DUCABIKE BAC10 Moto Guzzi Stelvio Kickstand Base Installation Guide

Table of Contents

Ensure the motorcycle is on a stable surface and turned off.
Identify the components in the installation kit:
- 1 x BAC10-C base cavalletto
- 2 x TPSE035 VITE M5x12 screws
- 3 x RND034 SV. D5,3 nuts
- 4 x RND011 ROND. D6 washers
Use the provided tools and thread locker for assembly.
Follow the step-by-step instructions in the manual for proper installation.
For safety reasons, it is recommended to have a specialized mechanic install the kickstand base.

Q: Can I install the kickstand base myself?
- A: While it is possible to install it yourself, it is recommended to have a specialized mechanic do the installation for safety reasons.
Q: What torque should be applied to the screws during installation?
- A: Apply 6 Nm of torque using the provided tools and threadlocker for secure assembly.
Q: Are additional tools required for installation?
- A: No, all necessary tools are included in the kit for proper installation.

DBK recommends having the installation done by a specialized mechanic MADE IN ITALY

Terms of use, necessary precautions, and disclaimer:

All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only in private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation.
Customers buying the above-mentioned products, who intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.

Read and follow these instructions carefully, an essential part of the product.
We recommend that the installation and mounting of the parts be done by qualified mechanics or specialized mechanical stores.
The company takes no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation.
For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.

All DBK products require regular inspection and maintenance.
The greater their use, the greater the frequency of checks must be. If you find any parts missing, damaged, worn, or with an irregular appearance, immediately consult your DBK dealer before using the motorcycle.
In any case, never try to repair or modify DBK products or their parts, or replace them with original DBK components. DBK products may not be compatible with your motorcycle.
Do not use chemical products such as alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.