Bissell 3590 CleanView Upright Bagless Vacuum User Guide
- July 10, 2024
- Bissell
Table of Contents
3590 CleanView Upright Bagless Vacuum
“`html
Product Specifications:
- Model: Bissell 8990 CleanView
- Type: Bagless Upright Vacuum Cleaner
- Series: 3590/3591/8990
- Warranty: Limited comprehensive one-year warranty
Product Usage Instructions:
Safety Instructions:
It is important to follow these safety instructions when using
the Bissell 8990:
-
Keep hair, loose clothing, fingers, and all body parts away
from openings and moving parts. -
Read all instructions before using the upright vacuum.
-
Always connect to a polarized outlet and unplug when not in use
or before maintenance. -
Turn off all controls before plugging or unplugging the vacuum
cleaner. -
Use extra care when cleaning stairs.
-
Avoid picking up flammable or toxic materials.
Assembly:
Refer to the Product View section of the manual for a detailed
illustration of the vacuum cleaner’s components and how they fit
together. Follow the step-by-step instructions provided for
assembly.
Operations:
Ensure all controls are turned off before plugging in the vacuum
cleaner. Use only on dry, indoor surfaces and never outdoors or on
wet surfaces. Keep the appliance on a level surface while
operating.
Maintenance:
Regular maintenance is essential for optimal performance. Refer
to the Maintenance section of the manual for detailed instructions
on cleaning filters, emptying the dust bin, and general upkeep of
the vacuum cleaner.
Special Tools:
For specialized cleaning tasks or attachments, refer to the
Operations section of the manual for guidance on using any special
tools that come with the Bissell 8990.
FAQ – Frequently Asked Questions:
Q: Can I use the Bissell 8990 on wet surfaces?
A: No, the Bissell 8990 is designed for dry, indoor surfaces
only. Avoid using it on wet surfaces to prevent damage to the
vacuum cleaner.
Q: How often should I clean the filters?
A: It is recommended to clean the filters regularly, depending
on usage. Check the Maintenance section of the manual for specific
instructions on filter maintenance.
Q: Can children operate the Bissell 8990?
A: Children should not operate the vacuum cleaner or use it as a
toy. Close attention is necessary when used by or near children to
ensure safe operation.
“`
This Owner’s Manual is provided and hosted by Appliance Factory Parts.
Bissell 8990 Owner’s Manual
Shop genuine replacement parts for Bissell 8990
Find Your Bissell Vacuum Cleaner Parts – Select From 376 Models ——– Manual
continues below ——–
CleanViewTM
BAGLESS
USER’S GUIDE
3590/3591/8990 SERIES
3
Safety Instructions
4
Product View
4-5 Assembly
6-8 Operations / Special Tools
8-11 Maintenance
12 Troubleshooting
13 Replacement Parts
13
Consumer Services
14 Warranty
15 Reorder Form
Thanks for buying a BISSELL CleanViewTM
We’re glad you purchased a BISSELL CleanView Vacuum. Everything we know about
floor care went into the design and construction of this powerful, high-tech
home vacuuming system.
Your BISSELL CleanView is well made, and we back it with a limited
comprehensive one-year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a problem,
you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a
global leader in the design, manufacture, and service of high quality homecare
products like your BISSELL CleanView.
Thanks again, from all of us at BISSELL.
Mark J. Bissell President and Chief Executive Officer
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed, including the following:
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.
Always connect to a polarized outlet (left slot is wider than right). Unplug
from outlet when not in use and before conducting maintenance.
Turn off all controls before plugging or unplugging vacuum cleaner.
Use extra care when cleaning stairs.
Do not pick up flammable materials (lighter fluid, gasoline, kerosene, etc.)
or use in the presence of explosive liquids or vapors.
Do not pick up toxic material (chlorine
WARNING: To reduce the risk of bleach, ammonia, drain cleaner, etc.).
fire, electric shock, or injury:
Do not use vacuum cleaner in an enclosed
Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or
Do not leave vacuum cleaner unattended when it is plugged in.
Unplug from outlet when not in use and
other explosive or toxic vapors.
Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
before servicing.
Do not pick up anything that is burning
Do not use outdoors or on wet surfaces.
Do not allow children to operate vacuum cleaner or use as a toy.
Close attention is necessary when used by or near children.
or smoking, such as cigarettes, matches, or hot ashes. Do not use without filters in place. Use only on dry, indoor surfaces.
Do not use for any purpose other than
Keep appliance on a level surface.
described in this User’s Guide.
Do not carry the vacuum cleaner while it
Use only manufacturer’s recommended
is running.
attachments.
SAVE THESE INSTRUCTIONS
Do not use with damaged cord or plug. If appliance is not working as it should,
FOR FUTURE USE.
has been dropped, damaged, left outdoors,
or dropped into water, have it repaired at
an authorized service center.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or
pull cord
THIS APPLIANCE HAS A POLARIZED PLUG.
around sharp edges or corners. Do not run To reduce the risk of electric shock, this
appliance over cord. Keep cord away from appliance has a polarized plug (one blade is wider
heated surfaces.
than the other). This plug will fit in a polarized
Do not unplug by pulling on cord. To
outlet only one way. If the plug does not fit fully in
unplug, grasp the plug, not the cord.
the outlet, reverse the plug. If it still does not fit,
Do not handle vacuum cleaner or plug with contact a qualified electrician to install a proper
wet hands.
outlet. Do not change the plug in any way.
Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
This model is for household use only.
3
Hose Clip Stretch Hose
Crevice Tool
Upper Tank Knob Extension Wand
Dusting Brush
Quick Release Cord Wrap Carrying Handle
Quick Reach Handle
Hose Wand
Hose Wand Base
Power Cord
CleanView Window
Dirt Container Pre-Motor Filter
Furniture Protection Guard
Headlight
Height Adjustment Knob Power TrakTM
Power TrakTM Models Powerfoot
CAUTION:
Do not plug in your vacuum cleaner until you are familiar with all
instructions and operating procedures.
4
Handle
Power Switch Louvers
Upper Tank Post-Motor Filter Optional Hepa Media Filter (Select Models Only)
Lock ‘n SealTM Lever Handle Release Pedal
Furniture Protection Guard
How To Use This Guide
This User’s Guide has been designed to help you get the most satisfaction from
your BISSELL CleanView. You’ll find assembly and operating instructions,
safety precautions, as well as maintenance and troubleshooting instructions.
Please read this Guide thoroughly before assembling your vacuum cleaner. Pay
particular attention to the product diagram, assembly instructions, and part
names. Locate and organize all parts before assembly. Familiarize yourself
with the parts and where they fit. Following this User’s Guide will greatly
enhance your ability to get the most performance from your BISSELL CleanView
for many years.
How To Put It Together
The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.
Attach Handle To Vacuum
1. Locate the vacuum Handle and remove the screw packet taped to the base of
the Handle.
2. Stand the vacuum upright and slide the base of the Handle firmly into the
grooves at the top of the vacuum body.
3. Check to be sure the Handle is fitted to the vacuum body. If there is a
gap in front, continue to push firmly until the Handle is flush.
4. Insert one screw provided from the screw packet into the existing hole.
Tighten securely with a screwdriver.
Attach Vacuum Hose and Tools
1. Position the Hose Assembly on the back of the vacuum as shown.
2. Attach the Hose with the remaining two screws from the packet. Tighten
securely with a screwdriver.
3. Grasping the Quick Reach Handle, slide the end of the Hose Wand onto the
suction intake opening. Snap the Hose into the Hose Clip.
NOTE: The Powerfoot will not operate effectively unless the hose wand is
firmly attached to the suction intake opening.
WARNING:
Plastic film can be dangerous. To avoid danger of suffocation, keep away from
babies and children.
5
Attach Vacuum Hose and Tools Continued
4. Slide the Extension Wand and the Crevice Tool together into the storage clip as shown.
5. Slide the Dusting Brush Tool into the storage clip as shown.
How To Use Your BISSELL CleanView Handle Positions
Note:
The Floor Brush will continue to rotate while you use your vacuum for above
floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the
Powerfoot tilt forward.
Press the Handle Release Pedal with your foot to place your CleanView into one
of three cleaning positions.
1. Upright- For storage and above floor cleaning with tools.
2. Normal Cleaning- Press Handle Release Pedal once. Use for most household
floor cleaning tasks.
CAUTION:
Before using your vacuum, make sure that the Dirt Container and Upper Tank are
in locked position and that both filters (Pre-Motor and Post-Motor) are in
place. Do not operate your vacuum without these filters.
1
3. Low Cleaning- With the vacuum in normal cleaning position, press Handle Release Pedal again. Use for reaching under
2
low furniture such as tables, chairs or beds.
Power Height Adjustment
The Powerfoot/Rotating Floor Brush on your BISSELL CleanView can be adjusted
to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical
setting. If your cleaner is difficult to push, adjust to the next higher
setting.
1. Place Handle in Upright Position. 2. Turn Height Adjustment knob to
desired setting.
Lowest Setting – For bare floors. Medium Settings – For short and medium
pile carpets. Highest Setting – For plush pile carpet.
3. Place the Handle into the Normal Cleaning Position and the Powerfoot will
adjust to the setting chosen.
NOTE: You may also adjust the setting while in the Normal Cleaning Position.
6
3
Tip:
Before cleaning under low furniture, check area first for objects that might
harm the unit or block the Vacuum Hose.
Tip:
Your BISSELL CleanView features a Quick-Release Cord Wrap. To remove the Power
Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip
Power Cord from Upper and Lower Cord Wraps.
Transporting Cleaner
1. To move your cleaner from room to room, put the Handle in the upright
position, tilt the cleaner back on its rear wheels and push forward.
2. The cleaner can also be moved by using the Carrying Handle.
Carrying Handle
Special On-Board Tools
Your BISSELL CleanView is not only a powerful carpet and rug vacuum cleaner,
it’s also a versatile above floor vacuum cleaner when you select one of the
special tools.
1. Raise Handle to Upright Position. 2. Grasp the Quick Reach Handle and lift
Hose Wand to
separate from suction intake opening.
Note:
The Floor Brush will continue to rotate while you use your vacuum for above
floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the
Powerfoot tilt forward.
3. Attach tools by firmly pushing onto Vacuum Hose or Extension Wand.
Dusting Brush Tool:
Use to dust furniture, blinds, books, lamps, shelves, draperies, cushions.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
CAUTION:
The Rotating Floor Brush continues to rotate while tools are in use. To reduce
the risk of injury from moving parts, always move the cleaner with the
Carrying Handle at the back of the cleaner. Always place vacuum cleaner on
floor with Handle in Upright position when using tools. Never place your
fingers under the cleaner when it is running. Never place Powerfoot on
furniture or uneven surfaces. Do not place vacuum cleaner close enough to
objects to pull them into rotating brush.
Tip:
Hair, string and small objects can block the Vacuum Hose or Tools. Check them
occasionally for obstructions.
7
Power Cord Storage
When you are done using your BISSELL CleanView, return it to the Upright
position and store the Power Cord.
1. Turn vacuum cleaner off. 2. Unplug Power Cord by grasping the polarized
plug (NOT
the cord) and disconnect from outlet.
3. Loop Power Cord around Cord Wraps on side of vacuum cleaner.
4. Clip molded plug to Power Cord to secure.
NOTICE:
While vacuuming, certain carpets and low humidity conditions may generate
small static discharges. The discharges are entirely harmless and are not
associated in any way with the main power supply.
How to Maintain Your BISSELL CleanView
To maintain maximum cleaning performance, the following maintenance steps must
be performed:
1. Empty the Dirt Container when the dirt reaches the “Full” line on the
side.
2. Clean or replace the Pre-Motor Filter at least once a month.
3. Clean or replace the Post-Motor Filter every three months.
More frequent filter cleaning may be necessary if you are vacuuming new
carpet, fine dust, or have allergy concerns. Follow the instructions on the
following pages to perform these simple maintenance steps.
Empty Dirt Container
WARNING: To
reduce the risk of electric shock, turn Power Switch OFF and disconnect
polarized plug from electrical outlet before performing maintenance or
troubleshooting checks.
Tip:
For maximum cleaning performance, Check and clean or replace all filters as
suggested.
The Dirt Container needs to be emptied when the dirt reaches the Full line on
the side of the Container.
1. Unplug cleaner from electrical outlet.
2. Slide the Lock `n Seal Lever to the “Unlock” position.
Unlock Position
3. Grasp handle and pull the Dirt Container straight out to remove from
vacuum.
4. Empty dirt into garbage container.
5. Put the Dirt Container back in the vacuum and slide the lever to the
“Lock” position.
Note: The Dirt Container may be washed in warm water with a mild detergent.
Make sure it is completely dry before using again.
8
Full Line Lock Position
Cleaning The Upper Tank & Louvers
1. Unplug the cleaner from electrical outlet.
2. The Upper Tank area can be reached by removing the Dirt Container,
reaching underneath the Upper Tank and turning the Louver Cap to unlock. Pull
straight down to remove. Brush the dirt off the Louvers and Upper Tank area.
3. The Upper Tank and Louvers may also be wiped clean with a damp cloth.
Note: For easier access, the entire Upper Tank may be removed by turning the
knob on the back of the cleaner to unlock and pulling the entire tank straight
out.
Cleaning The Pre-Motor and Post-Motor Filters
Use only BISSELL Replacement Filters in your BISSELL CleanView.
Pre-Motor Filter
203-2056
Post-Motor Filter
203-1009
HEPA Media Post-Motor Filter 32076 (Select Models Only)
1. Unplug the cleaner from electrical outlet.
2. The Pre-Motor Filter protects the motor from dirt particles. It is located in the slide out tray underneath the Dirt Container. If the filter becomes dirty, pull out the tray, lift out the filter and clean.
Pre-Motor
3. The Post-Motor Filter assists in the filtration process to return clean air to the room. It is located behind the door
Filter
on the side of the cleaner. If the filter becomes dirty,
open the door, remove the filter and clean.
Note: Select Models come with a white, pleated HEPA Media Filter. This filter is not washable and must be replaced.
4. The standard filters may be hand washed in cold water with mild detergent. Rinse well and air dry thoroughly before replacing.
WARNING:
Do Not operate cleaner with damp or wet filters or without all filters in
place.
Post-Motor Filter
WARNING:
To reduce the risk of injury from moving parts, turn off vacuum cleaner and
disconnect Power Plug from electrical outlet.
9
Check Rotating Floor Brush and Drive Belt
You should check your vacuum cleaner’s Rotating Floor Brush and Drive Belt
regularly for wear or damage. You should also clean the brush and brush ends
of strings, hair, and carpet fibers. These can wrap around the brush and
hamper its ability to effectively clean your carpet. Also remove any debris
that has accumulated under the brush cover.
1. Unplug cleaner from electrical outlet.
2. Place handle in Low position and turn vacuum cleaner over so bottom side
is up.
Brush Cover
3. Remove the four screws as shown with a Phillips head screwdriver. Lift the
Brush Cover off.
Note: The Power Trak models have an additional screw which needs to be
removed. See the 2nd Illustration.
4. Grasp Rotating Floor Brush at both ends and lift. 5. Clean strings, hair
and other debris from Rotating Floor
Brush, paying particular attention to brush ends.
Power Trak models only
6. Clean strings, hair and other debris from Motor Pulley and Drive Belt areas.
7. Check Drive Belt carefully for wear, cuts or stressed areas. Motor Pulley
8. Check Air Passageway for obstructions. Remove debris
from this area.
Replace Drive Belt
Air Passageway
Use only BISSELL Style 7 Replacement Belts (#32074) in your BISSELL CleanView.
1. Unplug cleaner from electrical outlet.
2. With Rotating Floor Brush removed from vacuum cleaner (Steps 1-4 of check
Rotating Floor Brush and Drive Belt), grasp old Drive Belt and remove from
Motor Pulley. Discard old Drive Belt.
3. Place new Drive Belt over Motor Pulley and stretch other end over Rotating Floor Brush in the space between the bristles.
4. Place ends of Rotating Floor Brush down into slots on sides as shown.
5. Turn Rotating Floor Brush by hand several times in the direction of Motor Pulley. If properly installed, Drive Belt will center itself on Rotating Brush crown.
10
6. Reposition Brush Cover and screws. Tighten screws securely.
Replace Lightbulb
Use only BISSELL Replacement Bulb (#203-1007) in your BISSELL CleanView.
1. Unplug cleaner from electrical outlet 2. Using a screwdriver, remove the
two screws as shown and lift off the lens. 3. Remove the bulb from the socket
by pushing in gently and turning it
counterclockwise. Install the new bulb by pushing it gently into the socket
and turning clockwise.
4. Reposition lens and secure with the two screws.
Clearing Clogs
Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you
notice a change in the sound of the motor or a reduction in the spinning
action, check for clogs.
1. Unplug cleaner from electrical outlet.
2. Empty Dirt Container.
3. Check Upper Tank for build up or clogs.
4. Remove the Upper Tank and check the suction inlet for a clog. 5. Grasp the
Quick Reach Handle and lift Hose Wand to separate from
the suction opening. Check for a clog in the Base, the Wand or the Hose.
6. Remove the screw attaching the Hose Wand Base to the vacuum. Straighten
the Hose Wand Base and unclog with long, narrow object.
7. If the clog persists, follow the instructions for Checking the Rotating
Floor Brush on page 10 and inspect the Air Passageway for obstructions.
Thermal Protector
An internal thermal protector has been designed into your cleaner to protect
it from overheating. When the thermal protector activates, the cleaner will
stop running. If this happens, proceed as follows:
1. Turn the cleaner OFF and unplug from electrical outlet. 2. Check the Upper
Tank area, Pre-Motor Filter and
Post-Motor Filter for dirt accumulation.
3. Refer to the “Clearing Clogs” section.
4. When cleaner is unplugged and motor cools for approximately 30 minutes,
the thermal protector automatically resets and cleaning may continue. If the
thermal protector continues to activate after following the above steps, your
cleaner may need servicing. Call BISSELL Consumer Services, or visit the
website.
Suction Inlet
Air Passageway 11
Troubleshooting
Vacuum cleaner won’t run.
Possible Causes
1 Power cord not firmly plugged in 2 Blown household fuse or breaker 3 Thermal
protector activated
Vacuum cleaner won’t pick up dirt.
Possible Causes
1 Incorrect Height Adjustment 2 Hose not attached to suction opening
3 Crack or hole in Hose 4 Broken or worn Drive Belt 5 Rotating Floor Brush
bristles worn 6 Rotating Floor Brush jammed 7 Clog in vacuum 8 Dirt Container
full 9 Dirt Container or Upper Tank not installed properly 10 Filters are
dirty
Tools won’t pick up dirt.
Possible Cause
1 Crack or hole in Hose 2 Clog in vacuum 3 Dirt Container full 4 Dirt
Container or Upper Tank not installed properly 5 Filters are dirty
Vacuum cleaner is difficult to push.
Possible Causes
1 Incorrect Height Adjustment
Visible dirt escaping from cleaner.
Possible Causes
1 Dirt Container full 2 Filters missing or installed incorrectly
3 Dirt Container installed incorrectly
Remedies
1 Check electrical plug 2 Check/replace fuse – Reset breaker 3 Allow cleaner
to cool for 30 minutes, see pg. 12
Remedies
1 Adjust Powerfoot to correct height setting 2 Grasp Quick Reach Handle and
firmly push Hose
Wand onto the suction opening 3 Check Hose and replace if needed 4 Replace
Drive Belt, see pg. 10-11 5 Replace brush 6 Remove brush and clean debris from
brush ends 7 Follow instructions on pg. 12 for clearing clogs 8 Empty Dirt
Container 9 Position correctly and lock in place 10 Check and clean Pre-Motor
and
Post-Motor Filters
Remedies
1 Check Hose and replace if needed 2 Follow instructions on pg. 12 for
clearing clogs 3 Empty Dirt Container 4 Position correctly and lock in place 5
Check and clean Pre-Motor and
Post-Motor Filters
Remedies
1 Adjust Powerfoot to correct height setting
Remedies
1 Empty Dirt Container 2 Check Pre-Motor and Post-Motor
Filters for correct installation 3 Pull out and re-insert Dirt Container
correctly
WARNING:
To reduce the risk of injury from moving parts and/ or electrical shock, turn
Power Switch OFF and disconnect polarized plug from electrical outlet before
performing troubleshooting checks.
If suggested solutions do not correct the problem, call:
BISSELL Consumer Services
Monday – Friday 8 a.m. — 9 p.m. ET
Saturday
9 a.m. — 5 p.m. ET
12
or visit the BISSELL website – www.bissell.com
Replacement Parts BISSELL CleanView Series
You may purchase replacement parts from your retailer, by using the order
form in this User’s Guide, by calling BISSELL Consumer Services or by
1
2
visiting our website. To locate a retailer near you, or to place an order using
Visa, MasterCard, Discover or American Express, call
BISSELL Consumer Services
Monday – Friday Saturday
8 a.m. — 9 p.m. ET 9 a.m. — 5 p.m. ET
3
4
Or visit our Website – www.bissell.com
Item Part No. Part Name
1
32074
Style 7 Drive Belt (2-Pack)
2
203-1007 Headlight Bulb
5
6/7
3
203-1063 Crevice Tool
4
203-1083 Dusting Brush
5
203-1084 Extension Wand
6
203-1036 Vacuum Hose
7
203-2012 Vacuum Hose Clear (Select Models Only)
8
203-1016 Brush Roll
8
9
9
203-2013 Power Trak Brush Roll (Select Models Only)
10
203-2056 Pre-Motor Filter
11
203-1009 Post-Motor Filter
12
32076
HEPA Media Post-Motor Filter (Select Models Only)
10
11
BISSELL Consumer Services
For information about repairs or replacement parts, or
questions about your warranty, call:
BISSELL Consumer Services
Monday – Friday
8 a.m. — 9 p.m. ET
Saturday
9 a.m. — 5 p.m. ET
Or write:
BISSELL Homecare, Inc. PO Box 3606 Grand Rapids, MI 49501 ATTN: Consumer
Services
Or visit the BISSELL website – www.bissell.com
When contacting BISSELL, have model number of unit available. Please record your Model Number: ___ Please record your Purchase Date:
NOTE: Please keep your original sales receipt. It is your warranty.
12
©2002 BISSELL Homecare, Inc Grand Rapids, Michigan All rights reserved. Printed in Korea. Part Number 010-6045 Rev 9/02
Visit our website at:
www.bissell.com
13
Warranty
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. If you need additional instruction
regarding this warranty or have questions regarding what it may cover, please
contact BISSELL Consumer Services by E-mail, telephone, or regular mail as
described below.
Limited One Year Warranty
Subject to the EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of
the product BISSELL Homecare, Inc. will repair or replace (with new or
remanufactured components or products), at BISSELL’s option, free of charge
from the date of purchase by the original purchaser, for one year any
defective or malfunctioning part.
See information below on “If your BISSELL product should require service”.
This warranty applies to product used for personal, and not commercial or
rental service. This warranty does not apply to fans or routine maintenance
components such as filters, belts, or brushes. Damage or malfunction caused by
negligence, abuse, neglect, unauthorized repair, or any other use not in
accordance with the User’s Guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service
Center in your area. If you need information about repairs or replacement
parts, or if you have questions about your warranty, contact BISSELL Consumer
Services.
Website or E-mail: www.bissell.com Use the “Customer Services” tab.
Or Call: BISSELL Consumer Services
1-800-237-7691 Monday – Friday 8 a.m. –
9 p.m. ET Saturday 9 a.m. – 5 p.m. ET
Or write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids MI 49501 ATTN:
Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY
WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS
DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
14
BISSELL CleanView Order Form
1 Order Information
Item Part No.
1
32074
2
203-1007
3
203-1063
4
203-1083
5
203-1084
6
203-1036
7
203-2012
8
203-1016
9
203-2013
10
203-2056
11
203-1009
12
32076
Part Name
Style 7 Drive Belt (2 pack) Headlight Bulb Crevice Tool Dusting Brush
Extension Wand Vacuum Hose Vacuum Hose Clear (Select Models Only) Brush Roll
Power Trak Brush Roll (Select Models Only) Pre-Motor Filter Post-Motor Filter
HEPA Media Post-Motor Filter (Select Models Only)
Qty. x Unit = Price
__ $2.99 __ __ $1.95 __ __ $2.99 __ __ $1.70
__ __ $1.50 __ __ $8.50 __
$9.50 __ $15.95 __
$17.95 __ $1.50 __ $2.95 __
__ $9.99 __
3
Total
SUB TOTAL __
Shipping Information
Ship To ____
Address ____
City ____
State ____ Zip____
Shipping and Handling .01 to $4.99 = $2.95
$5.00 to $19.99 = $4.95 $20.00 to $99.99 = $7.95 $100.00 to $229.99 = $13.95
$230.00 and up = $25.95 UPS 2nd Day = above shipping amount + $5.75 UPS Next
Day = above shipping amount + $19.95
Sales tax based on delivery address
AR, AZ, CA, FL, GA, IL, KS, MA, MD, MI, MN, MO, NC, NE, NJ, NY, OH, PA, TN,
TX, UT and WA residents add applicable sales tax.
Price applicable in continental United States only Price subject to change
without notice
Shipping
Sales Tax __ Order Total __
2 Billing Information
Charge:
Mastercard Visa American Express
Enclosed in your envelope check or money order payable to BISSELL Homecare, Inc. (No cash or stamps please)
Discover
Telephone ____
Account Number
(include all digits)
Card Expires
Month Year
Signature __
Or visit BISSELL website – www.bissell.com
MAIL REORDER FORM TO:
BISSELL Homecare Inc.
Mail Order Department PO Box 3606 Grand Rapids MI 49501
OR FAX TO:
15
References
- Nýtt á skrá
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Bissell Vacuum Cleaner Parts - Select From 377 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>