HOFTRONIC 4400606 Moona Highbay User Manual

June 3, 2024
HOFTRONIC

HOFTRONIC-4400606-Moona-Highbay-logo-1

HOFTRONIC 4400606 Moona Highbay

HOFTRONIC-4400606-Moona-Highbay-product

IMPORTANT SAFETY DETAILS

  1. Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
  2. This product must be installed by a qualified electrician.
  3. This product may NOT be installed by minors or people with a mental disability.
  4. Make sure the unit it sufficiently ventilated
  5. Never cover the unit during operation
  6. Keep out of reach of children or animals
  7. Do not look directly at the light source during operation, this can lead to serious eye damage.
  8. Any other use than described in the manual may damage the product or cause danger to the user, e.g. due to a short circuit, fire or electric shock

SPECIFICATIONS TABLE

SKU

|

4400569

|

4400576

|

4400583

|

4400590

|

4400606

|

4400613

---|---|---|---|---|---|---

Total output (W):

| 100W| 100W| 150W| 150W| 200W| 200W
Luminous flux (Lm):| 14.000lm| 14.000lm| 21.000lm| 21.000lm| 28.000lm| 28.000lm
Color temperature (K):| 4000K| 6000K| 4000K| 6000K| 4000K| 6000K

Dimmable:

| Optional
Degree of protection (IP):| IP65
Input voltage (V AC):| 220-240V AC
Warm-up time (s):| <1 sec

Switching cycles:

| 100.000x

Lifespan (h):

| > 50.000h
Color rendering index (CRI):| Ra >70

Beam angle (°):

| 120°

INSTALLATION INSTRUCTIONS

INSTALLATION METHOD 1HOFTRONIC-4400606-Moona-
Highbay-1

  1. Drill a hole into the ceiling and install a hook.
  2. Hang the fixture on the hook
  3. Connect the cables. Bown=L, Blue=N, Yellow/Green = ground. Use a waterproof connection.

INSTALLATION METHOD 2HOFTRONIC-4400606-Moona-
Highbay-2

  1. Drill holes into the ceiling and install the expansion screws
  2.  Fix the bracket

DIMMER INSTALLATIONHOFTRONIC-4400606-Moona-Highbay-
logo

Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety instructions of the device. Furthermore, we are not liable for consequential damage, damage to objects or persons resulting from failure to observe the safety instructions and improper use/handling of the device due to wear and tear. Product design and specifications are subject to change without notice. All logos and trade names are registered trademarks of their respective owners and hereby acknowledged as such.

Storage of the manual
Please read the operating instructions carefully and completely before use. The operating instructions are part of the product, they contain important information on the commissioning and handling of the device. Keep all enclosed operating instructions for future reference. If the device is sold or passed on to third parties, you are obliged to pass on the operating instructions as these are lawfully part of the product.

Use of product/installation
Before use, check the completeness of the parts supplied and the intactness of the product. If damaged, it must not be put into operation. This product may only be installed by a qualified technician.

Installation:

1. Disconnect from the mains
2. Secure against being switched on again
3. Verify that there is no voltage on your cable
4. Follow the enclosed instructions.
Warning, when the LEDs keep glowing, please check if you connected the product correctly (L/L and N/N)

Operating the product

The safety instructions and warnings must be observed to ensure both the perfect condition of the product and safe operation.

Product maintenance
The product can be cleaned with clear water and a soft cloth. Do not use detergents containing surface active agents or scouring agents.

Information for disposal
Old appliances marked with the pictured symbol must not be disposed of with the trash. You must return them to a waste collection center (inquire at your local community) or the retailer where they were purchased. They will ensure environmentally disposal.

CE-Declaration
This product complies with the following directives:

  • LVD: 2014/35EU
  • EMC: 2014/30/EU
  • RoHS: 2011/65/EU

Explanation of symbols, concepts and particularities of the product CE is the abbreviation for Conformité européenne – And means conforms to the European guidelines. With the CE-mark, the manufacturer confirms that this product complies with the current European guidelines. be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS
Product can be used indoors and outdoors.

USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

DOCUMENTATION
This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale. Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

CE DECLARATION
The product complies with the following directives:

  • LVD: 2014/35EU
  • EMC: 2014/30/EU
  • RoHS: 2011/65/EU

The complete Declaration of Conformity Document (DOC) is available upon request.

Imported by HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in P.R.C. www.hoftronic.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals