DUCABIKE BRM06 BMW Handlebar Riser Kit Installation Guide
- July 10, 2024
- DUCABIKE
Table of Contents
Kit istruzioni / Instruction Kit – Rialzo manubrio BMW R1300GS /
BMW R1300GS Handlebar Riser
art. BRM06
DBK recommends to have the installation done by a specialized mechanic
MADE IN ITALY
BRM06 BMW Handlebar Riser Kit
Note 2
WARNING: IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT
ALL FIXINGS ARE FULLY TIGHTEND
NOTE
Tighten pack coming before the screw marked number “1” then the screw marked
number “2”, use only the wrench and tighten a 18 N.m. or 14 ft/lb
Terms of use, necessary precautions and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are
designed and meant to be used only in private roads closed to the public
traffic or for a racing use in closed tracks, they are not therefore provided
with homologation.
Customers buying the above mentioned products, which intend to use them on a
public street, must require in advance the homologation (or an updated
registration) to their country’s competent authority, otherwise, they
acknowledge to be in breach of the law of the country in which they are using
the above mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor takes no
responsibility in case of fine, penalty or damage which may occur to the
customer and user.
Installation and mounting:
We recommend to have the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation.
Cleaning and service:
Do not use chemical products such as: alkaline degreaser or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>