tekkiwear T58 Depilator Instruction Manual

Operation manual of Depilator – T58

Thank you for purchasing this product. In order to avoid injury caused by misuse, you should first use this product read the operation manual carefully and use the product in strict accordance with the purpose indicated in the operation manual.

Product overview

1. Socket;
2. Switch key;
3. Display;
4. Flash button;
5. Refrigeration button;
6. Skin contact surface;
7. Light outlet;
8. 2cm² light outlet*;
9. 1cm² light outlet*;
10. Disinfection base
    the 2cm² light outlet it can be used en sensitive parts, such an armpit, facial fluff, bikini line, etc.
    the 1cm² light outlet it can be used en small parts, such lips fluff , finger/toe fluff…

Display

1. Flash times;
2. Cooling icon;
3. Auto flash icon;
4. Gear display icon

Disinfection base

1. USB charging port;
2. Disinfection button;
3. Indicator light;
4. Disinfection lamp

Principle elaboration

The instrument adopts international advanced photon cosmetic IPL technology and uses strong pulse light to directly irradiate the skin to produce photobiochemical effect. On the one hand, it can regenerate and rearrange the collagen fibers and elastic fibers in the skin, restore skin elasticity, improve facial microcirculation and eliminate or reduce wrinkles; On the other hand, the intense pulsed light can penetrate the skin and be preferentially and selectively absorbed by the pigment groups and capillaries in the tissue. The heat energy can coagulate the blood and destroy the pigment groups by thermal decomposition without damaging the normal skin tissue, so as to treat the telangiectasia, remove the color spots, and remove the excess hair.

Irradiation intensity setting

This product is specially developed for family hair removal, so its light energy is softer and provides five light energy with different intensities. You can adjust the gear to make it suit-able for your skin and body hair color, and make yourself feel comfortable. Please select the appropriate gear according to the following comparison card.
1. Please refer to the table below to determine which light is suitable for your skin and hair color 2. If you feel any pain or discomfort, lower the gear. People with darker skin are more likely to develop skin allergies because the skin absorbs more light. Therefore, people with dark complexion are advised to use lower gears. Light on the skin may feel warm or hot, but it should not be pain.
Skin Color

1. White,
2. Yellow,
3. Ligth Brown,
4. Medium Brown,
5. Dark Brown,
6. Dark Brown or Darker.

Hair Color

1. White/gray,
2. Gules,
3. Light gold,
4. Dark gold/Light brown,
5. Brown,
6. Dark Brown,
7. Black

For skin colors between tones 1 and 3 (white and light brown) with hair colors between tones 4 and 7 (dark gold and black) we recommend the use of gears between 1 and 5, in the case of skin color 4 (medium brown) we recommend lower gears only between 1 and 3; we insist on remembering that as the skin tone is darker it is also much more sensitive to light and you should use softer gear intensities, if your skin tone is very dark we do not recommend the use of this equipment. Consult a specialist.

Safety precautions

• Special attention · Please be sure to decorate and use the product in accordance with the regulations contained in the user manual. Please read the operation manual carefully and keep it for future reference.

• If you have any questions during use, please contact online customer service
  Danger: contents related to personal injury caused by wrong operation.
  Warning: incorrect operation will lead to dangerous contents.
  Note: incorrect operation may cause personal safety or property damage.
  Note: it is forbidden to use it in bath or shower.

• Warning: do not use this product near the bathtub, forest bathtub, washbasin or other water containers. Please keep this product and power adapter dry;

• If the product is damaged, do not touch any internal parts to avoid electric shock;

• Do not insert any object into the product, and do not place the product at will;

• When you need back hair removal, you may need an assistant or partner, which is our suggestion, because we are worried that you may have risks if you use it alone; If your hair is longer than 1 mm, please shave first. Excessive hair absorbs heat on the skin surface, which will cause skin redness and swelling, and hair burning will produce peculiar smell, which will affect your use experience of the product;

• If the skin of the irradiated part is not dry and clean, the use effect will be affected, and the product may not flash or Flash accidentally;

• We lack the data on the use of the product on children under the age of 15, so we ask you to pay attention to prevent children under the age of 15 from contacting the product, and please stay away from children under the age of 15 when pretending. Please use different light intensity gears for different body parts as required, because their skin color is different; Expected service life of depilator: the effective light output is 990000 times;

• If the product is suitable for more than one person, wipe the machine with a dry cloth before each use, and wipe the smooth mouth repeatedly with a few drops of high concentra-tion alcohol (no more than 96%).

• If the power cord is damaged, it must be replaced by professionals from the manufacturer’s maintenance department or similar department in order to avoid danger

Warning

• Do not use antiperspirant immediately after irradiating the armpit; Please regularly confirm and clean the dirt at the irradiation port to avoid scalding and failure during use;
• Do not put the irradiation port close to objects easy to demagnetize, so as to avoid hidden and damage; · Do not use it when the vent is blocked to avoid smoke and fire;
• Do not face the irradiation port towards the black object, so as to avoid the normal opera-tion of the machine;
• Do not irradiate clothes, hair and other articles to avoid blackening, discoloration and damage; Do not use it on pets to avoid injury;
• Do not use this product around the eyes to avoid eye injury;
• After use, please wipe the hair and skin care products attached to the depilator to avoid failure and skin damage;
• Do not use it with children. The hair remover will emit strong light and easily hurt your eyes; Please set the irradiation intensity according to your skin condition. Be sure to use it from gear 1 for the first time; If the skin is slightly hot and red after use, it is normal; The product cannot be left unattended after startup. Please shut down in time after use;
• Clean the skin to ensure that the skin surface is free of hair residue, completely dry and free of oily substances and stains;
• If the ambient temperature difference reaches more than 20 degrees (from low-tempera-ture environment to high-temperature environment, or viceversa), please shut down the instrument and let it stand for about 2 hours before use; Do not use near inflammable and explosive materials, including sprayers and gas station, etc., and are liable to cause fire and electric shock injuries. Any unauthorized modification is prohibited, which may lead to unacceptable risks.
• The ambient temperature of this depilator is 5-40 °C, please confirm the room temperature before using; Within 24 hours after irradiation, please avoid direct ultraviolet radiation on the irradiated part;
• Do not expose the product to the sun or ultraviolet lamp for a long time, which will seriously damage the product;
• If the built-in fan does not run after turning on the power supply (the sound of the fan cannot be heard), do not use it, so as not to cause smoke, fire and other faults.
• Do not carry out maintenance or repair during use. After use, shut down the machine, unplug the power socket and wait for the machine to cool for maintenance or repair. Unsuitable population
• Pregnant women, women breastfeeding, menstrual period, skin scars, diabetes, vulnerable skin and light sensitive skin should not be used.
• Severe heart disease, moderate and severe hypertension, malignant tumor, folliculitis, infectious skin disease, burn skin and anticoagulant disorder are prohibited; Do not use if you have abnormal collagen metabolism, including a history of scar and poor wound healing;
• Do not use if there are varicose veins and vasodilation at the irradiation site with cardiac diseases;
• Do not use if your skin is sensitive to light and prone to rash or allergy;
• Do not use if the irradiation site is infected, herpes simplex, skin lesions and hematoma;
• Do not use for diseases that inhibit immune response (including HIV / AIDS infection, lupus erythematosus, porphyria, etc.);
• It is forbidden for any patient with hemorrhagic disease, and it is forbidden for external use of isotretinoin, fruit acid (AHA), salicylic acid (BHA) or Rhododendron acid; For those who use chemical depilation within 30 days, those who have used skin whitening products in a short time or cosmetics containing vitamin A, please use them with caution;
• Do not use it at the same time as the essential oil products. Please make sure that the skin is clean, dry and free of emulsion, lubricant and other cosmetics.
• If the skin surface is not clean and dry, it may affect the use experience of the product and even damage the product;
• It is forbidden to take aspirin, immunosuppressant, isotretinoin and other drugs. It is forbidden to use light sensitive drugs recently (such as tetracycline and sulfonamide, etc.)

Do not use for the following body parts or under the following conditions

1. inside the mouth, pudenda, mucosa, etc.
2. plastic and surgical sites
3. Adam’s apple
4. eyeball, eyelid and around eyes
5. head
6. acne area
7.  spots and moles
8. eyebrows and hair
9. ear
10. nipple, areola
11. inside navel
12. great vein
13. tattoo and body painting

(Note: this list is not exhaustive. If you are not sure whether you can use this product, you are recommended to consult a doctor)
Matters needing attention

1. Do not use this instrument for natural black skin
2. Do not expose to the sun before depilation
3. Please shave before depilation (do not use chemical depilation)
4. Be sure to start from the first gear when using it for the first time
5. When depilating, make sure that the depilation outlet is close to the skin, and then depilate
6. It is forbidden to use in dark environment
7. Do not use in direct sunlight to avoid machine failure
8. Do not hit and shake the product violently
9. Do not unplug the plug directly without turning off the machine, so as to avoid damage to the machine

Note: when using the depilator to stop halfway, be sure to place the air inlet upward and the LCD downward, which is conducive to better heat dissipation and cooling of the depilator.

Getting started

Preparation for use

1. Please remove the hair on the surface of the skin first. After wetting the hair, use the wet scraping method to do a good job in the pre-treatment of the skin. This can make the hair under the skin absorb into the light source and ensure the effect of the treatment. If the hair does not exceed 2mm, the instrument can be operated directly without shaving.
2. Clean the skin and make sure there is no hair on the surface, completely dry and free of any oily substances. Before using the photon hair remover, it is strictly prohibited to apply condensing agent, aloe gel and other products, otherwise it will cause no light (only large equipment in beauty salons need to be applied, and household ones do not need to be applied)

Key description

1. Switch key: long press 1.5s to start / shut down. After starting up, the display screen displays the flash times icon and file bitmap at standard / low gear, the blower inside the machine starts to work. Briefly press upshift / downshift, 1-5, 5-1, and cycle in turn.
2. Flash button: the default manual flash mode is startup. Short press once to flash once, and long press 1.5s to enter / exit the automatic mode in the light out mode, the automatic flash icon on the display screen is on / off for a long time. After entering the automatic flash mode, slide the flash.
3. Refrigeration button: after power on, there is no refrigeration output by default (the refriger ation icon on the nixie tube is not displayed). Short press the refrigeration button to turn on turn on or off the refrigeration function, and the refrigeration icon on the display will be on or off.
4. Disinfection base: gently press the host into the base and press the disinfection button. After the base indicator light is on for about 10 minutes extinguish after left and right to com-plete head disinfection.

Use steps

1. Before taking out the instrument, please clean the head filter of the machine with a soft cloth.
2. Before depilation with this instrument, please wet the hair first and then scrape it with a hair scraper.
3. After inserting the adapter, the display flashes for 3 times and displays off to enter the standby state.
4. Press and hold the switch key for 1.5s, the display will light up, the blower inside the machine will start working, and the instrument has been started at this time.
5. If the content of the display changes from “flashing” to “always on”, it means that the energy of the hair removal instrument is ready (the first flash is bright, and the eyes may not adapt. Please wear goggles to reduce the discomfort of the flash to the eyes).
6. The content of the display screen is “normally on”, and the instrument is in the [flash ready] state; If there is no change in the content of the display, then try unplugging the power adapter and restarting the machine.
7. Press the depilator vertically on the skin at an angle of 90 ” to ensure that the skin is in full contact. At this time, the “number” in the display screen will “flash” (when using the depilator for the first time, there will be a feeling of “micro current” because the skin is not suitable, which is the normal reaction of the human body and not caused by machine power leakage).
8. After the machine is close to the skin, gently press the “flash button” of the instrument, and the instrument will emit a flash accompanied by a crisp “crackle”. At this time, you will feel the warmth generated by the flash synchronously (if the temperature is too high, you can briefly press the refrigeration button to start the refrigeration mode. If the temperature is still too high, it means that the gear you selected is too high, and it is recommended to start from the first gear).
9. After the instrument emits a flash, replace the depilation part. When the energy is ready, the “gear indication” in the display screen will be “normally on”, and then repeat the above “step 7”
10. Use the first gear to test the skin. If there is no adverse reaction after 24 hours, briefly press the “switch button” to adjust the energy gear. The energy gear is divided into 5 gears.
11. Cycle according to the above steps to depilate the part you choose. A depilation course is generally polished three times. Take off the whole body first, and then do the second and third times.
12. Please flash as close as possible to the previous flash part, so as to fully deal with the required part.
13. The product is equipped with automatic shutdown. In case of no flash, it will be automatically shut down for 5 minutes. If it continues to be used, it will be recorded according to the last flash time, automatically shut down after 5 hours and cycle in turn. If you are not using the product, you must unplug the power socket to avoid damaging the machine and causing injury.
14. After use, please long press the “switch button” to shut down (after shutdown, the product will enter the shutdown countdown) the screen will enter the word “off’, unplug the power socket, and put the instrument into the disinfection base for light outlet disinfection.

Mode introduction Continuous play mode (applicable to large areas such as arms and legs):
Place the light outlet in the skin holding treatment area and fully fit with the skin. At this time, the touch sensing state of the display screen flashes, indicating that the lamp cap is in full contact with the skin. After long pressing the flash button for 1.5s, the automatic mode icon on the display screen will be on for a long time, and start moving the instrument slowly and evenly on the skin to keep fit with the skin. The flash will be sent out at a certain inter-val.
Please keep it safe at this time Move with the depilator and slide the clothes back and forth in the area to be depilated for 2 times to ensure that the depilated area is evenly covered and avoid missing polishing.
*Tip: the moving speed of the skin can be adjusted according to the flash speed, so that the coverage is more uniform. The flash frequency of the first gear is faster, and the flash frequency of the second gear is slightly slower. The higher the gear, the slower the light speed.
Singles mode (applicable to small areas such as fingers and lip hair):
Place the light outlet in the skin to be treated area and fully fit with the skin. At this time, the touch sensing state of the display screen flashes, indicating that the lamp cap is in full contact with the skin. Short press the flash button to start depilation. Move the lamp cap to the next skin, wait for the gear icon on the display screen to be on for a long time, and then press the flash button to repeat the above operations in turn.
*Tip: at any time during the depilation process, if your skin starts to feel overheated, just pause for a few seconds to let the smooth mouth cool again, and then depilate.
Efficacy cycle reference table
1-4 weeks
2-3 times a week More than 75% hair Start to fall off naturally
5-6 weeks Twice a week New hair loss And inhibit growth
7-8 weeks
Once a week Hair becomes thinner and less, No rebound
More than 8 weeks
1-2 times a week According to the hair growth state, Selective use (hair growth) You can make it again at the beginning Use until no longer long)

Post use cart
Precautions after depilation

• It is recommended to avoid touching water within 6 hours after hair removal, and then use moisturizing water to moisturize the irradiated parts.

• After skin hair removal, do not use perfume, facial mask and cosmetics containing frosted beads.

• Please avoid UV exposure within 24 hours after hair removal. If necessary, please apply sunscreen.
  – Artificial skin whitening during hair removal is not allowed.

• If you need plastic surgery after depilation (refer to depilation area only), please consult your doctor.

• If you feel unwell, consult your surgeon.

Cleaning and maintenance

In order to ensure the best effect and longest service life of the product, please clean the product before and after each depilation to avoid long-term accumulation of hair and dust. If you do not clean normally, the product will not get its due effect.

• Before starting cleaning, the equipment must be turned off and the power must be unplugged to allow the machine to cool down.
• Wipe the machine body and disinfection base with soft, clean and dry cloth.
• After cleaning, store it in a dry and ventilated place and store it in a dust-free environ-ment of – 20-50 °C.
• Do not wash this product and accessories in the faucet and dishwasher.
• Do not use steel ball, abrasive cleaner (toothpaste, etc.) or corrosive liquid (gasoline, engine oil, acetone, etc.); To clean the product. Note: if the water cleaning effect is not good, you can use a few drops of high concentra-tion alcohol (no more than 96%) to clean the above parts.

Environment protection
When disposing of products, please do not throw them together with general domestic waste, but hand them over to the designated recycling center, which is conducive to environmental protection.
Troubleshooting
This chapter outlines the most common problems encountered in using this instru-ment. If you cannot resolve the problem by using the following information, please contact the customer service center in your country.
* The device/power adapter becomes warm during use*
This is a normal phenomenon
There is no need to take any action.
I put the depilator on the skin and the number flashed], but the cooling fan started running.
Overheat protection has been activated. When the overheat protection starts, the fan still runs continuously. Do not turn off the power of the device, please wait for it to cool for more than 15 minutes before continuing to use.
[Flash ready] flashes, but the device does not flash when the flash button is pressed.
The device needs to be reset. Reset the device, turn the power off and back on. It smells had when using the device. You have not completely removed the hair from the treatment site. These hairs may burn and produce a bad Please remove the hair on the surface of the skin before using this instrument
During the course of treatment, the skin feels more sensitive than usual / unbearable pain when using the device.**
The light intensity setting you are using is too high Please check to make sure that the appropriate light intensity setting is selected. Please lower the setting if necessary.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>