tekkiwear DAM Watch 8 PRO User Manual
- October 30, 2023
- TeKKiWear
Table of Contents
tekkiwear DAM Watch 8 PRO
Product Information
The DAM Watch 8 PRO is a smartwatch that allows you to stay connected with your smartphone. It features a touch screen interface that displays the status bar, commonly used functions, notifications, and split-screen mode. You can easily switch between watch faces and customize the watch band. The watch comes with a wireless charger that supports mobile phone chargers within 5V and computer USB port. It takes about 3 hours to fully charge the watch. The watch connects to your phone via Bluetooth and requires you to download the App on your phone. You can receive notifications for incoming calls, SMS, WhatsApp, WeChat, and other apps. The device also supports Bluetooth calls, and you can control the phone to make or receive calls directly from the watch. Additionally, you can add frequently used contacts to the watch phonebook from the App. The watch also has a Blood Pressure Function, which provides a result after measuring and reading for about 45 – 50 seconds.
Product Usage Instructions
- To switch between watch faces, hold the home screen.
- To change the watch band, press with one hand on the back case button and push the strap out with the other hand.
- To charge the watch, place it on the charging puck and it will automatically charge. A full charge takes about 3 hours.
- To connect the watch to your phone, download the App on your phone and turn on phone Bluetooth and App. Confirm that notifications and other permission app asks are enabled, fill up personal information, tap Add device, search Watch8 device (turn on the GPS in the smart phone before binding) and tap connect.
- To receive notifications, select the corresponding Apps and turn ON the switch in App — Device – Notifications. If you’re not receiving any notifications, make sure that your phone is able to receive notifications of the corresponding Apps and has the notification permission turned ON in phone settings. If the problem persists, reset the watch to factory setting, enter the Bluetooth settings in the phone, and check if it’s connected device has Watch8. If so, please unpair, turn OFF the phone’s Bluetooth, then turn it ON again to reconnect. If none of these steps work, uninstall the App and download it again.
- To upgrade firmware, connect the watch to your phone via Bluetooth and tap Device- Firmware version in App. It will remind you if there’s a new version available for update. During the updating process, do not operate the watch. It takes 3-5 mins.
- To make or receive Bluetooth calls, tap the Bluetooth call icon in the drop-down menu and connect to watch in phone-Settings-Bluetooth-search for Watch Call. You can turn off the Bluetooth call audio to extend the use time.
- To synchronize language/date/time between your mobile phone and the Smart Watch, connect them through Bluetooth.
- To use the Blood Pressure Function, put your hands flat on a surface and do not move. When this function is activated, it needs about 45 – 50 seconds of measuring and reading to provide a result. Please note that the device is not a medical device and any values shown are for reference only.
Thank you for choosing our product! To have a comprehensive understanding and using this device, to know all the features and simple operation method, please read this manual first. The functions on the user manual may be little different with physical, please make the final products as the standard. The typing errors in this manual and discrepancies will be timely updated with the latest products. If we have updates, this manual will be subject to change without notice. Our company reserves the right of final interpretation.
Remark
This product has a built-in rechargeable lithium battery. Safety warnings for
battery use: do not disassemble, strike, squeeze or put into fire; if it is
severely swollen, do not continue to use it; do not place it in a high
temperature environment; do not use the battery after it is immersed in water.
Do not use it when have a hot shower/bath or sauna, the vapors will get into
the host, scratch damage of peripheral components. All these are beyond the
scope of the warranty.
This product is not a medical device. The health data and suggestions provided
are for reference only, not as a basis for diagnosis and treatment.
Operation Guide
- Upper crown: Scroll to zoom in/out the smart menu, or switch the watch faces, tap enter the main menu, double tap to switch the menu style.
- Bottom button: Hold the button to ON/OFF the device; short press the button to light the screen when screen off.
- Touch instructions: Tap to enter each function, swipe right to return; At home page swipe down to enter the status bar, swipe up to the notification center, slide left to enter the favorite functions, swipe to the + add favorite functions. swipe right to main menu.
Touch instructions
- Status bar
- Commonly used
- Notifications
- Split screen
Watch face switch
Watch face switch: Hold the home screen to change the different watch faces.
Watch band
- PRESS
- PULL
Strap change: One hand press back case button, another hand push the
strap out.
Charging instruction: This product adopts a wireless charger that
supports mobile phone chargers within 5V and computer USB port. Put the watch
on the charging puck and it will automatically charge. A full charge takes
about 3 hours.
Connection
Watch connects to Phone, download the App in the Phone at very first, reference following 2 methods.
Android/i0S Phone: Scan following QR code image by browsers or by any Scanner to Download.
After installation, turn on phone Bluetooth and App, confirm the notifications and others permission app asks are enabled, and fill up personal information. Tap “Add device”, search “Watch8” device (turn on the GPS in the smart phone before binding) and tap connect.
Message settings
In App — Device – Notifications, select the corresponding Apps, turn ON the
switch.
What if I don’t get the notice?
- The watch’s notification only synchronous phone notifications from notification center, such as incoming calls, SMS, WhatsApp, WeChat etc., if the phone doesn’t receive notifications in notification center, then the watch cannot receive them either, it must set as phone able to receive notifications of the corresponding Apps, turn ON the notification permission in phone setting.
- If still not receiving any notification after step (1 ). Reset the watch to factory setting, enter the Bluetooth settings in the phone, and check if it’s connected device has “Watch8”. If so, please unpair, turn OFF the phone’s Bluetooth, then turn it ON again to reconnect.
- If all above 2 steps cannot solve the notification issue, uninstall the App and download it again. Remember agree all permissions App asks when the installation done and very beginning turn the App on, and then reconnect again.
Main Features
Firmware upgrade:
As Bluetooth connected, in App, Tap “Device- “Firmware version”- it will
remind you if there’s a new version available for update. During the updating,
it will show a process bar, wait it until complete. Watch will restart and
reconnect the phone App. Do not operate the watch during the update. It takes
3-5 mins.
Call:
This device supports Bluetooth calls, and the watch controls the phone to make
or receive calls. Tap the Bluetooth call icon in the drop-down menu, in phone-
Settings-Bluetooth-search for “Watch Call” and connect to watch. The Bluetooth
call audio can be turned off, then watch cannot make or receive Bluetooth
calls, and the low power consumption mode is turned on by default, which can
extend the use time.
Phonebook:
After connected to the phone App, you can add 10 frequently used contacts to
the watch phonebook from the App.
Language/Time/Date:
Synchronizing of language /date/time between the mobile phone and the Smart
Watch after being connected.
Blood Pressure Function:
Please put your hands flat on a surface and do not move. When this function is
activated, it needs about 45 – 50 seconds of measuring and reading to provide
a result. [Please note: The device is not a medical device. Any values shown
are for reference only.]
Standby watch faces:
There are couples of watches faces for options, long press 3 seconds at home
screen to switch different watch faces; also allows download new watch faces
in the App; it is able to customize your photos as watch face background.
Sleep monitor:
Sleep monitoring will be automatically active from 10:00pm to 8:00am the next
day. You can check the details of sleep quality with the app in the phone.
About:
Check model number, Bluetooth address, version number.
Exercise:
Select a sport mode to record your workout. Enter to start the activity, slide
right to pause the workout, tap to end the workout. It records the duration,
calories, heart rate, etc.
Notifications:
Synchronizing and display of app notifications such as Facebook, WhatsApp,
SMS, Email etc., between the mobile phone and the Smart Watch. Up to 8
notifications can be displayed on the watch. Please adjust the settings in the
Fundo app and allow notifications to be displayed (app permissions). It is
able to decline incoming calls via watch.
Reset:
Tap to reset all data (factory mode). Activity info: Showing the workout and
health data including Steps, Distance, Calorie’s consumption. This data will
be saved until midnight (12:00 am) every day and then reset to 0 values for
coming day. You can look up previous data in History.
Heart Rate Monitoring Function:
When this function is activated, the heart rate is being measured by the
device scanning the surface capillary of the skin with green optical diodes
Please allow for about 2 seconds to start measuring and recording. Slide to
other menus to stop measuring. Please refer to information about average heart
rate, heart rate while exercising for your age group and gender online and/or
ask your medical practitioner for advice. [Please note: The device is not a
medical device. Any values shown are for reference only.]
Female Period:
Set your own period time, better remind to manage your health.
Stopwatch Function:
Press the start and pause, again press for stop.
Blood Oxygen Function:
Blood oxygen (SPO2H) level is the amount of oxygen circulating in the blood.
Please refer to information about healthy or abnormal blood oxygen percentage
for your age group and gender online and/or ask your medical practitioner for
advice. [Please note: The device is not a medical device. Any values shown are
for reference only.]
Alarm Function:
You can set several alarm times via the Fundo app on the phone.
Sedentary, drink reminder:
Via the App set a time for exercise and/or a reminder to drink.
Find Phone Function:
As the device and phone are connected, the Find Phone Function can support
locating your mobile phone. Tap “Find Phone” and locate your phone via the
ringtone/sound coming from your phone.
Wrist Wakeup:
You can “wake up” the watch with wrist movement. Please set this function with
the app. Please note that this might increase power consumption.
Electrocardiogram (ECG) Function:
The device combines an optical heart rate sensor and ECG sensor to show
information about the user’s heart function for reference. When this function
is activated it needs about 30 seconds of measuring and reading to provide a
result at the App to review. [Please note: The device is not a medical device.
Any values shown are for reference only.]
Remote Control (Music):
Allows to activate and control music playback on the phone via the Smart Watch
(a music playback app should be installed on the phone).
Extent of Warranty
This warranty only covers defects in workmanship or parts. All defective products or parts will be repaired or replaced. The warranty does not cover repairs or replacement of wear items, such as batteries and belts, due to natural wear and tear
Not Included in the Warranty Terms
This warranty does not include:
- Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, loss of parts, tampering or attempted repair by a person not authorized by the distributor.
- Any product that has not been installed, operated or maintained in accordance with the manufacturer’s instruction manual provided with the product.
- Any product that has been used for purposes other than the intended use.
- Any damage caused by improper power input or improper cable connection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>