Hiearcool B079HV3TC9 Waterproof Phone Pouch User Manual
- July 17, 2024
- Hiearcool
Table of Contents
Hiearcool B079HV3TC9 Waterproof Phone Pouch
Product Information
Specifications:
- Waterproof Pouch for Cell Phones
- Includes two swivel switches
- Not suitable for touchscreen use underwater
- Dimensions: 6 inches x 3 inches
- Material: Waterproof fabric
Product Usage Instructions
Step 1: Turning On the Pouch
Turn on the two swivel switches located on the pouch.
Step 2: Inserting the Device
Insert your cell phone into the pouch. Ensure it fits securely.
Step 3: Testing Waterproofing
Turn off the switches and submerge the pouch underwater for a 30-minute test. Ensure no water enters the pouch.
Step 4: After Use Care
Clean up any water stains on the pouch and air-dry it after the second use. Avoid exposing the pouch to direct sunlight.
Additional Notes for Cell Phone Usage:
If your cell phone’s touchscreen is not responsive underwater, use the volume buttons to take photos. Touch ID will not work underwater. To wake up the cellphone, use the power button or enable the Raise to Wake function in settings.
Frequently Asked Questions
- Q: Is the napkin included with the pouch?
- A: No, the napkin is not included. You need to provide your own.
- Q: Can I use the touchscreen of my cell phone underwater with this pouch?
- A: No, touchscreen functionality underwater is not supported. Please use alternative methods like volume buttons for taking photos.
- Q: How do I wake up my cell phone when it’s inside the waterproof pouch?
- A: You can wake up your cell phone using the power button or enable the Raise to Wake function in settings.
Product Usage Instructions
- Turn On the two swivel switches
- Insert the napkin
- Turn Off the switches.
- Submerging the pouch underwater for a 30-minute test.
NOTE:
- The napkin is not included.
- Always test before use
Maintenance
- Please clean up the water stain, and air-dry the pouch after the second use.
- Do Not expose to the sun.
Best Tips
- When a Cell phone’s touchscreen suffers from hydraulic pressure underwater, please take photos with the volume buttons.
- Touch ID can not function underwater. Wake up a cellphone with the power button or use the “Raise to Wake” function:
- Setting -> Display&Brightness -> Raise to wake -> ON.