mach power HC-SWAP50 Air Purifier User Manual

: June 5, 2024
: mach power

Table of Contents

SAFETY INFORMATION
PRODUCT DESCRIPTION
INSTALLATION GUIDE
OPERATION
CLEANING AND MAINTENANCE
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User manual
Air Purifier
HC-SWAP50

Thank you for purchasing one of our products.
Read and follow this manual carefully before use. The product is intended for domestic use under normal conditions of use.

Warnings

Do not use the device near water. Do not touch the device with wet hands.
Do not use water, liquids, detergents, or flammable substances to clean the device.
Do not cover the air intake.
Do not use if the device is damaged.
Do not disassemble, repair or reassemble the device.
If you do not use the device for a long time, disconnect the power supply.
Do not use the device in environments subject to sudden changes in temperature.
In the event that the device emits strange noises or the presence of bad smells or smoke, immediately remove the power supply and contact the technical service.
In case of plug failure, do not use adapters but contact the technical service.

SAFETY INFORMATION

Make sure that the plug is properly connected to the electrical outlet and that the voltage complies with the indications on the label.
In case of damage to the wire, do not repair it. Contact the technical service.
Make sure that the plug is connected correctly and that it is not subjected to underload or overload.
Place the device at least 20cm away from the wall or objects and have a space of at least 30cm for the top fan.
Use only original filters suitable for this device. Do not use different filters. Do not insert any object inside the device.
Turn off the device before cleaning or repairing it.

PRODUCT DESCRIPTION

mach power HC SWAP50 Air Purifier - DESCRIZIONE
PRODOTTO

1	Front cover
2	Panel
3	Filter
4	Centrifugal impeller group
5	Air quality sensor

INSTALLATION GUIDE

First use

Read carefully and keep this manual for future reference.
Remove all packaging and clean all removable parts with a soft, dry cloth.
Place the device in a dry place and on a stable and horizontal surface. Make sure there is at least 20cm clearance from the wall and objects.
When using the device you can hear a slight sound (“ZZZ”), don’t worry it’s normal noise.

OPERATION

Plug the device into the power outlet

ON / OFF
Power ON: Press the On / Off button on the remote control to turn on the device. Each time the device is turned on it will start up at a default speed.
Power OFF:
Press the On / Off button to turn off the device.
Fan speed
Select the desired fan speed by pressing the “Mode” button.
General Mode : In the presence of a large number of people, it is recommended to select the highest fan speed.
Quiet mode: low fan speed. It is the one suggested.
High-Efficiency mode: it is the recommended choice when there is a high presence of dust, pollen, or a large number of people inside the room.
Timer setting
It is possible to select the timer from 1 to 8 hours.
UV sterilization
Press the ON / OFF key to turn on the display, and press the Disinfect key to start UV sterilization.
( Note: The UV sterilization function is optional, it depends on the model).

CLEANING AND MAINTENANCE

Disconnect the power supply before cleaning the filter.
Clean the camera body: use a soft and dry cloth to clean from surface dust and stains. (Note: in case of excessive dirt use a damp cloth and wipe gently, do not use abrasive substances.)
Clean the vents: use a soft brush to remove dust from the vents.

TROUBLESHOOTING

The device is not working properly:
Check the power supply and turn the device back on.
No air comes out of the device:
Check the power supply and turn the device back on.
The device has been in operation for a long time, but the air quality has not improved:
It is possible that inside the room there is a high presence of dust or pollen. If you need to increase the fan power and leave it running for longer.
The device is making strange noises:
Make sure all packaging has been removed.
Make sure that the air vents are not obstructed by objects. Remove any obstacles.
If noises are still present, contact the technical service.

For any information and product updates