EUROfase 48088 30 inch Silver Wall Mirror Instruction Manual

: July 23, 2024
: EUROfase

Table of Contents

EUROfase 48088 30 inch Silver Wall Mirror
Product Information
Product Usage Instructions
FAQ
IMPORTANT SAFETY INSTRUCTIONS
HARDWARE INCLUDED
Dimension
Installation Instructions
OPERATION INSTRUCTIONS
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROfase 48088 30 inch Silver Wall Mirror

Product Information

Specifications

Model: ANYA 48088
Max Wattage: 27W
Light Source: LED
Voltage: 120V~
Frequency: 60Hz

Product Usage Instructions

Unpack the lighting product carefully and ensure all components are included.
Identify a suitable location for installation, ensuring it is compatible with the electrical specifications.
Turn off the power source before proceeding with installation.
Mount or place the lighting product according to the guidelines provided, making sure it is secure.
Connect the product to the power supply as per the wiring diagram provided in the manual.
Switch on the power to test the lighting product. Adjust the positioning if necessary for optimal illumination.
Refer to the maintenance section in the manual for cleaning and upkeep instructions.

FAQ

Q: What should I do if the light does not turn on after installation?
A: Check the power source, ensure all connections are secure, and verify that the bulb is properly inserted. If issues persist, contact customer service for assistance.
Q: Can this product be used outdoors?
A: This product is designed for indoor use only. Using it outdoors may result in damage and void the warranty.
Q: How do I clean the lighting fixture?
A: Switch off the power, let the mixture cool down, then gently wipe it with a soft cloth. Avoid using harsh chemicals or abrasive materials.

Thank You
You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.

27W MAX,LED,120V~,60Hz
(LED driver included)
(PILOTE DE LED COMPRIS)
‘(INCLUYE CONTROLADOR LED)

EUROfase-48088-30-inch-Silver-Wall-Mirror-FIG-1

IMPORTANT SAFETY INSTRUCTIONS

Attention to installer, must test the light fixture before installation.
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER – To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
Unplug from the outlet before putting on or taking off parts.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
Never operate this furnishing if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water.
Return the furnishing to a service center for examination and repair.
Keep the cord away from heated surfaces.
Never operate the finishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
To disconnect, turn all controls to the off position, then remove the plug from outlet.
WARNING: Risk of Injury – Keep children away from this furnishing.
WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
GROUNDING INSTRUCTIONS:
For a permanently connected product: This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the product.
For a grounded, cord-connected product rated max 15 amperes and intended for use on a nominal 120-volt supply circuit :
This product is for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
For loading always put heavier items at the bottom and not near the top to help prevent the possibility of the furnishing tipping over.
WARNING: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer monitors.
Mount furnishings at the correct height.
This unit is suitable for installation in a damp, indoor location only.
This unit is to be mounted to a metal electrical junction box (outlet box) directly supported by the building structure.
Save this instruction for future reference.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder.

HARDWARE INCLUDED

EUROfase-48088-30-inch-Silver-Wall-Mirror-FIG-2

Dimension

EUROfase-48088-30-inch-Silver-Wall-Mirror-FIG-4

Installation Instructions

Temporarily secure the paper (G) to the wall, then mark the anchor (D) locations on the wall through the holes. Remove the paper (G) and drill holes making them slightly smaller than the anchors (D) provided.

EUROfase-48088-30-inch-Silver-Wall-Mirror-FIG-3