Caibo T10 3 In 1 Wireless Charging User Manual

Caibo T10 3 In-1 Wireless Charging

Product Specifications

• Input: 5V/3A, 9V/2.22A, 9V/3A, 12V/1.67A, 12V/2.5A, QC3.0, PD
• Mobile Output: 15W/10W/7.5W/5W
• Watch Output: 2.5W
• Earphone Output: 3W
• Input Interface: Type-C Interface
• Charging Frequency: 115-205 kHz
• Magnetic Attraction: 0.8 KG
• Product Size: 926434mm

Product Usage Instructions

Package Contents

• 1 x 3 in 1 Desktop Wireless charger
• 1 x Type-C Charging Cable
• 1 x User Manual

Functional Components

• Heat Dispatch Hole
• Mobile Phone Wireless Charging Area
• Apple Watch Wireless Charging Area
• Charging Indicator Light
• Type-C Interface Earphone Charging Area
• LED Intelligent Indicator

Use Steps

1. Connect the power supply and power up the product.
2. Place the phone/earphone/watch in the corresponding charging
   position and charge it normally.

Charging Diagram

LED Indicator

1. Power on: the light stays on for 5 seconds and turns off.
2. Standby: turn off the lights.
3. Charging: The indicator light of the corresponding device remains on for 5 seconds and goes off.
4. Full charge: turn off the lights.
5. Metal foreign object detection: Corresponding device indicator light flashing.

Applicable Devices

1. Smartphone: For non-MagSafe phones, please use an extra magnetic ring or MagSafe case to use this product. Support iPhone 12/13/14/15 series and other Qi phones.
2. Smart Watch: Apple Watch.
3. Earphone: Apple AirPods/Samsung earbuds and other Qi-compatible devices.

Caution

1. Do not oover-squeezeor collide with the equipment.
2. Avoid placing it too close to magnetic cards (ID cards, bank cards, etc.) to prevent magnetic card failure.
3. Use a 9V adapter for power supply, avoid using a 5V adapter to prevent charging interruption.

Package

• 3 in 1 Desktop Wireless charger *1
• Type-C charging cable *1
• User Manual *1

Functional component

Use steps

1. Connect the power supply and power up the product.
2.  Place the phone/earphone/  watch in thecorresponding charging position and charge it normally.

LED intelligent indicator

1. Power on the light stays on for 5 seconds and turns off
2. Standby: turn off the lights
3. Charging: The indicator light of the corresponding device remains on for 5 seconds and goes off
4. Full charge: turn off the lights
5. Metal foreign object detection: Corresponding device indicator light flashing

Charging diagram

Applicable Devices

1. extra magnetic ring or MagSafe case to use this product. Support iPhone 12/13/14/15 series and other Qi phones
2. Smart Watch: Apple Watch
3. Earphone: Apple AirPods/ Samsung earbuds and other Qi-compatible devices

Product specification

• Input: 5V/3A，9V/2.22A,9V/3A,12V/1.67A,12V/2.5A,QC3.0 ,PD
• Mobile output: 15W/10W/7.5W/5W
• Watch output: 2.5 W
• Earphone output: 3 W
• Input interface: type-C interface
• Charging frequency: 115-205 kHZ
• Magnetic attraction: 0.8 KG
• Product size: 926434mm

Caution

1. Do not over-squeeze or collide with the equipment.
2.  Please do not place it too close to the magnetic card (ID card, bank card, etc.) with a magnetic stripe or chip to avoid magnetic card failure.
3. Do not use a 5V adapter as insufficient power may cause charging interruption. Please use a 9V adapter for the power supply.

Warranty

The three guarantee periods of this product: from the purchasing date (Prevail to the customer receipt date or invoice date), provide 12-month guarantee. product surface man-made damage, accessories missed are not included in this guarantee,  repair service for the product is out of the guarantee period  or not covered by warranty, customer needs to pay the repair charge

For your rights and interests, please fill in carefully and keep it properly as a pre-maintenance voucher! Do not modify the content without authorization, otherwise it will be deemed invalid. The company reserves the final right to interpret the after-sales service  regulations of the product

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause  undesired operation

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Frequently Asked Questions

• Q: What devices are compatible with the wireless charger?
  A: The wireless charger is compatible with smartphones (including iPhone 12/13/14/15 series), Apple Watches, and earphones such as Apple Airpods and Samsung earbuds that support Qi charging.

• Q: What should I do if the charging indicator does not light up?
  A: Make sure the power supply is connected correctly, and the device is placed in the correct charging position. If the issue persists, check for any foreign objects in the charging area that may interfere with charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>