Zebronics ZEB-AIO360AW AIO Cooler User Manual

: July 12, 2024
: ZEBRONICS

Table of Contents

Thank you
Features
Specifications
CPU Socket
Fan Specs
Pump Specs
Radiator Specs
Packaging Contents
For INTEL SETUP
Connection of AIO Cooler
Mounting the AIO Cooler setup
For AMD SETUP
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Zebronics ZEB-AIO360AW AIO Cooler

Thank you

Thank you for purchasing ZEBAIO360AW / ZEB-AIO360AB AIO Cooler.
Please read this user manual carefully and keep it for future reference.

Note

Avoid the usage of this product at the high temperature and high humidity environment.
Avoid the self-disassembly of the products or it results in the voiding the product’s Warranty.
Please wipe the existing thermal compound which is present on the CPU and ins tall the Included thermal compound for obtaining the best Cooling efficiency.

To know more about Terms and conditions for warranty policy, please visit
https://zebronics.com/pages/warranty-policy

Features

360mm AIO cooler
ARGB sync
67.96 CFM Fans
Supported Intel processors:-LGA 115X/1200/1366/1700/2011/2066
Supported AMD processors:- FM3/FM2/FM1/AM2/AM2+/AM3/AM3+/AM4 /AM5
ARGB CPU Block
3 x 120mm Fans

Specifications

Form factor of the
AIO cooler : 360mm

CPU Socket

Supported CPU models

Intel : LGA 115X / 1200 / 1366 / 1700 / 2011 / 2066
AMD : FM3 / FM2 / FM1 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5

Fan Specs

No. of Cooling Fans

Included : 3 x 120mm ARGB Fans Noise level of
the fan : 15-35db Power Consumption
of the Fan : 2.16W
Rated Watts : 2.16W
MTBF of the FAN : 30000 hours
Speed of the Fan : 1800RPM (max)
Fan Dimensions : 12x12x2.5 cm (WxDxH) Type of Fan Connector
Used : 4 Pin Fan Connector RGB / ARGB Sync
Support : ARGB Support
Fan Power Connector and Connector Length : 4-Pin power Connector; Female – 49cm | Male – 56cm
Fan LED Connector and Connector Length : 3-Pin ARGB connector; Female -53.5cm | Male – 74.5cm

Pump Specs

Speed of the
Pump : 2500RPM±10%
Rated Voltage of the
Pump : 12V
Rated Current of the
Pump : 0.3A
Power Consumption
of the Pump : 3.6W
Type of Connector
Used : 3 Pin connector
MTBF of the
Pump : 30000 Hours
Tube Length of the
AIO Cooler : 38cm
Type of Pipes
Used : Braided Rubber Pipe
Diameter of the
Pipe : 1.2cm
Noise Level of the
Pump : 30db
CPU Block Power Connector and
connector length : 3-Pin Power
Connector; Length – 32cm
CPU Block LED Connector and
Connector Length : 3-Pin ARGB connector; 48cm-Female|58cm-Male

Radiator Specs

Material of the

Heat Sink : Aluminium
Material of the Heat
transfer Pipe : Copper
Dimension
of the Radiator : 40 x 12 x 3cm
Dimensions of
the CPU Block : 9 x 7.5 x 5.2cm
Product Weight : 1.5kg

Packaging Contents

A CPU Cooler

B Intel Backplate

C Intel Bracket

D AMD Bracket

E Thermal paste with spreader

G1 4 x Mounting Nuts

G2 4 x AMD Bracket Screws

G3 4 x Intel Screw Studs

G4 4 x Intel bracket screws (LGA2011)

G5 Radiator Mounting screw set.

G6 Fan Controller

For INTEL SETUP

Installation instructions:-

Applying the thermal paste:-

Step1 :- Remove the existing Thermal compound which is present on the CPU
Step2 :- Apply the included thermal paste on the CPU as per your CPU requirement
Step3 :- Using the include Thermal paste spreader, Spread the applied thermal paste evenly on the surface of the CPU.
Step4 :- Wipe of the excess Thermal compound which is present on the CPU.
Now peel of the protective cover which is present under the conductive plate of the CPU Block.

MOUNTING THE CPU BLOCK:-

For LGA 1700 / LGA 1200 /LGA115X models:-

Step1 :- Take the included Intel Mounting Backplate(B), Adjust the mounting points according to your motherboard layout.
Now align it to the rear side of the motherboard.
Step2:- Align the mounting studs(G3) to the motherboard as shown in the reference image. Fasten the Mounting studs to the Mounting bracket which is p l a c e d o n t h e r e a r s i d e o f t h e motherboard.
Step3:- Align the CPU block to the mounting studs(G3) (as shown in the reference image) .
Step4:- Align the mounting Nuts(G1) to the CPU block (as shown in the reference image) .
Step5:- Using the required tools. Fasten the Mounting nuts(G1) along with the CPU block to the mounting Studs(G3) which is placed on the motherboard.

For LGA2011 model :-

Step1:- Take the included Intel Mounting Backplate(B), adjust the mounting points according to your motherboard layout.
Now align it to the rear side of the motherboard.
Step2:- Align the CPU block to the motherboard (as shown in the reference image) .
Step3:- Align the mounting Screws(G4) to the CPU block (as shown in the reference image) .
Step4:- Using the required tools. Fasten the Mounting screws(G4) along with the CPU block to the mounting bracket(B) which is placed on the rear side of the motherboard.

Connection of AIO Cooler

Step1:- Combine the 4 – pin fan connector of the AIO cooler together and Plug the combined 4 – pin Fan connector to the System fan header of the motherboard.
Step2:- Combine the 3 – pin ARGB fan connector and 3 – pin ARGB CPU Block connector. Now plug the Combined ARGB connector to the 3 – pin connector to the ARGB header of the Motherboard.
Step:3:- Connect the Power connector CPU Block connector to the CPU Fan Header which is present on the motherboard.

Alternatively you can connect a fan controller to the connection setup which is provided in the package contents of the AIO cooler. Please follow the below connection diagram to fully utilize the fan controller.

Mounting the AIO Cooler setup

Step1:- Align the Radiator block of the AIO cooler to the mounting points of the Gaming cabinet.
Step2:- Place the mounting screws on the mounting points of the AIO cooler.
Step3:- by using the required tools, Fasten the mounting screws to the AIO cooler via the cabinet. Ensure to apply pressure evenly for optimal placement

For AMD SETUP

Combining the CPU Mounting brackets:-

Step1:- Align the AMD mounting brackets (D) To the CPU mounting points of the motherboards.

Step2:- Align the AMD mounting screws(G2). To the mounting points of the motherboard.
Step3:- Using the required tools, Fasten the AMD mounting screws into the mounting points of the motherboard via the AMD mounting plate (as shown in the Reference image).

Applying the thermal paste:-

Step1:- Remove the existing Thermal compound which is present on the CPU
Step2:- Apply the included thermal paste on the CPU as per your CPU requirement.
Step3:- Using the include Thermal paste spreader, Spread the applied thermal paste evenly on the surface of the CPU.
Step4:- Wipe of the excess Thermal compound which is present on the CPU.
Now peel of the protective cover which is present under the conductive plate of the CPU Block

Mounting CPU Block:-

Step1:- Align the intel screw stud to the mounting points of the AMD Mounting Bracket and fasten the mounting stud to the mounting points of the AMD bracket.
Step2:- Align the CPU block to the Intel screw studs. Now place the CPU block on the CPU via the mounting studs.
Step3:- Now align the Intel mounting Nuts to the Intel screw Stud and Fasten them with even pressure until the CPU block is intact

Connection of AIO Cooler

Step1:- Combine the 4 – pin fan connector of the AIO cooler together and Plug the combined 4 – pin Fan connector to the System fan header of the motherboard.
Step2:- Combine the 3 – pin ARGB fan connector and 3 – pin ARGB CPU Block connector. Now plug the Combined ARGB connector to the 3 – pin connector to the ARGB header of the Motherboard.
Step:3:- Connect the Power connector CPU Block connector to the CPU Fan Header which is present on the motherboard.

Alternatively you can connect a fan controller to the connection setup which is provided in the package contents of the AIO cooler. Please follow the below connection diagram to fully utilize the fan controller.

Mounting the AIO Cooler setup.

Step1:- Align the Radiator block of the AIO cooler to the mounting points of the Gaming cabinet.
Step2:- Place the mounting screws on the mounting points of the AIO cooler.
Step3:- by using the required tools, Fasten the mounting screws to the AIO cooler via the cabinet. Ensure to apply pressure evenly for optimal placement

Note:- Please use a compatible gaming cabinet to mount the AIO cooler.

We suggest you to visit our Below link to buy the optimal Gaming chassis for your AIO Cooler.