tekkiwear YS-219 Wireless Speaker and Karaoke Microphones User Manual

: July 22, 2024
: TeKKiWear

Table of Contents

Wireless speaker and karaoke microphones YS-219
- User’s manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wireless speaker and karaoke microphones YS-219

User’s manual

Parts and controls

On/Pause
Mode
Previous track/Volume (-)
Next track/Volume (+)
Change pitch
Reverb effect
Echo effect
Vocal cut
Auxiliary input port
USB device input port
TF (Micro SD) card slot
Charging port
Sound effects
Volume (+)
Volume (-)
Power ON/OFF
Charging port

Details of the function of the buttons

On/Pause: Press and hold to turn the power on or off. Press to pause or play music.
Previous track/Volume – & Next track/Volume +: Press to select the previous/next track. Press and hold to adjust the volume.
Mode button: Press to switch between Bluetooth mode, USB flash drive mode, MicroSD (TF) card mode and AUX mode.
Vocal cut: Press to remove vocals from a song and leave only the background music.
Reverb/Echo sound effects: Press to choose the corresponding sound effect. The default is the Echo sound effect.
Change tone: Press to switch between the original, male, female, child and magic sound effect.

How to use

Bluetooth function

1. Turn on the speakerphone: Press and hold the power button to turn on the speakerphone. The BT indicator will start flashing.
2. Bluetooth connection: Turn on the Bluetooth on your smartphone. In the Bluetooth settings, search for the device name “YSD Speaker” and pair it.
The speaker will beep if the pairing is complete and the BT indicator will show continuously on.
3. Turn on the microphone: Press and hold the power button on the microphone.
The microphone will connect to the speaker automatically and the corresponding indicator on the speaker will light up.
4. Adjust the sound effect: Adjust the volume of the speaker and microphones, choose the appropriate sound effects.
5. Play music: Open a music app on your smartphone and play the music you want. The music volume can also be adjusted on the phone. By pressing the vocal cut button you can remove vocals from the song.

Note: Once you pair the speaker with your smartphone via Bluetooth, it will automatically pair the next time you use it. Bluetooth can be turned off in your phone’s Bluetooth settings.

How to charge

When the battery is low. The device will automatically turn off.
Connect a 5V DC charger to the charging connector to charge the speaker or microphones. The charging indicator will turn red when charging and will turn off when fully charged.
It will take about 3 hours to fully charge the speaker and 1 hour for the microphone. Then they can work for 3-5 hours.