VEEPEAK VP01 Mini WiFi OBD II Scanner Adapter Instruction Manual

VEEPEAK VP01 Mini WiFi OBD II Scanner Adapter

Product Information

Specifications

• Product Name: OBDCheck VP01 V1.2405
• Compatibility: Cars and light trucks made since OBD II/EOBD Compliant years
• Connection: Wi-Fi (not Bluetooth)
• Default IP Address: 192.168.0.10
• Default Port Number: 35000
• Power Consumption: Higher than Bluetooth versions

Product Usage Instructions

Vehicle Compatibility
This device is compatible with cars and light trucks made since the OBD II/EOBD Compliant years.

Apps Recommendations & Connection Tips
For best performance, use one of the recommended apps:

• Car Scanner ELM OBD2
• Torque Lite/Pro
• Infocar
• OBD Fusion

To connect, select Wi-Fi as the connection type and use the default IP & port: 192.168.0.10, 35000.

Vehicle Compatibility

Compatible with cars and light trucks made since the following year (OBD II / EOBD Compliant):

• USA – 1996, Canada – 1998
• European Union – 2001 (gas), 2004 (diesel)
• Australia – 2006 (gas), 2007 (diesel)
• Mexico – 2006, etc.

Note:

1. The above compatibility only applies to generic OBD II features (emission-related check engine diagnostics & sensor data) and does not include any advanced features like enhanced diagnostics (such as transmission, ABS, airbag, body control, TPMS), service reset, etc.
2. For hybrid plug-in or all-electric vehicles, special OBD2 Apps are required such as Car Scanner ELM OBD2 via special connection profiles (see FAQ 5).
3. OBD I vehicles or commercial vehicles (HD-OBD or J1939) are not compatible.
4. Enhanced diagnostics are only available for selected vehicles when used with the following Apps (please check the detailed vehicle compatibility on the App website):
   • OBD Fusion: for selected Ford, Lincoln, Mercury, Mazda, Toyota, Lexus, Scion, Nissan, Infiniti, Dodge, RAM, Chrysler, Jeep, and some FIAT and Alfa Romeo vehicles (via in-app purchase of enhanced diagnostic add-on). OBD JScan: for selected Jeep, Chrysler, DODGE, and RAM.
   • AlfaOBD: for selected FCA vehicles.
   • FORScan Lite: for selected Ford, Mazda, and Lincoln vehicles.

Apps Recommendations & Connection Tips

Car Scanner ELM OBD2 (iOS & Android; mostly free)
A vehicle performance/trip computer/diagnostics tool that uses an OBD II adapter to connect to your OBD2 engine management/ECU. It includes a lot of connection profiles that give you some extra features for many vehicles including EVs.

Please go to Settings – Adapter OBDII ELM327, select Wi-Fi as the connection type, and do not change the default IP & port (192.168.0.10, 35000).

Torque Lite/ Pro (Android only, pro version is paid)
Popular vehicle performance, sensors, and diagnostics tools.

Please go to Settings – OBD2 Adapter Settings, select WiFi as the Connection type and do not change the default IP & port (192.168.0.10, 35000). Then close the App and restart it.

Infocar (iOS & Android)
A smart vehicle management app that provides vehicle diagnosis and information on driving style.

Tap on “Connection” or go to Settings, select Wi-Fi as the Connection type, and use the default IP & port: 192.168.0.10, 35000.

OBD Fusion (for iOS version only, paid, plus in-app purchase for enhanced diagnostics)
Read DTCs & clear check engine lights, create customized dashboards, estimate fuel economy, and much more, plus enhanced diagnostics for Ford, Lincoln, Mercury, Mazda, Toyota, Lexus, Scion, Nissan, Infiniti, Dodge, RAM, Chrysler, Jeep, and some FIAT and Alfa Romeo vehicles.

iOS: please go to Settings – Preferences – Communications, select Wi-Fi as the communication type, and ELM327 Generic as the device.

Quick Setup Guide

1. Download and install the APP of your choice according to the phone OS (see recommended apps in Part II).
2. Plug the device into the OBD II port on your vehicle. Make sure it fits well.
3. Turn the ignition key to the ON position. For Push Button Start vehicles, press the button once to twice without putting your foot on the brake pedal (check your car manual).
4. Enable WiFi on your phone or tablet, find a WiFi network named “WiFi_OBDII” and join it.
5. Run the APP, make any necessary app settings (see detailed settings in Part II) and connect.

Note:

• Apps can be downloaded from Google Play Store or Apple App Store. The app price is decided by the developer.
• There is no visible power LED indicator which does not mean the product is not working. Please check if “WiFi_OBDII” shows up on your phone’s WiFi list.
• It does not have Bluetooth connectivity.
• Some phones may warn you that your phone does not connect to the internet. You can ignore it because the device’s WiFi does not provide internet access.
• Please grant the App “local network” permission.

FAQs

Is there an App included with the device? How to choose the app for my vehicle?

No, an OBD2 app is required but not included. There are many great third-party OBD2 apps available to download (some may require purchase) from Google Play Store and Apple App Store. What features you can get mainly depends on the chosen App. For generic OBD2 functions, we recommend Car Scanner ELM OBD2, Inforcar, or OBD Fusion (paid). They cost from free to about $10.

Which devices does it support?

The OBDCheck VP01 is compatible with Apple iOS and Android devices via Wi-Fi. You need to join the WiFi network created by this device. Note: it does not use Bluetooth; the device’s WiFi does not provide internet access.

What’s the IP address and port number for this device?

192.168.0.10 & 35000. Most OBD2 Apps have these default values so usually you do not need to change them.

Is there any LED indicator on when it’s plugged in?

The LEDs are blocked by the black enclosure so they are invisible. As long as you see the WiFi network WiFi_OBDII on your phone or tablet, it means the device is powered on.

Can I leave the device plugged in all the time?

No, the Wi-Fi version consumes more power than Bluetooth, and it may drain your car battery if left plugged in all the time (the OBD port is always powered).

Does it work with hybrid plug-in (PHEV) or all-electric vehicles (BEV)?

Most EVs (including PHEVs) do not follow standard OBD II specs, so you may need a capable App to connect, for example, Car Scanner ELM OBD2 (select the corresponding connection profile), ABRP, LeafSpy, EVNotify, EV Watchdog, MyGreenVolt, CanZE, etc.

Can it reset my ABS, airbag, and other non-Check Engine lights?

Most OBD2 Apps only provide basic emission-related check engine light diagnostics. You will need a capable App that can do enhanced diagnostics on your specific vehicle, for example, OBD Fusion, OBD JScan, AlfaOBD, etc. Contact Veepeak or the app developer to check if it’s available on your vehicle. An oil change or maintenance-required lights cannot be read or reset since there is no error code for them.

Which sensor data can I get?

Readable parameters depend on what's installed on the OBDII system by the manufacturer. Generally, newer vehicles will give more readings and faster refresh speed.

Does it read transmission temperature?

The transmission (fluid) temperature is a manufacturer-specific PID so it’s not read by most generic OBD2 Apps. Please contact Veepeak customer support for App recommendations (similar to FAQ 6) or search for the custom PID information on the web & add it to the App. This applies to other manufacturer-specific PIDs.

Which apps is the device incompatible with?

The VP01 is incompatible with BimmerCode, BimmerLink, OBDeleven, Carly, MHD, ProTool, etc.

Where can I find out how to connect & use videos?

Please visit the Amazon product page and click the videos below the product images.

Common Issues & Troubleshooting

1. The device does not power up (no power light).
   There is no visible power LED light when it’s plugged in. Please first check if you can find the WiFi name “WiFi_OBDII” on your phone or tablet. It will NOT send out a Bluetooth signal. If no WiFi signal shows up, check the cigar fuse of your vehicle. You can also try with another vehicle to verify.

2. Could not join “WiFi_OBDII”.
   Unplug the device, and re-plug it in, to try again. If still no help, contact customer support.

3. After connecting with the device’s WiFi, the phone does not have internet access.

   • For iOS devices, you can tap on the “i” icon next to “WiFi_OBDII” and go to the WiFi configuration page, then select Manual for IPV4 and enter the information below:
   • IP 192.168.0.11, Subnet Mask 255.255.255.0 and Router 192.168.0.10. Your cellular data will be available for internet access.
   • Unfortunately, we do not have a solution for Android. Please download the App before connecting to the device.

4. App not connecting to OBD II Device (ELM connection fails).
   Make sure the App is compatible, and you have made the correct App connection settings (set to WiFi) and granted the App permissions (local network); Remove and re-install the app (especially when you have an OS update); Try with a different App such as Car Scanner ELM OBD2, Infocar, which are free to test.

5. Cannot connect to a vehicle (ECU connection fails).

   • Make sure your vehicle is OBD2 compliant and the OBD2 connector is in good condition;
   • Check if your vehicle is supported by the App;
   • Make sure the ignition is turned ON or start the vehicle to try;
   • Make sure it fits well in the OBD2 port. Try to push it a little harder into the OBD2 port if the contact is loose; Try it on another vehicle to check if it’s the problem with the device.

6. The connection is not stable and gets disrupted during use.
   Turn off WiFi Assist (Settings – Cellular, scrolling to the bottom and disable WiFi Assist); Keep the device as close as possible to your phone, turn off cellular data & Bluetooth, and close other Apps; Do not switch to other WiFi networks during use (even though it says there is no internet connection); Update the app to the most up-to-date version; try with a different app (Car Scanner ELM OBD2 or Infocar) to see if it happens again.

7. No data is read after it connects to the vehicle.
   Try with a different app and see if it makes any difference.

8. Could not read the trouble codes.
   Try with a different App. If there are non-check engine lights on the dashboard, you may need a more capable App to read these codes.

9. Could not erase the trouble codes.
   The manufacturer does not allow this erasing operation via generic OBD2 commands; the problem must be fixed first before the codes can be erased.

If you cannot find the answer or still have trouble getting it to work properly after troubleshooting, please reach out to Veepeak customer support at support@veepeak.com for assistance or replacement. Please include a screenshot of the error message so we can better look into the issue. Our customer service is friendly and the replacement process is hassle-free.

Warranty & Support

We will gladly accept defective products within one year of the original invoice date and get them replaced, as long as they are purchased from our Amazon stores or authorized distributors. You can contact us through one of the following ways:

• Our website: https://www.veepeak.com/support.
• Amazon message (contact seller in order details).
• Phone: +1 8333031434 (9:00 AM – 5:00 PM CST Monday – Friday)
• Email: support@veepeak.com.

Disclaimer

Currently, all features and functions are offered and achieved through third- party Apps.

Product names, logos, brands, vehicle makes/models, and other trademarks featured or referred to within this user instructions are the property of their respective trademark holders. Use of them does not imply any affiliation with or endorsement by them.

References

• Support – Veepeak

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>