Posey 5700 Patient Safety Roll Guard for Hospital Beds Instruction Manual
- July 19, 2024
- Posey
Table of Contents
Posey 5700 Patient Safety Roll Guard for Hospital Beds Instruction Manual
Posey Roll Guards offer a less restrictive alternative to side rails or may be used as padding when side rails are raised. They help prevent high-risk patients from rolling out of bed, while allowing sufficient room for patient comfort. The Posey Roll Guards easily attach to a bed with quick-release buckles. The zippered compartments allow easy removal of the inner bead filled bags, which are covered in a wipe clean vinyl.
Product Features:
- Helps prevent patients from rolling out of bed, while allowingpatient to see out.
- Soft, flexible Posey Roll Guards act as a barrier to protect thepatient from banging into side rails when in use.
- Will fit standard twin and hospital style beds.
- Overall Dimensions: 25”L x 43”W (64 cm x 109 cm). Inner widthbetween rolls: 23”W (58 cm). Roll Dimensions: 25”L x 9”D (64 cmx 23 cm). Straps (4): 33”L x 1”W (84 cm x 3 cm).
- Meets CA #117, Section E Flame Retardancy Standards.
Monitoring
**** This device is not a substitute for side rails or other protective devices for patients at risk of injury from falls due to unassisted bed exit. ALWAYS follow your facility’s policies and procedures for patient assessment, monitoring and rehabilitation.
Application Instructions:
- Inspect product prior to use. DO NOT use soiled or damagedproducts.
- Place the Posey Roll Guards on top of the mattress with thequick-release buckles away from the patient. The Posey RollGuards should be on top of the attachment straps.
- Position the Posey Roll Guards approximately 20” (51 cm) fromthe headboard.
- Wrap the quick-release straps once around the movable part ofthe bed frame and secure the buckles.
Laundering Instructions:
Brushed Polyester Cover Only:
Cleaning Instructions:
Vinyl Cover and Internal Bead Filled Bags:
Wipe Clean with soap and water or disinfectant.
Disposal
**** Properly dispose of the product per facility’s policy for BIOHAZARDOUS materials.
Storage and Handling
This device is designed for use in normal indoor environments. This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may damage product materials.
TIDI Products, LLC • 570 Enterprise Drive, Neenah, WI 54956 USA
Phone: 1.800.521.1314 • International: +1.920.751.4036 •
www.tidiproducts.com
© 2024 TIDI Products, LLC. All rights reserved. Posey is a registered trademark of TIDI Products, LLC.
Read More About This Manual & Download PDF: