DUCABIKE CCDV08 F V4 Clutch Cover Transformation Kit Installation Guide
- June 4, 2024
- DUCABIKE
Table of Contents
DUCABIKE CCDV08 F V4 Clutch Cover Transformation Kit
art. CCDVO8
Ducabike consiglia di far effetuare il montaggio da un meccanico specializzato
Ducabike recommends to have the installation done by a specialized mechanic.
MADE IN ITALY
OVERVIEW
- CCDV08-GC 1
- STAO3 1
- Vite/screw TCElI M6x25 8
- Vite/screw TCEl M6x20 16
- Vite/screw TBEI M5x14 3
- Dado/Nut Au FL M5 1
- OEM
Attention:
Before tightening the screw, center the hole with the rear brake oil support.
STEPS
Step 1
Completely remove oil, through the plug under the engine.
Step 2
Unscrew the screw with the washer from oem carter,see Note A.
Step 3
Unscrew the oem carter screws and remove it.
Step 4
Remove the old seal paste by cleaning the surface.
Step 5
Reuse the 0-ring as shown in Note B and lubricate the parts before placing the
new carter, see NoteC and Note D.
Step 6
Place the new carter using Ducati’s original gasket paste (ThreeBond),taking
care not to move the 2 standard bushings from their position.
Terms of use, necessary precautions and disclaimer
All Ducabike-Performance Technology products made and/or sold, dealing with
the purchase Agreement, are designed and meant fo be used only in private
roads closed to public traffic or for racing use in closed fracks, they are
not therefore provided with homologation.
Customers buying the above-mentioned products, which intend to Use them on a
public street, must require in advance the homologation (or an
Updated registration) fo their country’s competent authority, otherwise, they
knowledge fo be in breach of the law of the country in which they are using
the above-mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor fakes no
responsibility in case of fine, penalty or damage which may occur fo the
customer and user.
Installation and mounting:
We recommend having the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company fake no responsibilty for damage Occurring fo things and/or people in case of wrong and inaccurate installation.
Cleaning and service:
Do not use chemical products such as: alkaline degreaser or acids, for they
can be harmful to the anodized surface, use only mild soaps and avoid the
utilizafion of pressure washers.