DUCABIKE PMR01 BMW Wheel Hub Protection Kit Instruction Manual
- July 10, 2024
- DUCABIKE
Table of Contents
DUCABIKE PMR01 BMW Wheel Hub Protection Kit
Product Information
Specifications:
- Product Name : Protezione Mozzo Ruota Posteriore BMW (BMW Rear Wheel Hub Protector)
- Model Number: PMR01
- Origin: Made in Italy
Product Usage Instructions
Installation Recommendations:
It is highly recommended to have the installation performed by a specialized mechanic to ensure proper fitting and functionality.
Tools Required:
- TPT08
- ROND08-C
- TRD05-C
- TIR11
- TCE081 VITE TCE M6x25 (2 pieces)
Installation Steps:
- Place O-Ring in the first designated location.
- Tighten screw 5A to 9.5 Nm.
- Then, tighten screw 5B on the opposite side.
- Use grease and threadlocker as indicated in the manual.
- Follow any additional instructions provided in the manual for a secure installation.
Maintenance Recommendations:
Regularly inspect and ensure that all fixings are tightly secured to maintain optimal performance and safety.
Additional Information:
For any installation or mounting of parts, it is advised to seek assistance from qualified mechanics or specialized mechanical stores. The company bears no responsibility for damages resulting from incorrect installations.
Avoid using harsh chemical products such as alkaline degreasers or acids, as they may damage the anodized surface. Instead, use mild soaps and refrain from using pressure washers.
FAQ
- Q: Can I install the BMW Rear Wheel Hub Protector myself?
- A: It is recommended to have the installation done by a specialized mechanic to ensure proper fitting and avoid any issues.
- Q: How often should I inspect the fixings?
- A: Periodic inspections are recommended to verify that all fixings are fully tightened. Regular checks can help maintain the product’s effectiveness and safety.
Instruction Kit/ BMW Rear Wheel Hub Protector
N/ COD/ Qt
1 – TPT08/1
2 – ROND08-C/1
3 – TRD05-C/1
4 – TIR11/1
5 – TCE081 VITE TCE M6x25/2
6 – OR016 O-RING Ø47.3/2
Tools
Note 2
WARNING: IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT ALL FIXINGS ARE FULLY TIGHTEN
DBK recommends to have the installation done by a specialized mechanic
Note 1
Att. ne: Tighten screw “5 A” first then tighten the screw “5 B” on the opposite side
Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only in private roads closed to the public traffic or for a racing use in closed tracks, they are not therefore provided with homologation.
Customers buying the above-mentioned products, which intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.
Installation and mounting:
We recommend to have the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation.
Cleaning and service:
Do not use chemical products such as : alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>