TRANSFORMERS TF-T01PRO True Wireless BT Earphones Instruction Manual

TRANSFORMERS TF-T01PRO True Wireless BT Earphones

Product Usage Instructions

• Ensure the device is placed in a suitable location with a minimum distance of 0cm between the radiator and your body as per FCC regulations.

Power On

• Connect the device to a power source as instructed in the manual.
• Press the power button to turn on the device.

Operation

• Follow the user manual for specific instructions on operating the device.
• Ensure that the device does not cause harmful interference to other electronics.

Maintenance

• Regularly clean the device as per the maintenance guidelines provided.
• Do not attempt any modifications without manufacturer approval.

FAQ

• Q: Can I modify the device on my own?
• A: No, any changes or modifications not approved by the manufacturer may void your warranty and authority to operate the equipment.
• Q: What should I do if I experience interference with the device?
• A: Ensure that there are no external sources causing interference. If the issue persists, contact customer support for assistance.

Packing list

Product Diagram

1. Charging compartment indicator
2. Type-C charging port
3. MFB key
4. Headphone indicator
5. Headphone charging contact
6. Headphone out port
7. Reset key

Tips

1. Do not attempt to disassemble or replace any parts inside the product, except for the operation methods specified in the manual.
2. Do not put the product into water or any other liquid, as this product is not designed to be waterproof.
3. If any liquid accidentally enters the product, please immediately disconnect and remove the product.
4. To avoid electric shock, please ensure that your hands are not wet when installing or uninstalling the product.
5. Please do not place this product near a heat source or directly expose it to a fire source.
6. Do not place this product in an environment with a strong electromagnetic force, otherwise, it may cause product malfunction.

Product specifications

• Bluetooth version: 5.4
• Transmission distance: ≥10M
• Speaker diameter: φ10mm
• Speaker impedance: 32Ω
• Sensitivity: 108±3dB @1kHz
• Frequency range: 20-20kHz
• Charging time: about 1.5 hours
• Music time: about 5 hours
• Battery capacity: 30mAh/3.7V
• Rated input: 5V 30mA

Charging compartment specifications

• Battery capacity: 300mAh/3.7V
• Charging time: About 1.5 hours
• Rated input: 5V 300mA
  (All technical information is subject to actual performance)

• Rated input: 5V 30mA (Earphone)
• Rated input: 5V 300mA (Charging compartment)

Charge the charging compartment and connect it to a 5V power adapter using a Type-C charging cable.
Reminder: When the battery level of the earphones is below 3.3V, a low battery reminder will be played (once every minute), and the earphone blue light will flash quickly.

LED indicator lights and warning sounds

Charging bin status

Factory data reset

1. When the headset is in the charging bay, press the reset button five times to clear all connection records.
2. Long press the reset button in the charging compartment for 8 seconds to clear the connection record with the mobile phone.

Product operating instructions

1. Power on
   Method 1: Remove the headset from the charging compartment to switch on automatically.
   Method 2: Long press the left/right headphone function button for 3 seconds to switch on the phone.

2. Power off
   Method 1: Put the earphones into the charging compartment and automatically shut them off;
   Method 2: If the headphones are not connected to the device after 3 minutes, they will automatically shut down.

3. Pairing
   Step 1: Pair left and right earphones: Remove the earphones from the charging compartment and automatically pair them left and right.
   Step 2: After the left and right earphones are automatically paired successfully, they enter pairing mode and wait for the earphones to connect to the device.
   Step 3: Turn on the Bluetooth function of the device, select “TF-TO1 Pro” to connect, and if the device is not connected within 3 minutes, it will automatically shut down.

Conventional mode

Music Mode

Talk mode

Game/Music /ANC noise reduction/transparent/normal mode

Name and content of harmful substances in the product

This table is prepared according to the provisions of SJ/T11364

• O: Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirements specified in GB/ T26572.
• X: Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specified in GB26572.

Parts marked with “X” in the table cannot be substituted for hazardous substances due to the limitations of global technological development.

• This form is prepared under the provisions of SJ/T11364 Printed Circuit Board Components*: Includes printed circuit boards and their parts, electronic components, and so on;
• Depending on the product model, the product you purchase may not contain all of the above components.
• Does not contain 6 kinds of toxic and harmful substances or contains but is less than the limit value, the letter “e” stands for the English letter electronic; The initials of electrical and environment; The curved arrows around it indicate recyclability.

Warranty Statement

DISCLAIMER
No warranty, representation of position, or other implication of any kind is made in this manual.
The products, specifications, and information mentioned in this manual are for reference only and are subject to change without notice.
Warranty Statement
The products attached hereto are warranted as follows: If the product is damaged due to defects in quality under normal use within twelve (12) months from the date of purchase, the product will be repaired free of charge if it can be repaired, or replaced free of charge if it cannot be repaired as confirmed by the manufacturer, and the product will continue to be covered by the warranty for the remainder of the warranty period (a minimum of not less than 30 days) after the product is repaired or replaced. After repair or replacement, the product will continue to enjoy the warranty during the remaining warranty period (at least 30 days).
The date of purchase is based on the date of the sales invoice. If the date of purchase cannot be determined, the warranty period will be calculated based on thirteen (13) months from the date of manufacture of the product.
For warranty claims, please call the product service hotline first and follow our instructions. To claim the warranty, you will need to provide a valid sales invoice that is accurate, complete, and legibly filled out. The above warranty does not apply to the following.

1. Exceeding the validity period of the three packages.
2. Altered warranty card, product code does not match the product body
3. Failure or damage caused by misuse, abuse or improper transportation, use, maintenance or storage.
4. Failure or damage caused by force majeure (e.g. earthquake, war, fire, etc.) or accidents
5. Damage to zippers, towers, or buckles due to excessive force
6. Unraveling or tearing due to overloading.
7. Any damage caused by sharp objects
8. Products that show signs of burns or flooding.
9. Damage caused by unauthorized modification.
10. Aging, discoloration, wear and tear, cracks and other wear and tear that occur during normal use of the product.
11. This warranty will be void if the original labeling of the product is altered or destroyed.

The product and the accompanying materials are complete and intact appearance is not the scope of the warranty, you should receive the product on-site inspection and any discrepancies to raise objections.
The above warranty is our entire warranty in respect of the product and applies only within mainland China.
Nothing in this document affects the rights of consumers which cannot be excluded or restricted under the law.
Email: service@qscxsm.com.

Warranty card
Dear user, this warranty card is proof of your future warranty application. Please cooperate with the seller to fill it out and keep it properly for future use!

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>