marta MT-HP4231A Electric Stove User Manual
- July 21, 2024
- MARTA
Table of Contents
marta MT-HP4231A Electric Stove
Specifications
- Model: MT-HP4231A
- Power: 1300W
- Features: Electric stove with control panel, legs, and plate
Product Usage Instructions
Safety Precautions
Before using the electric stove, ensure the following safety precautions:
- Keep the appliance away from water and flammable materials.
- Do not touch the hot surfaces without protection.
- Unplug the stove when not in use and during cleaning.
Operating Instructions To operate the electric stove
- Place the appliance on a stable, flat surface.
- Connect the stove to a power source using the provided cable.
- Turn the control panel to the desired temperature setting.
- Place cookware on the plate and start cooking.
Cleaning and Maintenance
After each use, make sure to clean the electric stove:
- Allow the stove to cool down before cleaning.
- Use a damp cloth to wipe the surfaces of the appliance.
- Avoid using abrasive cleaners that may damage the stove.
Troubleshooting
If you encounter any issues with the electric stove, refer to the user manual
for troubleshooting steps. Common error codes include:
- E0: Indicates a power supply issue.
- E1: Indicates a temperature sensor problem.
- E2: Indicates a heating element malfunction.
- E3: Indicates over-heating (>280°C).
- E4: Indicates a general error.
Frequently Asked Questions (FAQ)
Q: What should I do if the stove displays an error code?
A: Refer to the user manual for troubleshooting steps based on the specific
error code displayed.
Parts list
- Body
- Plate
- Legs
- Control panel
IMPORTANT SAFETY INSTRUCTIONS
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
- The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
- Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
- When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.
- Do not operate the device without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.
- The device and the mains lead have to be checked regularly for signs of damage. If damage is found the device must not be used.
- Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have faulty cable be replaced only by the manufacturer, by our customer service or by qualified person and with a cable of the same type.
- Use only original spare parts.
- To avoid damaging it, do not place any rough or uneven objects onto the surface.
- Prevent any hard or pointy utensils from falling onto the surface.
- Do not place the appliance near objects which are sensitive to magnetic fields (e.g. radio, TV).
- Place the unit onto a level surface resistant to moisture and heat.
- In case of sensitive surfaces, place a heat-resistant plate under the unit.
- Because of the rising heat and vapors, do not operate the unit under suspended cupboards.
- Keep a sufficient safety distance (30 cm) from easily flammable objects like furniture, curtains, etc.!
- Do not heat empty cooking utensils on the hotplate, as this can lead to dangerous over-temperatures.
- Do not move the device when it is in use.
- During use, ensure that the mains lead does not come into contact with hot sections of the device.
- Do not touch the hot parts of the device.
- Please do not operate the device with an external timer or a separate remote control system
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
- In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
- This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufficient knowledge and/or experience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.
- Children should be supervised at all times in order to ensure that they do not play with the device.
SPECIAL SAFETY INSTRUCTIONS FOR THIS DEVICE
- WARNING: Danger of burns! During operation the temperature of the exposed surface may be very hot. Therefore, only touch the appliance at the thermostat controls.
- WARNING: Damage of surface! If the surface is damaged or has cracks the device must be switched off to avoid the hazard of electrical shocks.
WARNING:
- Metal objects as, e.g., knives, forks, spoons and pot lids should not be placed on the cooking zone as they may get hot.
- Hot surface! The cooker initially heats only the base of the cooking utensils used, not the cooking zone itself. However, because of the heat radiated during cooking, dangerously high temperatures may also occur at the cooking zone after the cooking cycle. Hazard of burns!
- Potential damage to your health! People wearing pacemakers must not use this cooker. You should keep a minimum distance of 60 cm to the appliance when it is in use.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
ERROR MESSAGES
During operation the following error messages can be displayed:
| Errors| Check|
---|---|---|---
| Warning Signal E0| Check whether the suitable pot is used.
Check whether the pot is put on the cooking plate.
| Warning Signal E1| Check whether the IGBT probe break off.
| Warning Signal E2| Check whether the IGBT temperature reach very high.
| Warning Signal E3| Check whether the voltage too high.>280V
| Warning Signal E4| Check whether the voltage too low. <85V
| Warning Signal E5| Check whether the main temperature sensor break off.
| Warning Signal E6| Check whether the cooker dry burning.
| Warning Signal E9| Check whether the errors on circuit.
SPECIFICATION
Power supply
Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE 165,
RAINBOW NORTH STREET, NINGBO, CHINA
Made in China
220-240 V ~ 50/60Hz
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating,
rubber seals, etc.) Production date is available in the serial number located
on the identification sticker on the gift box and/or on sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture,
warranty and technical characteristics of the model without notice. Please
check when purchasing device. Current information about service centers is
available on the website https://multimarta.com/