optimum CS-14553 Gateway Instruction Manual
- September 6, 2022
- optimum
Table of Contents
CS-14553 Gateway
Instruction Manual
These instructions will guide you through installing or replacing a Gateway
5
New customers – Start here
If you’re a new customer with Optimum, use your phone camera to scan the QR
code on the packing slip that came with your shipment. The code will take you
to a website that will help you install and activate your new
equipment.
All other customers – please follow the instructions below to replace your equipment.
Disconnect everything from your existing equipment.| Connect the open end of
your coaxial cable to the back of the new Gateway.
Plug the Gateway power cord into the back of the device.| Plug the other end
of the power cord into an electrical outlet.
The Gateway is ready for the next step when the top 3 lights (POWER, DS/US,
ONLINE) on the front panel are solid green. This may take a few minutes.| Sign
in at optimum.net/gateway to personalize your
in-home WiFi network name, also called an SSID, and your password. Can’t
remember or don’t have an Optimum ID? Visit
optimum.net/idhelp If you’d rather use the
defaults, look at the label on the bottom of the Gateway. Note, that your
password will be listed as the “Wi-Fi Pre-Shared Key”.
To connect to the Internet, go to WiFi settings on your device. Select your
in-home WiFi network name from the list and when prompted, enter your
password. Repeat this step for all of your connected devices.| If you have an
Altice One Mini, you need to re-pair it to the Gateway. Refer to the
“Replacing an Altice One Mini” instructions at
optimum.net/guides. If not, you’re all set!
Make sure to return your old equipment. Learn how at
optimum.net/return
Optimum, the Optimum family of marks & Optimum logos are trademarks of CSC
Holdings,
LLC, a subsidiary of Altice USA,
Inc. © 2022 CSC
Holdings, LLC.
COL0722OPT1322
Once you’ve connected
and powered on your new
Gateway, call 877.851.5652 to
begin the activation process.