shows an Error Code

Drying Programmes Table

Programme| Max

Load

| Application/Properties| Delay Time
---|---|---|---



Cotton

| Extra| ****


9.0kg

| For single or multi-layer cotton laundry to be dried completely.for direct storage.| ****

y

| ****


N

Standard

a

Iron| For single layer cotton laundry to remain

damp for ironing.

Mix| Mi x| 3.5kg| For mixed fabrics from cotton and synthetics.| y| N



Synthetic

| Extra| ****


4.5kg

| For thick or multi-layer synthetic fabrics to be

dried completely.

| ****

y

| ****


N


Standard

| To dry thin synthetic textiles, which are not

ironed, such as easy care shirts, baby cloths or socks.

Wool| Wool| 1.0kg| For machine loose wool items, not for drying.| y| N








Special

| ****

1 Shirt

| ****

0.2kg

| Place clothes loosely in the dryer. Once dried, remove quickly and hang it on a clothes hanger.Easy care laundry(small amount of thin synthetics), such as shirts and blouses equipped with anti-crease functionality to minimize the ironing effort.| y| ****

N


5 Shirts

| ****

1.0kg

| y| ****

N

Jeans| 4.5kg| To dry jeans or leisure clothes that are spun at

high speed in the washing machine.

| y| N
Bed Linen| 4.5kg| To dry bed linen, bed sheets or other large items| y| N
Baby care| 1.0kg| To dry small amount of baby clothing| y| N


Outdoor

| ****

3.0kg

| To dry outdoor clothing.waterproof and breathable laundry items which are suitable

for drying in tumble dryer

| y| ****

N

 | ****


Time Dry

|  | To dry individual items or complete the drying

process of multi-layer fabrics with different drying behavior, such as jackets, pillows or voluminous items. Min 1O min. to max.

180min.(in 1O min. steps)

| ****


y

| ****


y

Note for Test Institutes:
“Cotton Extra” Test programme in accordance with Regulation AS/NZS 2442.2 for energy labelling, measured in accordance with AS/NZS 2442.1 and suitable for drying normal cotton load at rated load capacity.

MAINTENANCE

  • Cleaning and Care

Empty the water container

  1. Pull out and hold the water container with two hands.
  2. Tilt the water container, pour out the condensate water into the basin.
  3.  Install the water container.

Warning

  • Empty the water container after each use. Once the water container is filled completely, the program will be paused and the icon will light. After the container is emptied, the dryer can be restarted by pressing [Start/Pause]button.
  • Do not drink the condensate water.
  • Do not use the dryer without the water container.

Clean the filters
This dryer has a primary door lint filter for additional protection. Make sure you clean the door filter after each cycle.

Clean the door filter

  1. Open the door.
  2. Take out the door filter.
  3. Open the filter and remove the fluff on the filter, You can clean it in running water.
  4. Dry the door filter thoroughly before installing it back.

Note: Take notice of the correct orientation before to insert the door filter.

Note

  • The fluff accumulated on the filter will block the air circulation. Not cleaning the filter regularly will increase drying time and energy consumption.
  • Disconnect the power cord before cleaning!
  • Do not operate the dryer without the filter!

Clean the heat exchanger
Warning: Do not touch the heat exchanger with your hand, which may cause an injury.

  • As necessary, approx. once every 3 months, remove the fluff from the heat exchanger using a vacuum cleaner with a dusting brush attached.
  • Clean the heat exchanger without applying any pressure. Otherwise the heat exchanger could be damaged. The drver will not dry if the cooling fins are damaged or bent.

Clean Tumble dryer
Warning

  • Disconnect the power cord before cleaning!
  • Clean the dryer with a wet cloth which is only damped by clean water.
  • Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners. These could damage plastic surfaces and other parts.
  • Please wear gloves when cleaning.
  • Prepare a wet cloth damped by clean water.
  • Clean the door, especially the inside window.
  • Clean the sealing around the door opening.
  • Clean the humidity sensor inside the drum.
  • Take out all the filters, clean the sealing and air flow openings.
  • Before starting the dryer, dry all parts with a soft cloth.

Trouble Shooting

Many malfunctions and faults that might occur in daily operation can be easily remedied. Time and money will be saved because a service call won’t be needed. The following guide may help vou to find the reason for a malfunction and correct it.

Display Reason Solutions
“E32” Humidity sensor error

Please contact your local service center if the problem occurs.

“E33”| Temperature sensor error
“E82”| PCB communication error
| Water pump failure or water

level sensor failure

Container is full| Empty container

Warning

  • Only authorised technicians can carry out repairs.
  • If the LED displays other prompt and the dryer does not work, please call the service.

Note: Before you call the service, please check if you have dealt with the problems yourself consulting the user instructions.

MAINTENANCE

Problem Solution

•Display is not on

| •   Check if the power supply works.

•   Check if the mains plug is inserted.

•   Check the selected programme.

•   Press the button.

• b0″is lighting

| •  Check the water container. If it’s full, please pour out the condensate water and restart the dryer.

•  If the container is not full, please restart the dryer directly.

•  If the “Full” icon is still lighting after you have finished the first two steps, please call the service.

• “ “is lighting| •   Clean the lint filter.

•Dryer does not start

| •  Connect the tumble dryer to the mains.

•  Turn on the tumble dryer.

•  Check the the door is closed.

•  Check the programme is set.

•  Press the button.

•Degree of dryness was not reached or drying time too long

| •  Clean lint filter and heat exchanger.

•  Empty the water container.

•  Check the drain hose.

•  Check installation place is appropriate.

•  Keep the air inlet clean.

•  Use higher drying intensity level programme or time programme.

•There are humming noises

| •   The compressor is operating. These noises are quite normal and do not indicate a fault.
•The dryer switches off at the end of the programme| •  The dryer switches off automatically for energy saving. This is not an error but a normal function.

Warning
If you cannot deal with the problems by yourself and need help

  • Press the [On/Off) button.
  • Pull out the mains plug and call the service.

Technical Specifications

Model

Parameter

| ****

MD200H90W/T

---|---
Dimension(L WH)| 640595845(mm)
Ambient temperature| +5°C – +35°C
Rated input power| 800W
Rated voltage| 220-240V~
Rated frequency| 50Hz
Refrigerant| R290
Weight of product| 49kg
Rated capacity| 9.0kg
GWP| 3
CO, – eq| 0.00t
Quantity of refrigerant| 150g

Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed

Note

  • The rated capacity is the maximum capacity to be dried at one time. Make sure that the dry clothes which are loaded into the appliance do not exceed the rated capacity.
  • Do not install the tumble dryer in a room when there is a risk of frost occurring. At temperatures around freezing point, the tumble dryer may not be able to operate properly.
  • There is a risk of damage if the condensate water is allowed to freeze in the pump, hoses, and / or condensate water container.

Read This Manual
Read all instructions and explanations for the installation before use. Follow the instructions carefully. Keep the operating instructions handy for later use. If the appliance is sold or passed on, ensure that the new owner always receives this operation instruction. www.midea.com.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Midea User Manuals

Related Manuals