BANWOOD B09GZ942T6 Children’s Scooter Instruction Manual

BANWOOD B09GZ942T6 Children’s Scooter

Product Information

Specifications:

• Maximum Weight Capacity: 50kg (110lbs)
• Maximum Height: 0.95m (3’1″)

Product Usage Instructions

Assembly

1. Align parts A and B, then click them together.
2. Adjust the height to your preference by extending the scooter to 80cm, 75cm, or 70cm.

Usage

1. Make sure all parts are securely connected.
2. Always wear appropriate safety gear before riding the scooter.
3. To ride, push off the ground with your foot and balance yourself on the scooter.

Maintenance

1. Regularly check for loose parts or signs of wear and tear.
2. Keep the scooter clean and dry to prevent rusting.

Storage

1. Store the scooter in a dry place away from direct sunlight or moisture.
2. Avoid leaning the scooter against surfaces that may cause it to tip over.

FAQ:

• Q: What is the maximum weight capacity of the scooter?
  A: The scooter can support up to 50kg (110lbs).

• Q: How do I adjust the height of the scooter?
  A: Extend the scooter to either 80cm, 75cm, or 70cm according to your preference.

• Q: How should I maintain the scooter?
  A: Regularly check for loose parts, keep it clean and dry, and store it in a suitable environment.

DESCRIPTION

INSTALLATION

Keep the instructions for future.

• This product is not suitable for stunts or jumps!
• Warning! Not suitable for children under 36 months, unstable base, fall hazard.
• Warning! Protective equipment should be worn. Not to be used in traffic. Not for children with a body mass of more than 50 kg. Remove the scooter and all the parts from the box. Set out all the parts and read the assembly instructions prior to use. Keep the packaging until assembly is complete.

General instructions

This toy must be assembled by a responsible adult. Prior to use, make sure that the toy has been assembled properly. Remove all the parts which are not necessary for play before giving the toy to your child. The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. To use with suitable protective equipment, including a helmet, shoes, elbow, wrist and knee protectors. Teach the child how to use it safely and responsibly.

FEATURES

Directions:

• Make sure that all locking devices are securely engaged.
• The scooter can be dangerous and can cause traffic accidents when used on public highways. Don’t use on the on public roads. It is best used on a flat, clean surface, free of gravel and grease.

Avoid bumps and drainage grates that may cause an accident.

• The scooter does not include any headlights or lights. It is therefore not suited for use at night or during periods when visibility is limited.
• Always use under adult supervision.
• Do not allow more than one child to ride the scooter at the same time.
• Height adjustable handlebar which can be adapted to the child’s height. 3 ·

Positions:

• Low position: 70 cm
• Middle position: 75 cm
• High position: 80 cm

During use:

• Standing on the scooter, one hand on each handle, push with one of your feet to move forward. Proceed with caution at the start.
• Braking: a brake is located at the rear, when necessary press down on it to slow down. Press down gradually in order to prevent skidding or loss of stability.
• Shoes are mandatory and we strongly advise you to wear trousers and long sleeve shirts to avoid injury if you fall.
• Explain to the child clearly how to lock the scooter before any use.

Care / Maintenance

Regular maintenance is a safety commitment:

• Wheel bearings: avoid going through water, oil or sand as this can damage wheel bearings.
• Wheels: the wheels wear down with time and can be damaged if overly used on rough surfaces. The back wheel onwhich the brake is applied is particularly affected after several hours of braking. In the interests of safety, they should be checked regularly and changed if necessary.
• Modifications: the original product must by no means be modified except for the maintenance-related changes mentioned in these instructions.
• Nuts and axles: these should also be checked regularly.
• They can become loose after a while in which case they should be tightened.
• They can become worn and not tighten properly, in which case they should be replaced.
• Cleaning: Clean the scooter with a soft cloth and a little water.

Additional Info
For questions and inquiries please contact us at: [email protected].

www.banwood.com
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>