Posey 5742 Seizure Side Rail Pads Instruction Manual

Posey 5742 Seizure Side Rail Pads

Specifications

• Product Name: Posey Seizure Side Rail Pads
• Model: REF 5764 (Fits In-TouchTM Critical Care Beds), REF 5766 (Fits S3TM Beds)
• Compatibility: Designed for use with specific bed models as mentioned above
• Material: Shear nylon covers
• Storage: Indoor environments at normal humidity levels
• Cleaning: Wipe clean with soap and water, avoid Phenol or Benzyl-containing disinfectants

Product Usage Instructions

1. Inspect product set before use, do not use soiled or damaged products.
2. Identify components, each pad has sewn-in tags indicating intended location (refer to Fig. 1).
3. Place pads on the proper side rail and shift into position (refer to Fig. 2).
4. Securely fasten all hook-and-loop fasteners along the edges of each pad. Some pads may have additional fasteners in mid-sections (see Fig. 3 and Fig. 4).
5. Lower side rails to check clearances, expect some resistance as rails are lowered. Nylon covers minimize binding (refer to Fig. 3).
6. Check for proper fit, modified beds may not be compatible.

Cleaning Instructions

Wipe clean with soap and water or disinfectants without Phenol or Benzyl. Do not submerge pads in liquid.

Disposal

Dispose of the product according to facility’s BIOHAZARDOUS materials policy.

Storage and Handling

Store in normal indoor environments at ambient temperatures with normal humidity levels. Avoid excess moisture or high humidity.

FAQ

• Can these pads prevent a patient from exiting the bed?
  The pads will not prevent a determined patient from exiting the bed but are designed to provide some level of protection.

• Can these pads be used on any hospital bed?
  Not all hospital beds allow for full articulation when these pads are applied. It is recommended to slowly articulate the head of the bed to ensure compatibility.

INTRODUCTION

Posey Seizure Pads are form fi tted to fi t snugly over the existing bed side rails with a 1″ (3 cm) layer of medium density foam to help safeguard against accidental patient injury. The outer shell is constructed from lightweight sheer nylon denier to help prevent patient “rub” burns and allows unobstructed movement of the side rails to the lowered position. The nylon cover is backed with a urethane waterproof coating that easily wipes clean with liquid disinfectant. Open windows in upper section allow for easy access to controls on most bed models. Navy Blue.

PARTS LIST

Monitoring

Posey Seizure Side Rail Pads will not prevent a determined patient from exiting the bed, going over or attempting to go between or through side rail gaps. Not all hospital beds allow for full articulation when this product is applied. Slowly articulate the head of the bed to ensure compatibility. Always follow your facility’s policies and procedures for patient assessment, monitoring and rehabilitation.

Application Instructions

1. Inspect product set prior to use. Do not use soiled or damaged products.
2. Identify each of the components in the set. Each pad has sewn-in tags, identifying its intended location from the perspective of lying down in the bed (Fig. 1).
3. Place each of the pads onto the proper side rail and shift it into position (Fig. 2).
4. Securely fasten all the hook-and-loop fasteners along the edges of each pad. Some pads may have additional hook-and-loop fasteners in their mid-sections, for those pads please see Fig. 3 and Fig. 4.
5. Lower each of the side rails to check clearances. Note that there may be some resistance as the rails are completely lowered. This should be expected as there are close manu facturing tolerances between the bed and the side rail. The shear nylon covers are chosen to minimize any potential binding.
6. Check for proper fi t. Modifi ed beds may not be compatible with Posey Seizure Side Rail Pads.

Disposal

Properly dispose of the product per facility’s policy for BIOHAZARDOUS materials.

Storage and Handling

This device is designed for use in normal indoor environments. This device may be stored in ambient warehouse temperatures at normal humidity levels. Avoid excess moisture or high humidity that may damage product materials.

Cleaning Instructions:

Wipe clean with soap and water, or disinfectants that

• DO NOT contain the chemicals Phenol or Benzyl.
• DO NOT submerge pads under any liquid solution.

ABOUT COMPANY

• TIDI Products, LLC
• 570 Enterprise Drive, Neenah, WI 54956 USA
• Phone: 1.800.521.1314
• International: +1.920.751.4036
• www.tidiproducts.com

References

• Medical Products for Staff & Patient Safety | TIDI Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>