Netac ACE01 Wireless Earbuds Instructions
- July 6, 2024
- Netac
Table of Contents
Netac ACE01 Wireless Earbuds
Specifications
- Model: ACE01
- Size: 90mm x 533mm
- Weight: 128g
Product Information
The Netac ACE01 Wireless Earbuds provide a convenient and high-quality audio experience. With features such as Bluetooth connectivity, touch controls, and a charging case, these earbuds offer a seamless listening experience.
Product Usage Instructions
Power On/Off
To power on the earbuds:
- Manual Startup: Touch & hold both left and right earbud for 3 seconds.
- Auto Startup: Open the case, then earbuds will power on automatically.
Bluetooth Connectivity
To connect to Bluetooth:
- Open the charging case, earbuds will go into pairing mode automatically.
- Open Bluetooth from your phone, search for Netac ACE01, then click the connect icon.
Music & Call Control:
For music control:
- Single touch, double touch, or triple touch on either earbud for various functions.
- Transparency mode: Touch for 2 seconds to turn on or off.
For call control
- Single touch, double touch, or touch for 2 seconds on either earbud for different call functions.
Charging
To charge the earbuds:
- When the earbud battery is low with a warning tone, put it into the charging case to charge it.
- Red LED blinking indicates low battery, green LED blinking indicates charging, and LED off indicates fully charged.
Reset Earbuds:
If the earbuds are not connected, before connecting to any device, quick
touch left & right earbuds 5 times to reset them.
FAQ
Q: What should I do if the earbud battery is low?
A: When you hear a warning tone for low battery, place the earbuds in the
charging case to charge them promptly.
- 400-105-5505
- www.netac.com.cn
- Beijing Netac Innovation Technology Development Co.,Ltd.
- Location:138-1-3 No.20,Yongan Road,Mentougou District,Beijing,China Netac Technology Co.,Ltd.
- Location:Netac Building,Number 6 High-tech South St,Nanshan District, Shenzhen,P.R.China 518057
- Web: www.netac.com
Power ON/OFF
- Touch & hold both left and right earbud for 3S to Powe on
- Open the case , then Earbuds will power on automatically
Manual startup
Touch & hold either left or right earbud for 5S to Powe off (When Left and right earbuds are connect, Long press L/R earbud to turn off both of the ear buds)- Put earbuds into charging case and close the case , it will power off automatically
Manual shutdown Auto shutdown
Bluetooth connectivity
Open the charging case , earbuds will goes into pairing Mode automatically
.
Open bluetooth from your phone , search“Netac ACE01”, then click The connect icon
Music Control
Call control
Reset earbuds
When the earbuds are not connected.
Before connect to any Device ,quick touch left & Right earbuds 5 times
Charging
When the earbud battery is low with warning tone. Please put it into the charge case to charge it in time.
Specifications
- Model:ACE01
- Earbud Battery:40mAh
- Charging Case:400mAh
- Play Time:6H(Earbuds) +24H(Charging Case）
- Charging Time:1.5H
- Product Weight:45±5g
- Speaker Unit:φ10mm
- Input:DC5V 450mA
matters needing attention
- Please store and use this product in normal temperature environment;
- Do not expose this product to rain or humid environment for a long time;
- Do not throw it to avoid product damage caused by falling;
- Do not disassemble, repair or transform this product by yourself;
- Please use the power charger with rated voltage to charge;
- Unauthorized disassembly will invalidate the warranty.
- The batteries in the charging stand and earphone are non replaceable batteries Do not expose to such conditions as sunlight, fire or similar overheating
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>