Hiearcool UCN3320 USB Type-c Hub Pro User Manual
- June 5, 2024
- Hiearcool
Table of Contents
Hiearcool UCN3320 USB Type-c Hub Pro
Compatible model:
- MacBook Pro (13-inch) 2016 & later
- MacBook Pro (15-inch) 2016 & later
- MacBook Pro (16-inch) 2019 & later
- MacBook Air (Retina 13-inch) 2018 & later
Product Parameters
Operation Instruction
- Connect the USB C Hub to the MacBook Pro/Air via Type C PD port.
- Connect the HDMI to the projectorTV/displayer via HDMI cable (Use a 4K HDMI cable to achieve a 4K display)
- USB 3.0/2.0 port for the peripheral device.
- PD Interface only for power passing-through only.
Ethernet Setting
Step 1. Connect Your Computer to the Network
Plug one end of the Ethernet cable into the network card or port in your
Macbook Air/Pro and the other into the Etherner jack on the wall. If your
Ethernet jack has one orange port, plug your cable directly into that port. If
the Ethernet jack has two orange ports, try the one on the right side first,
as this is usually the single activated port.
Step 2. Configure TCPIP
In System Preferences-> Network select Built-In Ethernet from the Show: drop-
down menu. With the TCP/IP tab selected, select Using DHCP from the drop-down
menu. Click Apply Now and then quit System Preferences.
If your MacBook is the first time to use the ethernet port:
Macbook needs to be set up as follows: System Preferences- Network Click +” to
create a new service – Select USB 10/100/1000 LAN- Create Application (Click
on the application to show USB USB 10/100/1000 LAN Green, connected
successfully), The macbook is accessed via wired internet at this time
.
Sound Setting
MacBook: System Preferences Sound Select the sound output device (built-in speakers: computer sound, Display: monitor / TV sound, USB: headphone sound )
Windows computer: computer monitor sound symbol (right click)» sound Playback (Select steps are as follows: Speaker 2-USB pnp Audio Device is the headphone sound, the speaker Realtek High Definition Audio is the computer audio sound, the Intel display audio is the monitor or the TV sound, when you need to select the desired option, Click: Device Default » Default Device;
HDMI Output Modes
To achieve the 4K resolution, the PC/Monitors/Cable must support 4K display
output.
Mac Mirror Mode
Mac Extend Mode 1
Extend Mode 2
Instruction to Product Ports
Attention
The current output of the new MacBook Pro is around 1.5A. When the current exceeds 1.5A The computer will start the self-protection function with prompt: The USB power has high consumed (due to the display data transfer); please detach the product. Unplug the USB C Hub, disable the iCon, restart the laptop. Connect the wall charger (laptop’s charger) to the PD port then plug it into the laptop before using the other function. Do not disable the PD port when transferring any data.
Any Concern
Product Support Email: hiearcool@outlook.com