Tranya ES10 Smart Watch User Guide

Tranya ES10 Smart Watch

PRODUCT INTRODUCTION

Choose a language; Select the corresponding language after the first boot Two- dimensional code; Scan the code to download the GloryFit APP, and after downloading the APP, scan the code to bind the watch Long press the QR code to enter the dial page Button: Hold down for 3S to turn on/off the watch

Note: When you use the product for the first time, activate the watch by charging

WEAR

For daily wear, wear the watch on your wrist, about a finger width from your wrist bone, and adjust the strap to a comfortable size.

Tips: If the watch is worn too loosely, it may affect the data collected by the heart rate sensor

CONNECTION

1. Search and download “GloryFit” APP from Apple Store or Google Play.
   Scan the QR code (Settings – Application QR code) on the watch with your mobile phone to install the “GloryFitt” APP, or scan the QR code below to download and install the “GloryFit” APP in the app store.

2.  After installation, open the “GloryFit” APP; Log in to the device page, select the watch to establish a connection (Add a device, select “Model” or scan the watch QR code).

Tips:

1. During the pairing process, please check whether the Bluetooth of the mobile phone is enabled to ensure that the watch can normally connect to the mobile phone.
2. If the device is not found during the process of adding the device, or the device cannot be connected during use, reset the device on the watch operation interface (” Setting-reset “), and then add the device again.
3. If the watch still cannot be found, please exit and re-open the APP
4. The connection status of the watch is shown as follows:

CONTROLS

1. Open the Control panel: Swipe down the watch home page from top to bottom
2. View information: Swipe from the bottom up on the home page
3. Enter the main menu: Swipe right on the home page of the watch (Note: Swipe right on other pages to return to the previous page)
4. Open the status screen: On the home screen, swipe left
5. Quick change of watch face: Hold down the home screen for 3 seconds, then you can swipe left or right to select the watch face.
6. Power on: Press and hold for 3 seconds (Power off: When the screen lights up, press and hold the button for 3 seconds, and then confirm the power off)
7. Press the button to return to the home screen.

FEATURE

Multiple sports modes (outdoor running, cycling, jumping rope, badminton, table tennis, tennis, mountaineering, hiking, basketball, soccer, baseball, etc.) and other sports modes can also view the sports data (heart rate, speed, duration, calories, step distance).

• Call function
  First of all, make sure that the call switch is turned on. After pairing, you can operate, contact, view call records, and make calls.

• Contact person
  You can select the corresponding contact card from the mobile APP, select and confirm, and then import it into the watch.

• Phone records
  Records of incoming calls and incoming calls are save.

• Dialing page
  You can enter the number you want to call, hold down the phone to delete it, or use the watch to answer and end the call.

• Heart rate monitoring
  To monitor your real-time heart rate over a 24-hour period, you can view historical heart rate data.

• Blood oxygen monitoring
  Turn on the oxygen monitor and wait until the measurement is complete. During the measurement, the red light lights up for the test.

• Women’s health
  Period reminders for female users (need to be set in the APP).

• Status
  Record details of daily steps, distance and calories.

• Sleep monitoring
  Record details of sleep time and sleep status (view records in the APP)

• Music Controller
  The watch can control the music playing in the phone, play/pause/down/before, increase/decrease the volume. (Note: Compatible with the music player, the phone comes with, not compatible with the use of third- party music players.)

• SOS
  Set up emergency contacts in the app and return emergency calls with one click when needed

• Voice assistant
  You can use the watch to wake up the phone’s voice assistant and control the phone with words.

• Message notification
  The watch has a message reminder function, which can sync and push calls and phone messages. (Note: The message displayed by the APP is compatible with social software)

• And more
  Stopwatch, timer, search phone, flashlight, remote camera, calculator

• Settings
  Dial, brightness, bright screen time, raise wrist screen, shutdown, about, restore factory Settings, APP download

CHARGING

1. Place the watch on the charger so that the charging contact opens and the back of the watch fits perfectly with the metal contact on the charger. (Charging time: more than 2 hours)
2. Connect the charging cable to the standard charger purchased by the authorized supplier with an output voltage of 5V Output current 1A. If the watch cannot be turned on without using it for a long time, please wipe the charging contact of the charging cable to erase it Residual sweat or moisture.
   Note: If you do not use it often, please charge it once per charge Month.

BASIC PARAMETERS

CHARGING FREQUENTLY ASKED QUESTIONS

1. Failed to connect to Bluetooth

2. Check whether the operating system is Android 5.0 or iOS 9.0 or later.

3. Check to see if the watch is connected to another phone, and if so, unplug it first.

4. Check whether the Bluetooth of the mobile phone is enabled and works normally. It is recommended to close all programs and re-enable them Connect before Bluetooth;

5. Messages are not notified

6. Make sure your phone Bluetooth is turned on, and Check that your phone is still connected to your watch. Check whether you authorize the APP to run in the background Mobile phone.

7. Check whether the notification and reminder switches of the device are normal Open the corresponding application in the APP;

8. Check whether the notification bar of your phone can pop up Application notification or SMS. If no, go to the system The permissions of the APP message are displayed Notify the bar.

9. If the above operations do not solve the problem, please reset the watch And restart the phone, then connect the test again.

10. Check whether the watch is in Do not disturb mode. When not When the interference mode is turned on, a message alert and wrist sensor will trigger Not working.

11. How do I synchronize data?

12. Automatic synchronization: When the watch is connected successfully Mobile phone through the APP, data will be automatically synchronized;

13. Manual synchronization: After the watch is successfully connected The mobile phone can manually pull data synchronization through the APP Drop down the data list of APP home page and data interface; Safety instruction

14. If data cannot be synchronized, turn it off and enable it Turn on the phone Bluetooth again or restart the phone;
    Note: The FAQs of the APP’s Personal Center can help You solved some problems with using this device.

15. How to view the watch version, upgrade, unit, time format, and user Boot, factory reset, more motion and unbinding **devices? Select and click the options as shown below

**

SAFETY INSTRUCTION

Consult your doctor before starting a new exercise program.
Though it Capable of tracking your heart rate, this smartwatch is just meant to help people live their lives

A healthier life, under no circumstances, should be used for any medical purpose.

Remember to consult your doctor before starting any exercise or diet program.

• Do not place this product and its accessories at extreme temperatures, otherwise it will cause damage and may lead to product failure, fire or explosion.
• Prevent the product from strong impact or turbulence, so as not to damage the product and its accessories, so as to avoid product failure.
• Do not disassemble or modify this product and its accessories. Contact US provides after-sales service when a product fails. Old electrical appliances must not be disposed of with garbage Residual waste, but must be disposed of separately. Disposal place is Public collection points for private use are free. the Owners of old appliances are responsible for bringing them to these places.

Collection point or similar collection point. It’s a little personal Strive to contribute to your recovery of valuable raw materials Disposal of toxic substances.

If you experience discomfort or skin irritation while wearing a smartwatch, then We recommend that you try to clean your device. Sometimes it’s residue or a foreign object Buildup of substances around your device that could damage your skin. This is also Maybe you’re not wearing your watch properly.

We propose to ensure Clean and adjust your watch regularly to make it more comfortable to wear.
Avoid skin irritation when wearing the watch Put it on and wait two to three days to see if your symptoms ease. If symptom If it persists or worsens, consult your doctor. If you have eczema, allergies, or asthma, you may be more likely to develop asthma Wearables cause skin irritation or allergies.

• If the replacement of the battery type is incorrect, improper handling, there is a risk of explosion Throwing the battery in a fire or a hot oven, or mechanically crushing or cutting the battery, that Can cause an explosion; .
• Place the battery in a very high temperature environment Can cause explosion or flammable liquid or gas leakage; Batteries under extremely low air pressure may cause an explosion or explosion Leakage of flammable liquids or gases.

FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

CUSTOMER SUPPORT

15-MONTHS Extended Warranty Activate Within 14 Days

For more information, please visit: tranya.com
For any assistance, email us support@tranya.com

References

• Tranya Offical Site - Superior Sound for All
• Register Product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>