NightRider LEDS N9REM Side Shooter Light Kit Instruction Manual
- June 12, 2024
- NightRider LEDS
Table of Contents
Wiring Instructions for Jet Black Series Side Shooter
Light Kit with Amber Warning Function (NJSS2EMAW)
Instruction Manual
N9REM Side Shooter Light Kit
CONGRATULATIONS AND THANK YOU FOR PURCHASING GENUINE NIGHTRIDER™ LEDS.
Night Rider™ LEDS is proud to provide you the Night Driver™ Series
Professional Street Legal* LED lighting.
PLEASE READ ALL INFORMATION IN THIS DOCUMENT BEFORE INSTALLATION AND USE.
Night Rider™ LEDS products are designed to be easily installed by qualified
professional automotive technicians.
Please remember it is the vehicle owner’s responsibility to ensure all product
installations are properly, safely and legally installed in accordance to the
regional regulations of use. Night Rider™ LEDS takes no responsibility for
incorrect installation and/or any related damages.
WARNING!
Only use the included Night Rider™ LEDS recommended wiring harness to wire
Night Rider™ LEDS lights.
Night Rider LEDS lights have unique circuitry that can easily be damaged when
using wiring not built for Night Rider™
LEDS lights. If ever unsure contact your dealer or a qualified professional
automotive/equipment technician.
Recommended Installation
The following installation procedures are for guidance only, not to be used in
place of regional regulations and safety measures.
Al screws, bolts and nuts used in the installation of Night Rider™ LEDS lamps
and mounting hardware should be tightened snug and checked after the first
30km for secure fitment. Night Rider™ LEDS recommends using a medium strength
liquid or gel thread-locker.
Wiring Night Driver Auxiliary Driving Lights to Vehicle High Beams (Required
in most North American Jurisdictions)
Night Rider™ Side Shooter Lights with Amber Warning Lights
“Always check with regional rules and regulations regarding the use of
auxiliary driving lights. Night Rider™ LEDS strives to deliver the safest and
most lawful lights, but cannot be held accountable for regional restrictions,
improper mounting, aiming, or wiring.
AUXILIARY LIGHT MOUNTING POSITION AND BEAM AIM
The mounting and aiming illustrations below are for reference and guidance
only.
Always refer to the applicable rules and regulations in the region you are
using auxiliary driving lights.
Image 2. Excerpt from the Motor Vehicle Act of British Columbia, Canada.
Auxiliary driving lamps
4.09
- A motor vehicle may be equipped with 2 auxiliary driving lamps, mounted on the front of the vehicle at a height of not less than 40 cm and not more than 1.06 m, that are capable of displaying only white light.
- An auxiliary driving lamp must be directed so that the high intensity portion of the beam is, at a distance of 8 m from the lamp, at least 12 cm below the height of the lamp and, at a distance of 25 m from the lamp, not higher than 1.06 m from the road surface.
- An auxiliary driving lamp must operate so that it is illuminated only when the upper beam of a multiple beam headlamp is illuminated. [en. B.C. Reg. 476/98, s. 2.]
Upon request Night Rider™ LEDS will supply the appropriate SAE or ECE test report for your Night Driver™ Series LED Light to an authorized authority for inspection and confirmation of compliance.