NightRider LEDS NSTK28 Wireless Trailer Light Kit Instruction Manual
- June 12, 2024
- NightRider LEDS
Table of Contents
NightRider LEDS NSTK28 Wireless Trailer Light Kit
Contents
Charging
2- 2.5 hours / 5V DC
Plug supplied charging chord into each light and then plug into USB port. Charging will take about 2 – 2.5 hours. There is a charge indicator on the side of each light.
Installation
Insert transmitter into the vehicle’s trailer wire plug.
Turn ON
Push button on back of light for less than one second:
The power indicator light (see magnification left) will turn on. At the same
time, the license plate lights will light up for about 30 seconds.
Turn OFF
Push button on back of light for less than one second:
The power indicator light (see magnification left) will turn off. At the same
time, the license plate lights will light up for about 30 secons.
Turning Licence Plate Lights ON/OFF
Press down button for 3 seconds to turn on the license plate lights separately.
When License Plate Lights are turned on, press down button for 3 seconds to turn off the license plate lights.
Pairing
Turn your vehicle on.
Turn your lights on.
Transmitter will automatically start passing signals to the wireless tail lights
Testing
Make sure to test all the functions of your lights and ensure that they are in good working order before using them on the road.
Mounting
Run Time
Full Charge: ~8 Hours
Half Charge: ~4 Hours
Quarter Charge: ~2 Hours
Run times are approximate values only.
Specifications
Input Voltage
| 5V DC
---|---
Transmitter Frequency
|
2.4G
Radio Communication Range
| 30 Meters
Battery Capacity|
2,600mAh
Charging Time
| 2 – 2.5 Hours
IP Rating|
IP65 – weatherproof
Operating Temperature|
-25ºC to 65ºC
- Fully charge batteries in both lights before first use.
- Check battery life before each use.
- Test that all functions of the lights are working properly.
- If not in use, charge lights every 6 months.
- Any additional or replacement light must be paired before use.
- Check lights regularly when in use for several hours.
- Always consult your vehicle’s owner manual for compatibility with trailer lighting.
Customers Support
