RYOBI RY3112SH EZ CLEAN POWER CLEANER SPRAY HEAD ATTACHMENT User Guide
- June 5, 2024
- RYOBI
Table of Contents
RYOBI RY3112SH EZ CLEAN POWER CLEANER SPRAY HEAD ATTACHMENT User Guide
WARNING
To reduce the risk of injury, user must read and understand the operator’s
manual for their power cleaner before using this accessory. To reduce the risk
of injury or property damage, spray the pressure stream in a safe direction to
ensure proper
connection of all accessories before starting any cleaning project. Fits most
power cleaners. Ensure compatibility and proper fit before using this
accessory. Wear eye protection marked to comply with ANSI Z87.1. Risk of fluid
injections; do not point at electrical devices or the unit itself. Remove
battery from tool before changing or adjusting accessories. For cold water use
only. For outdoor use only – store indoors. Save these instructions. Refer to
them frequently and use them to instruct other users. If you loan someone this
tool, loan them these instructions also.
APPLICATIONS
You may use this product for the purposes listed below:
- Hands, feet, pets, recreation equipment, or sports gear
CONNECTING THE RINSING NOZZLE TO THE POWER CLEANER
See Figure 1.
- A – power cleaner
- B – quick connector
- C – power cleaner 7-pattern rinsing nozzle
- Align the arrows and insert the end of the rinsing nozzle into the power cleaner and push it until it clicks into place.
- Pull on the rinsing nozzle to be certain it is properly secured.
- To remove, press the button on the power cleaner and pull to remove the rinsing nozzle.
SELECTING THE RIGHT SPRAY PATTERN FOR THE JOB
See Figure 2.
Each of the 7 nozzles has a different spray pattern. Before starting any rinsing project, determine the best nozzle for the job. Rotate the nozzle until the desired position is selected.
TECHTRONIC INDUSTRIES POWER EQUIPMENT
P.O. Box 1288, Anderson, SC 29622 USA
1-800-525-2579 •
www.ryobitools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>