NightRider LEDS NSL50AW Scene Light with Amber Warning Light User Guide
- June 16, 2024
- NightRider LEDS
Table of Contents
SCENE LIGHT
with Amber Warning Light
Thank you for purchasing a genuine NightRider™ LEDS product.
Please read the following information carefully before installing and using
this product.
Installation and Operation Instructions
Specifications
| Size | 236x80x37mm |
|---|---|
| Scene Light Power | 48W |
| Warning Light Power | 18W |
| Raw Lumen | 3500lm |
| Scene Light Angle | Down 45° |
| Warning Light Angle | Horizontal 180° |
| Waterproof | IP67 / IP69K |
| Flashing patterns | 12 Patterns |
| ECE Approval | ECE R65, ECE R10, R23 |
| Other Approval | CE, CA |
| Voltage | 10-30V |
| Housing Material | AluminiumHousing, PC Cover |
| Mounting | ScrewMount |
| Cable | 0.3M cable |
| Gasket | Rubber |
Wiring Instructions
Amber Strobe Positive| | Red (10-30V DC only, can be used as a reversing l i
ght
---|---|---
Scene Light Positive| | Yellow (10-30V DC only)
Negative Ground| | Black
Flash Pattern and SYNC| | Green (Momentarily touch for next pattern, touch for
5 second go back to first pattern)
Asynchronous| | White
Synchronized Flash Setting
- Connect all the Green wires together, and touch the Green wires to the positive for 5 seconds, and then all the lights will go back to the first flash pattern and will flash in SYNC.
- Momentarily touch the Green wires to the positive for next pattern.
Asynchronous Flash Setting
- Connect all the Green wires together, and touch the Green wires to the positive for 5 seconds, and then all the lights will go back to the first flash pattern and will flash in SYNC.
- Momentarily touch the Green wires to the positive for next pattern.
- Connect all the white wires of all the lights you want to be asynchronous to the positive+, and the lights will flash asynchronously. +(connect to the +, then this light will flash asynchronously)
Dimensions
Flash Patterns
*FPM: Flashes Per Minute
| NO. | PATTERNS. | FPM | MS |
|---|---|---|---|
| 1 | Single Flash (100% brightness) | 150 | 400 |
| 2 | Single Flash (50% brightness) | 150 | 400 |
| 3 | Double Flash (100% brightness) | 150 | 400 |
| 4 | Double Flash (50% brightness) | 150 | 400 |
| 5 | Slow Single Flash | 75 | 800 |
| 6 | Triple Flash | 120 | 498 |
| 7 | Quadruple Flash | 120 | 498 |
| 8 | Quintuple Flash | 78 | 765 |
| 9 | Single + Double | 66 | 910 |
| 10 | Single + Triple | 61 | 990 |
| 11 | Single + Quintuple | 49 | 1230 |
| 12 | Strobe Flash | 600 | 100 |
| 13 | Cruise (30% Brightness) |
- Only a qualified automotive electrician should install this product. Do Not install this product if unsure.
- Failure to use specified installation parts or hardware will void the product warranty.
- For this product to operate at optimum efficiency, proper grounding is required.
- Do not install and/or operate this safety product unless you have read and understand the safety information contained in this manual.
IMPORTANT! THIS UNIT IS A SAFETY DEVICE, AND MUST BE CONNECTED TO ITS OWN SEPARATE, FUSED POWER POINT TO ASSURE ITS CONTINUED OPERATION WHEN ANY OTHER ELECTRICAL ACCESSORIES FAIL.
References
Read User Manual Online (PDF format)
Loading......