2E E2020B LCD Monitor User Manual

2E E2020B LCD Monitor

Product Information

Warnings/Safety Precautions

• RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover and back panel. There are no user-serviceable parts inside. In case of damage or error, refer servicing to qualified personnel.
• Lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock in case of improper usage of the product.
• Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product.

Important Safety Instructions

1. Please read all the instructions carefully before using this product.
2. The instructions should be retained after reading for future reference.
3. Please immediately pull out the AC power plug from an adapter if there is an abnormal sound or smell or the monitor has no picture, and contact after sales support.
4. The monitor should be kept free from rain, damp, and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers, etc.
5. The monitor should be kept away from heating objects or direct sunlight. This product requires good ventilation. Allow 10 cm between the monitor and other appliances or built-in cabinet walls.
6. You may clean the display panel with a soft clean cloth after pulling out the power plug. Do not repeatedly wipe the panel, nor scrape, tap or strike the panel with hard objects, etc.
7. Do not wipe the monitor with any petrol chemical or alcohol-based solvents, as it will lead to product damage to the panel and cabinet.
8. Do not place the monitor on an unstable surface.
9. Do not place the power cord or other cables across a walkway in case it is trampled on, especially at the points of connection to the plug, sockets, and the power cord to the appliance.
10. Unplug the appliance during a lightning storm or when it is not used for a long period of time.
11. Unplug this product when the device, power cord or plug are damaged or if the device has been exposed to moisture.

Product Usage Instructions

• Components and auxiliary equipment: The LCD Monitor E2020B includes a power indicator and control buttons for adjusting brightness, image, color, OSD settings, reset, and other miscellaneous functions.
• Input voltage: Ensure that the monitor is connected to a compatible power source with the correct input voltage.
• Control monitor: Use the control buttons to navigate and adjust various settings on the monitor.
• OSD MENU: Access the On-Screen Display (OSD) menu to customize settings such as brightness, image, color, and other OSD settings.
• Brightness: Adjust the brightness level of the display using the control buttons or OSD menu.
• Image: Customize image settings such as contrast, sharpness, and aspect ratio using the control buttons or OSD menu.
• Color: Adjust color settings such as saturation, hue, and color temperature using the control buttons or OSD menu.
• OSD setting: Customize various OSD settings such as language, timeout, and position using the control buttons or OSD menu.
• Reset: Reset the monitor settings to their default values using the control buttons or OSD menu.
• Misc: Access other miscellaneous functions and settings using the control buttons or OSD menu.

Warnings/Safety precautions

• TO REDUCE THE RISK OF ELECTRIC SHOCK,
• DO NOT REMOVE COVER AND BACK PANEL THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
• I CASE OF DAMAGE OR ERROR REFER SERVICING TO QUALIFIED PERSONNEL.
• Lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock in case of improper usage of the product.
• Exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product.

WARNING:

• Do not put the monitor in rainy or foggy places to prevent from fire or electric shock.
• To prevent scratches or damages to the LCD screen, do not knock, apply or rub the surface with sharp or hard objects or stiff cloths as well as try not to touch the LCD screen with your hands.
• Any modifications to this product that have not been clearly and explicitly approved in advance by the manufacturer responsible for compliance with these regulations are forbidden.

ATTENTION:
Excessive sound pressure from earphones and headphones can cause hearing loss.

Important safety instructions

1. Please read all the instructions carefully before using this product.
2. The instructions should be retained after reading for future reference.
3. Please immediately pull out the AC power plug from an adapter if there is an abnormal sound or smell or the monitor has no picture, and contact after sales support.
4. The monitor should be kept free from rain, damp and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers etc.
5. The monitor should be kept away from heating objects or direct sunlight. This product requires good ventilation. Allow 10 cm between the monitor and other appliances or built-in cabinet walls.
6. You may clean the display panel with a soft clean cloth after pulling out the power plug. Do not repeatedly wipe the panel, nor scrape, tap or strike the panel with hard objects, etc.
7. Do not wipe the monitor with any petrol chemical or alcohol-based solvents, as it will lead to product damage to the panel and cabinet.
8. Do not place the monitor on an unstable surface.
9. Do not place the power cord or other cables across a walkway in case it is trampled on, especially at the points of connection to the plug, sockets and the power cord to the appliance.
10. Unplug the appliance during a lightning storm or when it is not used for a long period of time.
11. Unplug this product when the device, power cord or plug are damaged or if the device has been exposed to liquid or moisture, has been mechanically damaged and does not work properly and contact an authorized service centre immediately.
12. Keep this appliance away from liquids, splashes of water and do not place objects filled with liquids on it.
13. Do not disassemble the back cover as it contains high voltages inside and will cause electric shock. There is no spare parts inside. Internal adjustments and checks should only be conducted by qualified professionals.
14. Do not place naked flame sources, such as lit candles on or near the monitor. Please pull out the power plug and contact after sales support if there are abnormal objects or water in the monitor.

Operating Instructions

Components and auxiliary equipment
Before assembling and installing, check for following items to be included in this display package.

Input voltage
DC 12V 2.5A power input. External power supply: AС 100-240V – 50/60Hz 0.8A Please consult the back label

Power indicator

Functions

Statement: this document is a reference manual. Please refer tol the actual product.

Control monitor

• MENU key
•  LEFT key/Contrast hot key
•  RIGHT key/Brightness hot key
•  Auto/Exit key
•  Power standby key
  Function Key Guide may vary depending on the function or product model. Please refer to the actual product.

OSD menu

• BRIGHTNESS
  In this section, you can adjust brightness, contrast, and other display settings.

  • BRIGHTNESS – This setting adjusts dark color balance of the image. If the value is set too high, the image will look blurred. If the value is set too low, the image will be too dark and will not have clear outlines.
  • CONTRAST – This setting adjusts white balance of the image. If the value is set too high, the image will be too bright and will not have clear outlines. If the value is set too low, the image will look blurred.
  • ECO – This setting has several standard display modes: Standard, Movie, Text, Game, FPS, RTS.
  • DCR (DYNAMIC CONTRAST) – Allows you to automatically adjust brightness and contrast of the screen to display darker areas of the image.
  • HDR MODE – High Dynamic Range – HDR makes white color brighter and black color deeper. This makes the image on the monitor more realistic. The following modes are available: On / Auto / Off.

• IMAGE
  In this section, you can adjust image position on the monitor screen.

  • H.POSITION – This setting adjusts horizontal position of the image.
  • V.POSITION – This setting adjusts vertical position of the image.
  • CLOCK – This setting changes width of the image.
  • PHASE – This setting reduces halos and makes the image clearer.
  • ASPECT – Allows you to select the following image formats: «Wide» (16:9) or «4:3».

• COLOR
  In this section, you can adjust color temperature.

  • COLOR TEMP. – This setting allows you to select one of the color presets: Cool, Custom, Warm, Normal.
  • RED – This setting adjusts display intensity of red color.
  • GREEN – This setting adjusts display intensity of green color.
  • BLUE – This setting adjusts display intensity of blue color.
  • LOW BLUE FILTER – Provides comfort when working for a long time, reduces eye strain.

• OSD SETTING
  In this section, you can change and adjust the onscreen menu settings.

  • LANGUAGE – This setting allows you to select the onscreen menu language.
  • OSD H.POS. – This setting allows you to adjust horizontal position of the on-screen menu.
  • OSD V.POS – This setting allows you to adjust vertical position of the on-screen menu.
  • OSD TIMER – This setting allows you to set display time of the on-screen menu.
  • TRANSPARENCY – This setting helps you adjust the transparency of the on-screen menu.

• RESET
  In this section, you can automatically adjust basic image settings and reset all settings to their default values.

  • IMAGE AUTO ADJUST – Automatically adjusts image settings.
  • C OLOR AUTO ADJUST – Automatically adjusts image color settings.
  • RESET – This setting resets all the on-screen menu settings to their default values.

• MISC
  Includes advanced image and sound settings.

  • SIGNAL SOURCE – Allows you to select the port through which the input video signal will be fed to the monitor:
  • HDMI – Sets the HDMI port as the monitor video source.
  • VGA – Sets the VGA port as the monitor video source.
  • MUTE – Turns off the sound.
  • VOLUME – Allows you to change the volume.
  • FREE SYNC – Supports increased screen refresh rate to reduce tearing and improve screen responsiveness.

Specifications

Frequency

| HDMI 1.4 1600900 75Hz
VGA 1600900 60Hz
Built-in speakers| No
Screen tilt| 15°/5°
Height adjustment| No
Power consumption in operating mode| <30W
Standby power consumption| ≤0.16W
Wall mounting| Yes, VESA 75×75
Package dimensions| 515x105x387 mm
Weight (NET/GROSS):| 1.8 kg/2.5 kg

Troubleshooting

into the socket appropriately and the wall socket is operational

No Input signal message

| Check that the signal line is connected properly.

Check that the power of the relevant peripherals is turned on.

Check that the Input option tnat has been selected matches with the input signal.

Image colour or quality deteriarates| Check that all the video settings are adjusted appropriately, such as brightnešs, contrast, colour etc.
Display warning message| Check that the input signal line is properly fixed. Select the correct input signal source

Additional information

The production date is encrypted in the serial number in the format
ERC2E * YYYYMMDD *****, where: YYYYMMDD – year, month and day of production.

WARRANTY CONDITIONS

Dear Customer! Thank you for buing the 2E product that has been designed and manufactured in accordance with and complying to the highest quality standards.
We ask you to keep the warranty card during the whole warranty period. When purchasing a product, ask for a complete filling in of the warranty card.

1. The Warranty Card is valid only if the following informationis correctly and clearly stated: model, serial number of the product, date of sale, warranty period, clear seals of the company-seller, signature of the buyer.

2. Service life of the product is 24 months.

3. The product is intended for domestic use only. When using the product in commercial conditions the seller/manufacturer does not bear warranty obligations, the service is carried out on a paid basis.

4. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law of «On Protection of Consumers’ Rights».

5. No warranty is given with respect to any consumer violation of the operating rules set forth in the instructions.

6. The product warranty service is cancelled from the in the following cases:

   • use for other purposes and not for consumer purposes;
   • mechanical damage;
   • damage caused by the ingress of objects, substances, liquids, insects into the product;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, household factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power supply parameters, cable networks with state standards and other similar factors;
   • in case of violation of the seals installed on the product;
   • ansence of serial number of the device, or inability to identify it.

7. The plant guarantees normal operation of the product within 12 months from the date of the sale.
   Tear-off maintenance cards are provided by an authorized service center.

8. The complete set of the product has been checked. I am familiar with the terms of warranty service, no complaints.

Warranty card

References

• Компания ERC: Сервис-центр(СЕРВІСНИЙ ЦЕНТР)
• Yurd.az

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>