tekkiwear DT3 SmartWatch User Manual

Smart Watch DT3
User Manual

Understanding the watch

Note: If long press power button does not start the watch, please charge the watch before trying again to start it

1. Heart rate sensor
2. ON / OFF key
3. Multi-sports mode shorcuts key

Install the APP

1. Confirm startup is normal
2. Use your mobile phone to scan the QR code below, download and install the APP. (Please attach the QR code downloaded by the APP)

http://dt1pro.cn/app-download/wearpro/index.html

Points to Note:

1. In order to achieve a better user experience, please prompt to upgrade the APP to the latest version in time.
2. The system requirement is Android 5.0 or IOS 10.0 or above

Connection

1. Open the APP on your phone, register or log in to your account.
2. Select the device you want to connect from the device list, and pair to connect according to the APP prompt.
3. After connected, check if the time display correct, and set up relevant functions according to your needs.

Note: Do not pair directly via Bluetooth in the phone settings.

Watch charging

This product is magnetic attach charging, please use the standard charging base for charging.
Align and fit the charging port to the metal contacts of the charging base until the charging power indicator appears on the watch screen.

Note：

1. Please use the charging base that comes with the package to charge.
2. Please dry the charging port before charging.
3. Connect the USB interface to a mobile phone charger with an
4. Output current of more than 1A or a computer USB interface for charging

Dissasembling & assembling the watch strap

1. Adjust the length of the strap according to your wrist’s size.
2. If you need to disassemble the strap, please refer to the picture below.

Note:

1. After installing the strap, please pull the strap properly to ensure that the strap is installed successfully.
2. The leather strap is not waterproof, avoid contact with liquid; when wearing it in water contact scenes such as swimming, please replace it with a metal strap or a silicone strap

Wearing

1. Do not wear the watch too tightly or too loosely. Make sure the skin have space for ventilation. This will not only make you feel comfortable, but also make the sensor work.
2. In the process of measuring blood oxygen saturation, please wear the watch correctly, do not wear it on the condyle of the wrist, place your arm flat, keep the watch and the wrist skin comfortable (wear it tightly), and keep your arm still during the whole measurement. . Affected by external factors (sagging arms, shaking arms, excessive arm hair, tattoos, etc.), the measurement results may be inaccurate, or the measurement values may not appear.
3. You can tighten the watch strap during exercise and loosen it appropriately after exercise. If your watch will shake on your wrist, or the sensor cannot read the data, try tightening the strap a little bit.

Basic Parameters

Product Name: DT3 Smart Watch
Working environment temperature: 0℃-45℃
Equipment requirements: Android 5.0 or iOS 10.0 and above.
Wireless connection: BT5.0, BLE
CMIIT ID: 2020DP1862
Input: 5v –50OmA MAX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>