VEVOR SH-001-BL Drum Set Instruction Manual

VEVOR SH-001-BL Drum Set

Specifications

• Model: SH-001-BL, SH-001-BK
• Product: Drum Set

Product Usage Instructions

Important Notices
Before operating the drum set, please take note of the following:

• Do not stand on or use any part of the product as a step ladder.
• Ensure all bolts, screws, and knobs are firmly secured before use.
• Regularly check and reconfirm the security of bolts, screws, and knobs every 90 days.
• Avoid using or storing the item near open flames or flammable/combustible chemicals.
• If any parts are missing, broken, damaged, or worn, stop using the item until repairs are made.
• Do not use the item in a way that contradicts the manufacturer’s instructions to avoid voiding the warranty.

Tools Required
Make sure you have the following tools ready before assembling the drum set:

• Drum Key

Product Assembly Steps

1. Place the large tom drum head and hoop on the large tom drum shell.
2. Attach the large tom drum hoop/head using tension rods and washers.
3. Place the bass drum head and hoop on the bass drum shell.
4. Attach the bass drum hoop/head with tension rods and washers.
5. Insert two bass legs into the bass drum and tighten the wing nuts.
6. Stand the bass drum up on its legs and insert two tom holders into the top of the bass drum.
7. Insert the small tom and large tom onto the tom holders.
8. Insert the cymbal stand into the designated slot and secure it with wing nuts.
9. Assemble the pedal and attach it to the bottom of the bass drum hoop.
10. Place the drum throne on the drum throne stand and secure it with wing nuts.

Frequently Asked Questions (FAQ)

1. Q: How often should I check the security of bolts, screws, and knobs?
   A: It is recommended to reconfirm the security of all bolts, screws, and knobs every 90 days to ensure safe usage.

2. Q: What should I do if any parts are missing or damaged?
   A: If any parts are missing, broken, damaged, or worn, please stop using the item until repairs are made and factory replacement parts are installed.

Technical Support and E-Warranty Certificate
www.vevor.com/support
We continue to be committed to provide you tools with at competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

Model: SH-001-BL, SH-001-BK

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

NOTICE

• Do not stand on or use any part of this product as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges .lf any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.

TOOLS REQUIRED

PARTS

PRODUCT ASSEMBLY

1. Place large tom drum head and large tom drum hoop on the large tom drum shell.

2. Attach the large tom drum hoop/head with tension rods and washers

3. Place bass drum head and bass drum hoop on the bass drum shell.

4. Attach the bass drum hoop/head with tension rods and washers

5. Insert two bass legs into the bass drum. Tighten the wing nuts to secure the leds.

6. Stand the bass drum up on its legs,insert two tom holder into the top of the bass drum. Tighten the wing nuts to secure the leds.
   NOTE: Make sure the arms face opposite directions.

7. Insert the small tom and large tom on to the tom holders.
   Tighten the wing nuts to secure the leds.

8. Insert the stand from the cymbal set into the designated slot. Tighten the wing nuts to secure the stand.Remove the wing nut, washer, and top pad from the stand, place the cymbal, then replace the top pad, washer, and wingnut.

9. Assemble the pedal.

10. Put the pedal to the bottom of the bass drum hoop and tighten the pedal screw.

11. Place the drum throne on the drum throne stand. Tighten the wing nuts to secure the drum throne,

WARNING:
Manufacturer and seller expressly disclaim any and all liability for personal injury,property damage or loss,whether direct, indirect, resulting from the incorrect attachment,improper use, inadequate maintenance, unapproved modification, or neglect of this product.

CHOKING HAZARDS-
small parts not for children under 6 yrs.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom

Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>