TOPCRAFT GZB028DB 10×10 Feet Hardtop Gazebo with Single Roof Instruction Manual
- June 13, 2024
- TopCraft
Table of Contents
TOPCRAFT GZB028DB 10×10 Feet Hardtop Gazebo with Single Roof
Product Information
The product is a gazebo designed for outdoor use. It features a heavy-duty frame for stability and durability. The gazebo is not a toy and should not be assembled or disassembled by children. Adult supervision is required during assembly and disassembly. It is important to take precautions to ensure the safety of children and to prevent them from playing around the gazebo during these processes. The gazebo should not be leaned on or climbed before it is fully assembled. Additionally, it is advised not to stand under the gazebo during a lightning storm. If any parts show signs of instability or damage, the gazebo should not be used.
Product Usage Instructions
- Before starting assembly, read all instructions carefully.
- Ensure that two or more people are available for assembly.
- Prepare one or more ladders for assembly.
- Wear protective gloves and a safety hat before startingassembly.
- Find and use the hex keys provided in the box.
- A Phillips screwdriver is required for assembly.
- Do not fully tighten the screws until the assembly is complete.
- If necessary, use a drill for certain steps.
- Step 1: Connect Part A and Part B with screws as shown.
- Step 2: Connect Part C and Part C1 with screws. Hang 6 zipperheads on Part C and Part C1 respectively.
- Step 3: Connect Part C, C1, and A with screws.
- Step 4: Fix Part J in the position shown in the figure with screws. Then fix Part J1 under Part J with screws.
- Step 5: Fix Part G and G1 on Part A with screws.
- Step 6: Use screws to connect Part D to the four corners of Part K respectively.
- Step 7: Fix Part D and D1 to Part K with screws. Then fasten Part D1 to the four beams with screws. Fix Part D to the four Parts A with screws.
- Step 8: Cover Part K1 over Part K with screws as shown.
- Step 9: First, fasten Part E, E1, and E2 to Part D1 by screws as shown. Second, connect Part E1 and E2 to Part D with screws.
- Step 10: Insert Part M, M1, N, N1, P, and P1 into the orbit of Part D1 as shown in the figure.
- Step 11: Fasten Part R to the position of Part D or D1 as shownin the figure. Connect Part L, Part F1, and F2 with screws and fasten them to the position as shown. Connect Part L1, Part F1, and F2 with screws and fasten them to the position as shown.
- Step 12: Connect Part H and Part L1 with screw 3. Place the zipper head R in the track. Install Part T and S on Part R.
Instructions Before Use
READ ALL INSTRUCTIONS BEFORE USE
Warning & Attention
- This gazebo is not a toy.Children are not allowed to assemble or disassemble.Please take care of children,do not let them playaround when assemble or disassemble.
- Adults only for assemble or disassemble this product.
- This product is constructed with heavy duty frame,please do not lean or climb before it finish assembling.
- Even though our hardtop gazebo is sturdy,please do not stand under the gazebo during a lightning storm.
- DO NOT use this gazebo if any parts show signs of instability or damage.
-
Two or more people are needed for assembly.
-
One or more ladders are necessary.
-
Please wear protective glove before assembly.
-
Please wear a safety hat.
-
Find out and use the hex keys in the box.
-
A phillips screwdriver is required.
-
Please don’t fully tighten the screws prior to complete assembly.
-
You may need prepare a drill.
Parts And Tools
Warning
Installation Instructions
- Step1: Connect Part A and Part B with screws ③ as shown.
- Step2: Connect Part C and Part C1 with screws ①.
- Hang 6 zipper heads on Part C and Part C1 respectively.
- Step3: Connect Part C, C1 and A with screws ①.
- Step4: Fix Part J in the position shown in the figure with screws ②.
- Step5: Fix Part G and G1 on Part A with screws ①.
- Step6: Use screws ① to connect Part D to four corners of Part K respectively.
- Step7: Fix Part D and D1 to Part K with screws ①.
- Then pasten Part D1 to the four beams with screws ①.
- Step8: Cover Part K1 over Part K with screws ④ as shown.
- Step9: First,fasten Part E,E1,E2 to Part D1 by screws ① as shown.
- Step10: As shown in the figure, insert Part M, M1, N, N1, P and P1 into the orbit of Part D1.
- Step11: Fasten Part R to the position of Part D or D1 as shown in the figure below.
- Step12: Connect Part H and Part L1 with screw 3.
- Place the zipper head R in the track.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>