Hiearcool UCN 3286 USB Type-C Hub Pro User Manual
- June 6, 2024
- Hiearcool
Table of Contents
USB Type-C Hub Pro
USER MANUAL
Product Model: UCN 3286
Made in China
Features
- Plug&Play
- HDM: Up to 3840*2160@30Hz
- USB C PD: Power Input Up to 100W
- USB 3.0 x2/ Up to 5Gbps
- SD/TF: Up to 2TB capacity
- Preventing overload, over-voltage, over-current, short circuit, overcharge, voltage regulation, and temperature protection under 45 °C.
Specifications
Input port: USB-C/M x1
USB C PD
Output port: HDMI/F x1
USB 3.0/F x2
SD/TF Card Slot
Operating Temperature: 0°C to +45°C
Operating Humidity: 10% to 90%
RH Storage Temperature: -10 °C to +70°C
Storage Humidity: 10% to 90% RH
Instruction to Product Ports
Attention
- The current output of the new MacBook is around 1.5A. When the load exceeds 1 .5A,the computer will start the Self-Protection function. Then prompt pop up(current overload), disable the prompt, and restart your laptop. Connect the PD before plugin any other port.
FAQ
Q1: Why is there no video output?
Al: a.Please make sure that the laptop is equipped with Thunderbolt 3/USB-C
3.1 Gen 2/USB-C 3.1 Gen 1 port (Supports PD), which supports usb c display
transfer.
b. If it is Thunderbolt 3 laptop, please try to update system BIOS,
Thunderbolt 3 driver, Thunderbolt 3 NVM firmware,and graphics (GPU) driver
from the system manufacturer.
c. Ensure sufficient power supply to connect external monitors. d.Check the
HDMI cable or monitor if can work properly.
Q2: Why can’t I use the mouse/keyboard/hard drive via the product?
A2: Please plug in the Laptop’s power adapter to the USB-C PD port or connect
the AC power adapter to the laptop before using it. If the issue insists,
please feel free to contact us.
Q3: Why does the USB C PD port doesn’t work?
A3: The USB C PD supports power INPUT up to 100W. Please plug in the Laptop’s
power adapter to the USB-C pd port and make sure the laptop supports PD
function.
Any Concern?
Product Support:
Email: hiearcool@outlook.com