VEEPEAK OBDCheck VP01 Mini WiFi OBD-II Scanner Adapter User Manual

VEEPEAK OBDCheck VP01 Mini WiFi OBD-II Scanner Adapter

Specifications

• Connection Method: WiFi
• Supported Protocols: SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO14230-4 (KWP2000), ISO15765-4 CAN
• IP Address: 192.168.0.10
• Port Number: 35000

Product Usage Instructions

Connecting the Device

1. Plug the Veepeak OBDCheck VP01 into your vehicle’s OBD port.
2. Turn on your phone or tablet’s WiFi and connect to the WiFi network named “WiFi_OBDII.”

Using OBD2 Apps
Download and install a compatible OBD2 app from the Google Play Store or Apple App Store. Recommended apps include Torque Lite/Pro, Car Scanner ELM OBD2, Inforcar, OBD Fusion, etc.

Reading Sensor Data
The readable parameters depend on your vehicle’s OBDII system. Refer to OBD II PIDs on Wiki for more information. Newer vehicles typically provide more readings and faster refresh speed.

Troubleshooting Guide

1. Device not Powering Up: Check the vehicle’s cigar fuse and try with another vehicle to verify.
2. WiFi Connection Issue: Restart your phone, turn off and on WiFi.
3. App Connection Problem: Ensure app compatibility, check hardware requirements, set connection method to WiFi, IP 192.168.0.10, and port 35000 in the app settings. Grant local network permission, reinstall the app or try a different one.

FAQs

Is there an App included with the device?
No, but you can download third-party OBD2 apps from Google Play Store or Apple App Store.

Veepeak OBDCheck VP01 FAQs & Troubleshooting Guide

FAQs

1. Is there an App included with the device?
   No, but there are many great third-party OBD2 apps available to download (some may require purchase) from Google Play Store or Apple App Store. For generic OBD2 features, we recommend Torque Lite/Pro, Car Scanner ELM OBD2, Inforcar, OBD Fusion (paid), etc.

2. Which connection method does it use?
   The VP01 uses WiFi as connection method, and it does NOT have Bluetooth option. It creates it own WiFi (WiFi_OBDII) for your phone or tablet to join in. If you want a Bluetooth OBD2 scanner, please choose the OBDCheck BLE (iOS & Android) or the VP11 (Android only).

3. Is there any led indicator on when it’s plugged in?
   The LEDs are blocked by the black enclosure so they are invisible. As long as you see WiFi network “WiFi_OBDII” on your phone, it means the device is powered on. It does not have a blue light.

4. What’s the IP address and port number for this device?
   192.168.0.10 & 35000. Most OBD2 Apps have these default values so usually you do not need to change them.

5. Which OBD II protocols does it support?
   SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO14230-4 (KWP2000), and ISO15765-4 CAN.

6. Can it use it to read or reset my ABS, airbag, and other non-Check Engine lights?
   Most OBD2 Apps only provide basic check engine light diagnostics. Oil change or maintenance required lights cannot be read or reset since there is no error code for them.

7. Which sensor data can I get?
   Readable parameters depend on what’s installed on the OBDII system by the manufacturer. Please refer to OBD II PIDs on Wiki. Generally, newer vehicles will give more readings and faster refresh speed.

8. Does it read transmission temperature?
   The transmission (fluid) temperature is a manufacturer specific PID so it’s not read by most generic OBD2 Apps. Some Apps may have extended PIDs for some vehicles, and you can contact Veepeak customer support to check You can also search for the custom PID information on the web & add it in the App.

9. Will I have internet access when connecting to the device’s WiFi?
   Unfortunately the answer is no for Android. For iOS devices, you can tap on the “i” icon next to “WiFi_OBDII” and go to the WiFi configuration page, then select Manual for IPV4 and enter information below:
   IP 192.168.0.11, Subnet Mask 255.255.255.0 and Router 192.168.0.10. Your mobile data will be available for internet access.

10. Can I leave the device plugged in all the time?
    The WiFi connection consumes more power than Bluetooth, so we suggest that you unplug the device when it’s not use.

Troubleshooting Guide

1. Device not power up (no WiFi signal detected).
   First check if the cigar fuse of your vehicle is in good condition to provide power to the OBD port. You can also try with another vehicle to verify.

2. Could not join in “WiFi_OBDII”.
   Please restart your phone and turn off WiFi and turn it back on.

3. App not connecting to OBD II Device (ELM connection fails).
   Make sure the App is compatible and check the App hardware requirements;
   Make sure your phone is connected to “WiFi_OBD2”. Check the App setting and make sure the connection method is set to WiFi, IP 192.168.0.10 and port 35000;
   App is granted local network permission;

   • Remove and re-install the app;
   • Try with a different App.

4. Cannot connect to vehicle (ECU connection fails).

   • Make sure your vehicle is OBD2 compliant (1996+MY in the US, 2001+ petrol/2004+ diesel in EU & UK, etc.; J1939 commercial vehicles not compatible);
   • The ignition key is ON or start the vehicle to try;
   • Make sure it fits well in the OBD2 port. Try to push it a little harder into the OBD2 port;
   • Then try it on another vehicle if possible.

5. Connection is inconsistent.

   • Keep the device as close as possible to your phone, and close other Apps; update the app to the most up-to-date version; check if the connection to the OBD network is interrupted; try with another App and phone to see if it’s the problem with the device.

6. The device does not fit into the recessed area of the OBD port or is hard to plug in and out.
   Use a Veepeak OBD2 extension cable (available on amazon).

7. No data is read after it connects to the vehicle.
   Try with a different app and see if it makes any difference. If you could not find a specific sensor data, please check if it’s a manufacturer PID or contact us.

8. Could not read the trouble codes.
   Try with a different App. If there are non-check engine lights on the dashboard, you may need a more capable App to read these codes. Contact us with your vehicle make/model/year.

9. Could not erase the trouble codes.
   The manufacturer does not allow this erasing operation via generic OBD2 commands.

If you could not find the answer or still have troubles getting it to work after troubleshooting, please reach out to Veepeak customer support at support@veepeak.com for assistance or replacement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>