Ubiquiti USW-PRO-MAX-24 Port GbE Switch Installation Guide
- July 18, 2024
- UBIQUITI
Table of Contents
Ubiquiti USW-PRO-MAX-24 Port GbE Switch
WHAT IN THE BOX
INSTALLATION INSTRUCTION
Specifications
- Model : Pro Max 24 PoE
- Manufacturer : UI
- Power over Ethernet (PoE) support: Yes
- Product Link: Product Manual
Product Usage Instructions
Unboxing and Inspection
When you receive your Pro Max 24 PoE unit, carefully unbox it and inspect
for any physical damages that may have occurred during shipping. Ensure all
accessories are included.
Installation
Follow the detailed installation guide provided in the product manual
linked above. Make sure to connect the necessary cables and power source as
instructed.
Configuration
Access the device’s configuration interface using a web browser and follow
the on-screen instructions to set up network parameters, PoE settings, and any
other configurations required for your specific setup.
Troubleshooting
If you encounter any issues during setup or operation, refer to the
troubleshooting section of the user manual for guidance. You can also contact
customer support for assistance.
Frequently Asked Questions (FAQ)
Q: How do I reset the device to factory settings?
A: To reset the Pro Max 24 PoE to factory settings, locate the reset button
on the device and press and hold it for at least 10 seconds until the device
reboots.
Q: Can I use non-PoE devices with the Pro Max 24 PoE?
A: Yes, you can connect non-PoE devices to the Pro Max 24 PoE unit, but
they will not receive power over Ethernet. You will need to power them
separately.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>