NightRider LEDS NSB-WSMP Gen2 Beacon Switch Instructions
- July 15, 2024
- NightRider LEDS
Table of Contents
NightRider LEDS NSB-WSMP Gen2 Beacon Switch
Product Information
Specifications
- Product: Gen2 Beacon Switch
- Compatible with 17 beacons: NSB-BAR17CLR, NSB-BAR17AMB, NSB-BAR17AB
- SKU: NSB-WSMP
Product Usage Instructions
When connecting your beacon to the momentary actuator switch, follow these steps:
- Connect your beacon’s YELLOW pattern select wire to the switch’s WHITE pattern select wire.
- Ensure proper wiring as follows:
- Switch:
- WHITE: Pattern Select
- RED: Positive
- BLACK: Ground
- Beacon:
- YELLOW: Pattern Select
- RED: Positive
- BLACK: Ground
Note: NightRiderTM LEDS recommends contacting a dealer or qualified professional for installation if unsure about your electrical system.
If you need further assistance or information, please contact your local dealer or visit www.nightriderleds.com.
FAQ
- Q: What should I do if I am unsure about my electrical system?
- A: It is recommended to contact your dealer or a qualified professional automotive/equipment technician for assistance with installation.
- Q: How many beacons are compatible with the Gen2 Beacon Switch?
- A: The Gen2 Beacon Switch is compatible with 17 beacons: NSB-BAR17CLR, NSB-BAR17AMB, NSB-BAR17AB.
Introduction
- Thank you for purchasing a genuine NightRider™ LEDS product.
- Please use this Gen2 Beacon Switch for hardwiring the following 17″ beacons:
- NSB-BAR17CLR, NSB-BAR17AMB, NSB-BAR17AB
WIRING
- NightRider™ LEDS
- 17″ Beacons
- (NSB-BAR17CLR, NSB-BAR17AMB, NSB-BAR17AB)
- WIRING YOUR BEACON to the Momentary Actuator Switch
- Please make sure to connect your beacon’s YELLOW pattern select wire to the switch’s WHITE pattern select wire.
Actuator Switch
- WHITE: Pattern Select
- RED: Positive
- BLACK: Ground
NightRider™ LEDS takes no responsibility for incorrect installation and/or damages related. This guide is for reference purposes only. If unsure about your electrical system, contact your dealer or qualified professional automotive/equipment technician. It is the vehicle operator’s responsibility to ensure all product installations are properly, safely, and legally installed under regional regulations of use.
CONTACT
- For more information contact your local dealer. Find a dealer: www.nightriderleds.com.