DUCABIKE PCD02 BMW Cardan Shaft Protector Instruction Manual
- July 10, 2024
- DUCABIKE
Table of Contents
DUCABIKE PCD02 BMW Cardan Shaft Protector
Product Specifications
- Manufacturer: DBK
- Model: Cardan Shaft Protector for BMW R1300GS
- Components Included:
1. BOC023-C – 1 unit
2. TPT07 – 1 unit
3. GMN001 – 1 unit
4. TCE093 VITE TCE M6x50 – 1 unit
5. RND016 – ROND D=6 – 1 unit
6. DAD024 – DADO M6 – 1 unit
7. RND022 – ROND D12x6x3.5 – 2 units- Country of Origin: Italy
Product Usage Instructions
- Preparation: Ensure all fixings are fully tightened before installation.
- Cleaning: Degrease the seat using a solvent-free solution before inserting the protector.
- Installation: Remove OEM parts before proceeding with the installation of the Cardan Shaft Protector.
- Installation Recommendation: It is recommended to have the installation done by a specialized mechanic for accurate fitting.
- Caution: Do not use chemical products like alkaline degreasers or acids as they may harm the anodized surface. Use mild soaps and avoid pressure washers.
Frequently Asked Questions
- Q: Can I install the Cardan Shaft Protector myself?
- A: It is recommended to have the installation done by a specialized mechanic for precise fitting and to avoid any damage.
- Q: What cleaning products should I avoid using on the protector?
- A: Avoid using alkaline degreasers or acids, as they can be harmful to the anodized surface. Only use mild soaps for cleaning.
- Q: How often should I inspect the fixings?
- A: Periodic inspections are recommended to ensure all fixings are fully tightened. Check regularly for any loosening.
Product Specifications
WARNING: IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT ALL FIXINGS ARE FULLY TIGHTEND
Utensili/Tools
Parts
Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only in private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation. Customers buying the above-mentioned products, who intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.
Installation and mounting
We recommend that the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation.
Cleaning and service
Do not use chemical products such as: alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.