TeKKiWear Smart Bracelet User Manual

TeKKiWear Smart Bracelet

How to charge and depth the band

Follow the instruction above to depatch the band and charge.

Compatible OS and requirements

1. Android 4.4 and above
2. iOS 8.5 and above
3. Support Bluetooth 4.0 and above

Preparation

Please charge the smart band for 2- 2.5 hours before turning on the smart band first time. Battery sign will be shown on the screen while charging

Please charge the smart band once every three months if the smart band is idle

Scan the QR code to enter the app downioad

Connection Instruction

Mobile APP download Method

1. Method 1 : Scan the QR code above to downioad
2. Method 2 : Search “Wearfht2.0” in Android store or APP store to download and install.

FAQ

• Can’t find the smart or can’t establish connection?
  • Android system:
  • Please make sure the Bluetooth is turned on, and the Bluetooth sign is not on the smart band (The smart band are connected if there is Bluetooth sign.) Put the smart band and the device side by side, try to search and connect. The connection can be established on Android 4.4 and above.
  • Still unable to connect, enter settingApplication management-authorization management-application access authorization, find Weartit 2.0, allow al the access, enter into Setting again to turn on GPS location service, restart the phone, try to connect again.
  • IOS systerm
  • Please make sure the Bluetooth is turned on, and tne Bluetooth sign is not on the smart band (The smart band are connected if there Is Bluetooth sign. Pease Torget the device first). Go to setting Bluetooth forgot this device, after that the APP will be able to detect smart band.
• After binding the smart band, it shows not connected or remaining battery is 0%?
  • The smart band and the device is not connected SUccessTuly, please bind the devices again.
• No data shown on APP?
  • Pull down to refresh the main page, the data Will De syncnronized and shown on the APP. Automatic data synchronization will only be done on the hirst-time connection establishment. Afterward, the data will be synchronized automatically hourly. Besides, turn on the nourly measurement. The APP read the hourly data (steps, heart rate) from the smart band. Ihere Will De not data it the hourly measurement is off.

Functionalities

• Time mode : Body temperature, Displaying remaining battery, date and time, sleep time, steps(Date and time could not be set on the smart band. Date and time will be synchronized after connecting to the device), press and hold to change the interface.

• Pedometer: Automatically record step on daily basis.

• Calories: Automatically record calories consumption on daily basis.

• Distance: Automatically record walking distance on daily basis.

• Heart rate measurement: measure heart rate hourly, or measure heart rate manually.
  Press and hold to enter into heart rate measurement interface.

• Blood pressure measurement: measure blood pressure hourly, or measure blood pressure manually. Press and hold to enter into blood pressure measurement interface.

• Blood oxygen measurement: measure blood oxygen hourly, or measure blood oxygen manually. Press and hold to enter into blood oxygen measurement interface.

• Immunity measurement: the current immunity status can be automatically measured on the hour by APP, and the bracelet can be switched to the immunity interface and  pressed for a long time Enter to start the measurement, the measurement is completed automaticaly back to the corresponding interface.

• Sleep quality information interface: Measure sleep quality automatically daily.

• Smart reminder: Turn on the notification on the APP. Smart band will notify you when there are notifications, incoming calls, and text messages.

• Training mode : Press and hold the training mode interface to enter. Running, Alpinism, and cycling modes are built in. Press and hold to start record exercise time, calories burnt. Press to pause. Press and hold to exit current mode.

• Weather: The real-time weather condition will be synchronised with your device data and shown on the time display interface. The smart band needs to be connected to the APP and the device GPS function needs to turn on .

• More : Timer(Press and hold to enter or exit, press to start or pause), find my phone(press and hold to find, press to stop), press and hold to turn off, back(press and hold to return to time interface), QR code(scan the code to download the APP)

• Others: hand up to wake up screen, sedentary reminder, do not disturb mode, shake to take photo, hourly measurement, WeChat sport, Apple health, match language automatically.

Specification

• Screen size 1.4 inchees
• Bluetooth Blueteeth 4.0
• Waterproof Level IP67
• Battery Type Polymer Battery
• Battery capacity 90mAh
• Charging time 2-2.5 hours
• Wrist band size 251mm18mm2.5mm
• Charging method Micro USB
• Packing Smart band+instruction

Remark

• if there is any problem with the quality of the product or the use of the product, please contact the store directly, we will deal with it quickly.
• The measurement results of this product are tor rererence only and are not intended for any medical use or basis. Please follow the doctor’s instructions and must not self -diagnose and treat according to the measurement results., the product waterproof rating is IP6/, can be used Tor waterproonng, not for diving and for a ong time in the water.
• In addition, this product does not prevent hot water, because water vapor will affect the ring
• The company reserves the right to modity tne contents or this manual without prior notice
• Some functions are different in the corresponding sottware version, which is normal.
• This product contains a polymer battery. Do not place this product in a high temperature environment for a long time. Do not place this product in an open flame.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>