OPTIMUM OP-SBDIGI 7 Day Digital Time Switch Socket Box Owner’s Manual
- July 8, 2024
- optimum
Table of Contents
OPTIMUM OP-SBDIGI 7 Day Digital Time Switch Socket Box
Specifications
- Product Code: OP-SBDIGI
- Type: 7-Day Digital Time Switch Socket-Box Mounting Volt-Free Changeover Switching
- Time Format: Digital 24-hour / 7-day
- Minimum Switching Time: 1 minute
- Mounting: Surface or in-wall pattress box
- Switch Type: Volt-free changeover switch
- Resistive Rating : 16 Amperes
Product Usage Instructions
- Installation: Ensure the timer is securely mounted on a surface or in an in-wall pattress box.
- Programming: Set the desired on/off times using the digital interface. The timer supports 24-hour and 7-day programming options.
- Manual Override: In case of manual operation is needed, use the manual override feature to control the switch.
- Load Considerations: Ensure that the resistive load does not exceed 16 Amperes to prevent damage to the timer.
- Temperature: Operate the timer within the specified temperature rating to ensure optimal performance.
OP-SBDIGI IS A DIGITAL 24-HOUR / 7-DAY TIME SWITCH. MINIMUM SWITCHING TIME 1 MINUTE. THE TIMER IS SUITABLE FOR INSTALLATION ON A SURFACE OR IN-WALL PATTRESS BOX. THE TIMER CONTROLS A VOLT-FREE CHANGEOVER SWITCH, WITH A RESISTIVE RATING OF 16 AMPERES.
DIMENSIONS
- DIMENSIONS (see drawing below)
- CONNECTIONS 5 X WIRE-PROTECT SCREW TERMINALS + EARTH PARK
- WEIGHT 160g
- POWER CONSUMPTION 1vA @ 230V 50Hz
- RESISTIVE LOAD 16 AMPERES
- INDUCTIVE LOAD 4 AMPERES (cos Ø 0.6)
- MINIMUM LOAD 100mA @ 20v AC/DC
- RUNNING RESERVE 2 Months +
- TEMPERATURE RATING -20T55
- ACCURACY QUARTZ REGULATED (typically +/- 2.5 sec / day)
- MINIMUM SWITCHING 1 MINUTE
- MANUAL OVERRIDE FIX ON / TIMED / FIX OFF
TFC GROUP, TOWER HOUSE, VALE RISE, TONBRIDGE, KENT TN9 1TB
MORE INFORMATION
- Tel: 01732 351680 www.tfc-group.co.uk
- Prepared for TFC Group By:
- M. Edmonston
- Issue 1: Sept 2018 Page 1 of 1
FAQ
- Q: Can I program different schedules for each day of the week?
- A: Yes, the OP-SBDIGI supports individual programming for each day of the week, allowing for flexible scheduling.
- Q: What is the purpose of the manual override feature?
- A: The manual override feature allows users to manually control the switching operation outside of the programmed schedule.
- Q: What is the recommended resistive load for this timer?
- A: The timer is rated for a resistive load of up to 16 Amperes. Ensure not to exceed this limit to prevent damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>