JOVISION JVS-H930E Wireless IP Camera User Guide
- June 9, 2024
- Jovision
Table of Contents
JOVISION JVS-H930E Wireless IP Camera
Open Source Software License
This product contains software whose right holders license it under the terms of the GNU General Public License, version 2 (GPLv2), version 3 (GPLv3) and/or other open source software licenses. If you want to receive the complete corresponding source code, we will provide you and any third party with the source code of the software licensed under an open source software license if you send us a written request by mail or email to the following addresses:
Jovision OSS support team Email:
opensource@jovision.com
Postal: Jovision Technology Co., Ltd. Floor 12 Building No.3, Aosheng
Square,NO.1166 Xinluo Street, Jinan, Shandong, China
detailing the name of the product and the firmware version for which you want the source code and indicating how we can contact you.
PLEASE NOTE THAT WE WILL ASK YOU TO PAY US FOR THE coSTS OF ADATA CARRIER AND THE POSTAL CHARGES TO SEND THE DATA CARRIER TO YOu.
THE AMOUNT CAN BE VARIED ACCORDING TO YOUR LOCATION AND GENIATECH OSS SUPPORT TEAM WILL NOTIFY THE EXACT CoST WHEN RECEIVING THE REQUEST.
THIS OFFER IS VALID FOR THREE YEARS FROM THE MOMENT WE DISTRIBUTED THE PRODUCT AND VALID FOR AS LONG AS WE OFFER SPARE PARTs OR CUSTOMER SUPPORT FOR THAT PRODUCT MODEL.
CHANGE THE DEFAULT PASSWORD
- Default Camera Account:
- Username: admin Password:
The default account is for first-time log-in purposes only. You should change this default password to better protect against security risks, such as the unauthorized access by others to the product that may prevent the product from functioning properly and/or lead to other undesirable consequences.
For your privacy, we strongly recommend changing the password to something of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end- user.
Download the App
Search SOovVI Int’l in App Store (for iOS) or Play Store (for Android).
Before you start:
The interfaces on iOS and Android may different, but the functions and
configuration steps are similar.
Set-up Camera Network with App
-
Power on the camera.
-
Install the SOOVVI Intl APP and register an account.
-
Tap the + icon on the right top corner to add your camera into your device list.
-
Scan the QR Code on the bottom of the camera.
- The App will prompt: Please press and hold the reset button until you hear Waiting for configuration’.
- Press and hold the Reset button using a reset pin, then the device will prompt Waiting for Configuration”
-
Tap on 1 have heard the audio prompt.
Note: Some models will not give sound prompt. Just press and hold the RESET button until the LED stops blinking. -
You will be asked to confirm your home Wi-Fi network and input password. Then tap ‘Next.
-
Place your phone screen face to the camera for scaning the QR code generated by App.
-
Tap ‘Start to Connect’ when the camera says: ‘Receive network configuration’ and then the camera will be searched and added to the device list.
Note: Some models wil not give connection confirmation, please wait about 20 seconds, thenthe device will automatically added into the list. -
Tap the device in the list to view the video streaming. For protecting user’s privacy, we recommend you to set a strong password for the device. App will prompt you to set the password when you access the device for the first time.
Note: If the camera is not connected, please check the network and the Wi-Fi password, then reset the camera and try again.
Recording on SD Card
Insert the SD card into the camera. Recording will start after the SD card has been recognized and formatted as follows.
-
Tap on ‘Settings’@when the camera is connected. Then tap Device Info’.
-
Set the recording mode to ‘Stop recording’, then tap ‘Format SD Card’.
-
After the SD card is formatted, set the recording mode to All Day Record or Alarm Record, then the recording will start.
Video Playback
Tap on ‘Playback’when the camera is connected. The App will playback the video footages recorded in the SD Card automatically.
Technical support
If you have any problems with the device, please contact the dealer that you purchased from. If your problem still can’t be resoved, please send an Email to the headquarter technical support team at: support@iovision.com
We welcome your valuable comments and suggestions on improving our products.
@2021 lovision Technoloav Co Itd AllL riahts reserved
Note: C2021 Design and Technclogy speafications Co.. are subject to change
without natioe. Under no ciraumstanoes, this document shall be reproduced,
distributod or changed partialy or wholly without formal authorizatian of
Javision Technology Ca. Lid 11009930-V10
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not instaled and used in accordance with the instructions, may cause hamful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation.. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontroled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
s2021 Jovision Technoloay Co., Ltd. AlI rights reserved.
Note: Design and specifications are subject to change without notice.
Under no circumstances, this document shall be reproduced, distributed or
changed pertially or wholly without fomal authorization of Jovision Technoogy
Co. Ltd
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>