CANADIAN SPA MANITOBA SPA 4 Person Portable Patio Spa Owner’s Manual

July 14, 2024
CANADIAN SPA

CANADIAN SPA MANITOBA SPA 4 Person Portable Patio Spa

Specifications

  • Product: Manitoba Spa
  • Type: Portable Plug & Play – Black Ice Series
  • Owner’s Manual: 60Hz
  • Electrical: 120V/15A
  • Weight: 400 lbs (Dry), 1550 lbs (Filled)
  • Water Capacity: 550 L
  • Jet Count: 15
  • Seat Count: 4
  • Size: 67 x 60 x 29
  • Pump(s): 1 x 2 Speed 1.5 HP
  • Heater: 1.5 kW
  • Filter(s): 1 x 50sq ft Glacier Antimicrobial Filter (KA-10082)

Safety Information
NORTH AMERICA (60Hz)

IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment be sure to follow these basic safety precautions:

  • WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
  • DANGER: Risk of accidental drowning. Extreme caution must be exercised.

Product Usage Instructions

Installation

  1. Place the spa on a flat, stable surface near a power outlet.
  2. Fill the spa with water up to the recommended level.
  3. Plug the spa into a 120V/15A electrical outlet.

Operation

  1. Turn on the pump and adjust the speed as desired.
  2. Adjust the heater to set the water temperature.
  3. Use the jets to create a relaxing spa experience.

Maintenance

  1. Regularly clean the filter to ensure proper water circulation.
  2. Check the water chemistry and adjust as needed to maintain balance.
  3. Keep the spa cover securely in place when not in use to prevent debris accumulation.

Frequently Asked Questions (FAQ)

  • How often should I clean the filter?
    We recommend cleaning the filter once every 2-4 weeks, depending on usage.

  • Can the spa be used in cold weather?
    Yes, the spa is designed for outdoor use and can be used in various weather conditions.

MANITOBA SPA
Portable Plug & Play – Black Ice Series Owner’s Manual – 60Hz

  • Electrical: 120V/15A
  • Weight: 400 lbs (Dry), 1550 lbs (Filled)
  • Water Capacity: 550 L
  • Jet Count: 15
  • Seat Count: 4
  • Size: 67” x 60” x 29”
  • Pump(s): 1 x 2 Speed 1.5 HP
  • Heater: 1.5 kW
  • Filter(s): 1 x 50sq ft Glacier Antimicrobial
  • Filter (KA-10082)

SAFETY INFORMATION

NORTH AMERICA (60Hz)

IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment be sure to follow these basic safety precautions:

  1. WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.

  2. DANGER: Risk of accidental drowning. Extreme caution must be exercised to prevent unauthorised access by children. To avoid accidents, ensure that children cannot use this spa unless they are supervised at all times.

  3. DANGER: Risk of injury. The suction fittings in this spa are sized to match specific water flow created by the pump. Should the need arise to replace the suction fitting or the pump, ensure that the flow rates are compatible. Never operate the spa if suction fittings are broken or missing. Never replace a suction fitting with one rated less than the flow rate marked on the original suction fitting.

  4. DANGER: Risk of Electrical Shock. Install at least 5ft (1.5m) from all metal surfaces. As an alternative, spa may be installed within 5ft (1.5m) of metal surfaces if each metal surface is permanently connected (bonded) by a minimum ground wire.

  5. DANGER: Risk of Electrical Shock. Do not permit any electrical appliance such as a light, telephone, radio, television, etc. within 5ft (1.5m) of a spa unless such appliances are installed and built-in by the manufacturer.

  6. ELECTRICAL SUPPLY: The electrical supply for this product must include a suitably rated switch or circuit breaker to open all ungrounded supply conductors to comply with the national electrical standards. This disconnect must be readily accessible and visible to the spa occupant but installed at least 5ft (1.5m) from the spa water.

  7. WARNING: To reduce the risk of injury:

    • The water in the spa should never exceed 40°C (104°F). Water temperature between 38°C (100°F) and 40°C (104°) is considered safe for a healthy adult. Lower water temperatures are recommended for young children and when the spa use exceeds 10 minutes.
    • Since excessive water temperatures have a high potential for causing fetal damage during early months of pregnancy, pregnant women should limit spa water temperatures to 38°C (100°F)
    • Before entering a spa, the user should measure the water temperature with an accurate thermometer since the tolerance of water temperature regulating devices varies.
    • The use of alcohol, drugs, or medication before or during spa use may lead to unconsciousness with the possibility of drowning.
    • Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa.
    • Persons using medication should consult a physician before using a spa since some medication may induce drowsiness while other medication may affect heart rate, blood pressure, and circulation.
  8. AUDIO/VIDEO EQUIPMENT WARNINGS (Optional equipment based on model)
    CAUTION : Risk of Electrical Shock. Do not leave compartment door open.

  9. CAUTION : Risk of Electrical Shock. Replace components only with identical components.

  10. WARNING : Prevent Electrocution. Do not connect any auxiliary components (for example cable, additional speakers, headphones, additional audio/video components, etc.) to system.

  11. CAUTION: Risk of Electrical Shock. Do not service this product yourself as opening or removing audio covers may expose you to dangerous voltage or other risk of injury. Refer all servicing to qualified service personnel.

  12. CAUTION : Risk of Electrical Shock. When the power supply connections or power supply cord(s) are damaged; if water is entering the audio / video compartment or any electrical equipment compartment area; if the protective shields or barriers are showing signs of deterioration; or if there are signs of other potential damage to the unit, turn off the unit and refer the servicing to a qualified service personnel.

  13. This unit should be subject to periodic routine maintenance (for example, once every 3 months) to make sure that the unit is operating properly.

  14. CAUTION: Do not operate audio video controls while inside the spa

  15. Installation of the spa for other than a residential dwelling will result in voiding the manufacturer’s warranty.

  16. Do not bring any object into the spa that could damage the spa shell.

  17. Never insert any object into any opening.

  18. WARNING: Do not sit on the spa cover or place objects on it.

  19. Remove any water or debris that may collect on the spa cover.

  20. WARNING: Do not use the spa immediately after strenuous exercise.

  21. If you feel pain or dizziness at any time while using the spa, discontinue use and contact a physician.

  22. WARNING: To reduce risk of injury it is especially important that persons with pre-existing health conditions or problems such as obesity, heart disease, high or low blood pressure, circulatory problems, pregnancy or diabetes consult their doctor before using the spa.

  23. WARNING: Observe reasonable time limits when using the spa. Long exposures at high temperatures can cause high body temperatures. Symptoms may include dizziness, nausea, fainting, drowsiness, and reduced awareness. These effects could possibly result in drowning.

  24. WARNING: The spa jets produce a stream of water with relatively high pressure. Prolonged exposure of localized area of the body may cause bruises to the skin.

  25. IMPORTANT: The included warning sign must be posted where all users of the spa can see and read it.

  26. WARNING: To avoid risk of drowning. The spa cover should be in place and properly latched when spa is not in use.

  27. IMPORTANT: Read and understand the warnings on the spa cover.

  28. Proper water chemistry is necessary to maintain the water and prevent possible damage to spa components.

WARNING

REDUCE THE RISK OF ELECTROCUTION

  1. Never place an electric appliance within 5ft (1.5m) of spa.

REDUCE THE RISK OF CHILDREN DROWNING

  1. Supervise children at all times.
  2. Attach and lock down spa cover after each use.

REDUCE THE RISK OF OVERHEATING

  1. Check with a doctor before use if pregnant, diabetic, in poor health, or under medical care.
  2. Exit immediately if uncomfortable, dizzy, or sleepy. Spa heat can cause hyperthermia and unconsciousness.
  3. Spa heat in conjunction with alcohol, drugs, or medication can cause unconsciousness.

WHEN PREGNANT; soaking in hot water for long periods can lead to pregnancy concerns. Measure water temperature before entering.

  1. Do not enter spa if water is hotter than 100ºF (38ºC).
  2. Do not stay in spa for longer than 10 minutes.

QUICKSTART GUIDE

  • Make sure to register your warranty at canadianspacompany.com/warranty

  • Your spa comes ready to be plugged in as 120V
    Note: If you would like to install your spa as 240V, please work with a licensed electrician to complete the work needed prior to filling your spa

  • Remove filter cover and insert hose in opening to fill the spa through the filter housing

  • Once the hot tub is filled, install your new Glacier Antimicrobial Filter Set. Make sure not to over tighten
    Note : Fill to halfway up the front of the filter housing

  • CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa- \(2\)Plug the GFCI into a dedicated, 15 amp outlet and follow the start up instructions on page 10 of this manual
    Note: You must allow the spa to run through its startup cycle before adjusting any pump or heater settings (5 to 10 minutes)

  • Follow our Spa Chemical Startup Guide instructions to balance your water

  • The water will take 24-48 hours for 120V to reach full temperature

  • Sit back and relax in your brand new spa!CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa- \(3\)

INSTALLATION

  • WINTER INSTALL
    Do NOT proceed with installing your hot tub in freezing temperatures! In colder temperatures please make sure to place a space heater inside the cabinet immediately after delivery for 24 to 48 hours before installation to prevent startup issues. Please ensure that the space heater is positioned to not directly face the spa’s pipes and set to the lowest heat and fan setting.

  • LICENSED ELECTRICIAN
    A licensed electrician can install the wiring by drilling a hole into any panel and terminating the connection at the control pack. This step is not required for a 120V Plug & Play spa.

  • PROPER SPA BASE
    All hot tubs must be placed on a proper base that is reinforced for the weight of the hot tub, water and people who may be within the hot tub at any given time. This base must be flat and come in contact with the entire base of the spa. We recommend a base that can support at least 150 pounds per square foot such as a 4-6 inches poured concrete pad.

  • ATTACH SPA COVER
    Lay cover onto hot tub, pulling the cover skirt down around the perimeter of the spa. Pull down the locking, adjustable straps and secure to cabinet panels with the included mounting hardware. Always lock your cover when the spa is unattended. Do NOT walk or sit on spa cover.

GFCI TROUBLESHOOTING (240V ONLY)
Keep in mind that the majority of 240V GFCI tripping problems can attribute to incorrect wiring. GFCI troubleshooting usually finds the problem

REFER TO DIAGRAM ON NEXT PAGE

IF CORRECT WIRING IS VERIFIED

  • IMPORTANT: All electrical installation work must be performed by a qualified electrician and must conform to local codes
  • Check to see if the proper sized GFCI is installed.
  • Be sure the GFCI is rated for more amperage than the system will draw.
  • For a 240V system, the GFCI must include a load neutral out.
  • NOTE : If the white load neutral wire is routed from the GFCI neutral bar directly to TB1 in the system box, then the GFCI will trip when a 120V device is activated. This is the most common reason if your hot tub is tripping immediately.
  • If the wiring is correct and the GFCI will not reset, then unplug the heater and try to reset the GFCI.
  • If the GFCI trips again, then unplug the pump and reset the GFCI. If the GFCI continues to trip, then do the same procedure for the ozone generator.
  • If the GFCI stops tripping after you unplugged one of the spa’s components, turn off the power to the spa then plug in each component except the one that tripped the GFCI.
  • Power up the system. If the GFCI no longer trips, then you have correctly identified the problem.
  • Repair or replace the component as instructed by the spa manufacturer.
  • If everything looks to be in perfect working order, then the GFCI may be defective.

WARNING: THE OWNER SHOULD TEST AND RESET THE GFCI ON A REGULAR BASIS TO VERIFY ITS FUNCTION

FOR MORE HELP GUIDES VISIT US AT: support.canadianspacompany.com 1-877-909-7727

240V GFCI Electrical Installation

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(6\)

BLACK ICE SERIES FEATURE FUNCTIONS

  1. Air Control
  2. Suction Intake
  3. Filter Housing
  4. Controls (topside)

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(7\)

SUCTION INTAKE
This suction intake brings in water from the bottom of the tub for maximum efficiency. Please make sure these suctions are always clear and cleaned whenever the spa is drained.

AIR CONTROL VALVE
Open and close this valve to inject air bubbles into the jet stream. The warm air from inside the cabinet is mixed with the water to help maximize the hydrotherapy experience!
Note: It is recommended that Air Control Valve(s) are left in open position when the spa is not in use in SUMMER months.
It is recommended that Air Control Valve(s) are left in closed position when the spa is not not in use in WINTER months.

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(9\)

FILTER HOUSING
This is where you will fill your hot tub with water as well as where your filter is located. We recommend changing your filter every 120 days for maximum cleanliness and chemical balance

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(10\)

TOPSIDE CONTROLS
The topside is the control centre where you can program any of the electrical functions for your revitalizing experience!

JETS
Our jets offer massage or directional styles! The directional style can target specific muscles for a precise massage where the massage style jet offers a circular and gentle massage. All jets are interchangeable and adjustable! Swap them around and turn them on and off to customize your spa to your satisfaction!

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(12\)

FOR MORE HELP GUIDES VISIT US AT: support.canadianspacompany.com 1-877-909-7727

EQUIPMENT LOCATIONS

  1. Pump(s)
  2. Control Pack & Heater 5
  3. Drain
  4. Ozone Generator
  5. Electrical*
    (Designated electrical panel)

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(14\)

PUMPS
With up to 400% more hydro massage configurations, Canadian Spa Company’s multi-speed pumps give you endless combinations of jet speeds and power. From relaxation to aquatic exercise to marathon training, our pumps can really do it all.

CONTROL PACK & HEATER
Our control pack software design incorporates patented technology using a microprocessor to intelligently monitor the hot tub water temperature and detect a runaway pump or stuck relays.

DRAIN
Twist and pull out the drain valve to access the built drain and attach your garden hose for better convenience. We recommend that you change your water seasonally.

OZONE GENERATOR
When ozone is injected into the hot tub water, it helps to sanitize the water by reducing the amount of chemicals needed. The ozone generator will automatically run during the filtration cycle within your spa.

**ELECTRICAL***
Plug and play models have designated electrical panels so please keep this in mind when placing your tub in its location. All 240V hot tubs allow you to choose which panel you would like to drill a hole into for your wiring to pass through.

FIND US ON YOUTUBE
Subscribe to our YouTube Channel for spa tips and tricks, including installation instruction, part replacement how-to videos and more! @canadianspacompanyNA

FOR MORE HELP GUIDES VISIT US AT: support.canadianspacompany.com 1-877-909-7727

CONTROL CENTRE GUIDE

YOUR CONTROL CENTRE

  • A – Heat: Indicates that the heater is on
  • B – Ready Mode: Set temperature will be maintained at all times (Recommended for Winter months)
  • C – Rest Mode: Heater will only run during filtration cycles (Recommended for Summer months)
  • D – Light: Multiple colour choices for your custom experience
  • E – Cleanup Cycle: Pump will run 30 min after spa use to filter and clean spa for 30 min
  • F – Jets 1: Pump 1 is on Note: longer lines for high speed
  • G – Jets 2: Pump 2 is on Note: short lines for low speed
  • H – Temperature Range: Temperature can be set between 80°F and 104°F
  • I – SET: Appears when changing settings
  • J – Filter Cycle: Indicates spa is running the filtration cycle

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(22\)

START UP SEQUENCE

  • When power is applied to the spa, the first messages will be the version number of the system

  • Make sure the voltage shown on your screen matches the electrical voltage of the hot tub (120V OR 240V)

  • Spa will attempt to “Prime” itself, press “TEMP UP” to bypass
    Note : Do NOT press “pumps” button at this time.

  • Pump 1 will then run on low speed to read current temperature. It will then start to heat up to the set temperature.

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(23\)

Note: TOO COLD message may occur if the initial water is too cold. Pump will continue to run until temperature reaches 45°F at which point the heater will turn on

SETTING THE TEMPERATURE

  • Pressing the “TEMP UP” button or the “TEMP DOWN” button will cause the current set temperature to flash
  • Pressing the “TEMP UP” button or the “TEMP DOWN” button will cause the current set temperature to flash
  • When the flashing stops, the temperature is set and will show the current temperature of the water
  • Once temp is set, heat icon will appear in the bottom left of the screen, flashing. When this icon stops flashing, the heater is on
  • Note: Jets 1 low speed will continue to run until the set temp is reached

CANADIAN-SPA-MANITOBA-SPA-4-Person-Portable-Patio-Spa-
\(24\)

TURN ON THE LED LIGHTS

  • Press “LIGHT” button to activate lights
  • Press “LIGHT” button repeatedly until desired light setting is active

TURN ON THE PUMPS

  • Press “JETS 1” button for pump 1 low speed to turn on. Press “JETS 2” button to activate pump 2 (if available)
  • Press “JETS 1” button or “JETS 2” button a second time for high speed (if available)

CHANGE THE SPA HEATING MODE(READY/REST)

Press the “MENU” button until your screen displays MODE
Press the “TEMP UP” or “TEMP DOWN” button to select Readyor Rest Mode then press “MENU” again to complete action
Note: It is recommended to leave the spa in READY mode

Ready Mode
Spa will automatically run the low speed of the pump every 30 minutes to check the current water’s temperature and start heat-ing if required until the set temperature has been reached. This mode is highly recommended during winter time to avoid any freezing than can result in damages to the Spa.

Rest Mode
Spa will only heat during the Filtration cycles. If they are set for 2 hours, then the pump will only run during that period of time unless you manually activate the jets.

SET THE FILTER DURATION (IN HOURS)

  • Press “MENU” button until your screen flashes FLTR
  • Press “TEMP UP” or “TEMP DOWN” button to set the number of hours you would like your filtration cycle to run every 12 hours. Press “MENU” again to complete action.
    Note: 2:00 means the spa would filter for a total of 4 hours per day (recommended)

Note: this is only a reminder notice. The spa does not monitor chemicals or filters.

FLIP/INVERT THE DISPLAY
Press “MENU” button until your screen flashes FLIP. Press “TEMP UP” or “TEMP DOWN” button to set which orientation you would like for the screen to display. Press “MENU” again to complete action

SPA CHEMICAL STARTUP GUIDE

AVAILABLE CHEMICALS
Chlorine Granules, Alkalinity Booster, pH Up, pH Down, Spa Shock, Spa Clear, Foam Free, Stain & Scale Control, Spa Flush, Test Strips
Note: Chemicals should be stored in a cool, dry place.

USING CHEMICALS
Start with testing your water
then balance your chemicals in the following order: Alkalinity, pH, Chlorine

Use 80% less chlorine with our Glacier AO3P system!

Chemical Kits Available

MAINTENANCE SCHEDULE

REMINDER: Your spa must be winterized if you are shutting it down for the winter

FOR MORE HELP GUIDES VISIT US AT: support.canadianspacompany.com 1-877-909-7727

SPA WATER TEST APP By Canadian Spa Company

  1. Dip your test strip into your spa water
  2. Select the colours shown on the test strip into the “Water Test Center” screen of the app
  3. Instantly you will have a custom guide to take care of your spa water!

WARRANTY INFO

NEED ASSISTANCE?
WE’RE HERE TO HELP

**NOTE*** WE REQUIRE THE FOLLOWING INFO WHEN CONTACTING US:

  • First/Last Name Email Address
  • Ex. Bob Brown Ex. Bob@gmail.com
  • Phone Number
  • Ex. 123-123-2345
  • Brief Description of Issue
  • Ex. Jets not working
  1. Register your warranty at: canadianspacompany.com/warranty
  2. Check our support page for additional assistance: support.canadianspacompany.com
  3. Create a service ticket at: canadianspacompany.ca/ticket
  4. Give us a call. Multiple languages supported – CA: 1-877-909-7727 | US: 1-844-879-7727
  5. Email us at: service@anadianspacompany.com

LIMITED WARRANTY

Structural Warranty : Canadian Spa Co. warrants structure of the spa shell against water loss due to structural failure for a period of year(s) from the date of purchase by the original owner. If in Canadian Spa Co. opinion, structure proves to be defective, Canadian Spa Co. will repair or, at its discretion, replace the defective structure without charge to the customer.
Surface Warranty: Canadian Spa Co. warrants the acrylic finish against defects in material and workmanship and specifically against blistering, cracking or delamination for the period of
year(s) from the original purchase date to the original purchaser. If, in Canadian Spa Co. opinion, the surface proves to be defective during this period, Canadian Spa Co. will repair or, at its option, replace the defective spa shell without charge to the customer.
Equipment/Plumbing Warranty : Canadian Spa Co. warrants the functional equipment and plumbing of the spa remain free from defects in material and workmanship for a period of *year(s) from the date of purchase by the original purchaser.

Acrylic Portable Spas:
Structure: 5 years
Surface: 1 year
Equipment/plumbing: 1 year
Floor models purchased from an authorized retailer: 1 year parts replacement warranty

Acrylic Non-Portable Spas:
Structure: 10 years
Surface: 2 years
Equipment/plumbing: 2 years
Floor models purchased from an authorized retailer: 2 year parts replacement warranty

Extent of Warranty: This Limited Warranty applies to spas manufactured
after January 1, 2024 and sold by authorized Canadian Spa Co. dealers to residential retail customers. This Limited Warranty is given only to the first retail purchaser and terminates upon transfer of ownership. No warranty is provided on any dealer installed accessories. Cost of installation, removal and/or shipping of the spa is not covered by this Limited Warranty. In the event Canadian Spa Co. deems necessary the removal of the spa to a place of repair or that the spa must be replaced, any and all costs of the spa removal and replacement; landscaping, decking, fencing and/or structure removal, alteration and/or replacement; or other costs of providing access to the spa will be for the purchaser. This Warranty applies only to spas in single family, residential installations. This Limited Warranty becomes void if the spa is placed in commercial application.

Installation:
Spa must be installed by a licensed and certified electrician for a valid manufacturer warranty. Customer is responsible for proper permits and certifications to ensure spa is installed correctly. Proof of this installation may be required by our team as requested. Failure to improperly install the spa (including use of aluminium wire or no proof of proper installation) will void the warranty.
Gazebo Warranty: Canadian Spa Co. provides a one (1) year parts only warranty for authorized purchases of gazebos through Canadian Spa Co. or their authorized dealer.

TERMS, CONDITIONS AND LIMITATIONS
Any defect or damage caused by installation, alteration or repair by anyone who is not an employee of Canadian Spa Co. or authorized service technician is not covered by the Warranty. This Warranty becomes void if the spa has been subjected to misuse, abuse, alteration or attempted alteration, repairs or attempted repairs by anyone other than an authorised Canadian Spa Co. service technician. Improper installation, improper water chemistry, improper maintenance, acts of god, or damage caused beyond the control of Canadian Spa Co. is not covered. Misuse and abuse shall include any operation of the spa other than as directed in the Canadian Spa Co. Manual. Failure to properly winterize the hot tub as per Canadian Spa Co. will cause freezing damage and is not covered under this warranty.

Examples of misuse and abuse include, without limitation

  • Damage of the spa surface caused by leaving the spa uncovered while the spa is empty of water or due to covering the spa with plastic film of any kind.
  • Damage to the spa surface caused by contact with unapproved cleaners or solvents.
  • Damage caused by the operation of the spas at water temperatures outside of the range of 2 – 40 degrees Celsius.
  • Damage caused by unapproved sanitizer such as calcium hypochlorite, tri-chlor type chlorine or any sanitizing chemical that may remain undissolved on the spa surface.
  • Damage caused by failure to provide an even base support for the spa.
  • Damage caused by freezing when new spa is not installed within a timely manner during below freezing temperatures.
  • Canadian Spa Co. spas require genuine approved Canadian Spa Co. filters, and use of non genuine approved Canadian Spa Co. filters will void the warranty.
  • Damage to spa cover or hot tub as a result of adding chemicals to the water without removing the spa cover.
  • Customer is responsible for returning faulty warranty parts, otherwise customer will be charged for the unreturned equipment.

Warranty Performance : In the event of a defect covered under the terms of
this Limited Warranty, notify your authorised Canadian Spa Co dealer and create a ticket at support.canadianspacompany.com. A Canadian Spa Co. authorised service technician will repair the spa subject to the Terms and Conditions of this Limited Warranty. Canadian Spa Co. will use genuine parts that have been factory certified to repair the hot tub. Use all reasonable means to protect the spa from further damage. Reasonable travel charges may be assessed by Canadian Spa Co. or its authorized service technician if the spa is located outside the nearest authorized service technician’s service area. This warranty covers parts ONLY and does not include travel or on-site service charges unless a Service Contract has been purchased from Canadian Spa Co. Proper access must be provided to all sides of the spa at the cost of the customer in the extent of a warranty claim. Failure to provide access will nullify the warranty.
Disclaimers: Canadian Spa Company or any of its authorized service technicians shall not be held liable for injury, inconvenience, loss of use, chemical or water damage, transportation costs, contingent liabilities or any other incidental or consequential costs, expenses or damage as result of any deficiency or alleged deficiency of the spa. In no event shall Canadian Spa Co. be liable, for any reason or cause, in excess of the amount paid for the product. No other warranties, expressed or implied, are valid. No agent, dealer, distributor, Service Company or other party is authorized to change, modify or extend the terms of this Limited Warranty in any manner whatsoever. Warranty is only valid with a proof of purchase and manufacturers plate/serial number. Cosmetic damage or normal wear and tear is not covered by the warranty.

North America Head Office:
Canadian Spa Company
1283 Cornwall Rd,
Oakville, ON L6J 7T5
T:1-877-909-7727
canadianspacompany.ca

Atlantic Office:
Canadian Spa Company
65 John Savage Ave Unit 6
Dartmouth, NS B3B 2C9
T: 1-877-909-7727
canadianspacompany.ca

Canadian Spa Company LLC:
10908 S Jordan Gateway,
South Jordan, UT 84095
T:1-844-879-7727
canadianspa.com

European Head Office:
Canadian Spa Company
Canada House
Salbrook Road, Salfords, Redhill
Surrey, RH1 5GL
T: +44 1293 824094
canadianspacompany.co.uk

Canadian Spa Company meets ISO 9001 Standards. When you purchase a hot tub from Canadian Spa Company the ISO 9001 certification assures world class excellence in manufacturing and customer service.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CANADIAN SPA User Manuals

Related Manuals