BJCGFVH6 B09XBB2C2D Wireless Keyboard User Manual
- June 9, 2024
- BJCGFVH6
Table of Contents
BJCGFVH6 B09XBB2C2D Wireless Keyboard
IMPORTANT: Please read this manual before using the keyboard case.
Package included: instruction manual1 Wireless keyboard1 USB charging
cable*1
Product model specification
- Bluetooth Interface Standard: BLE 5.0
- 0perating Distance Available: 10 meters
- Modulation System: GFSK
- 0perating Voltage: 3.0-4.2V
- Working Current: <8mA (When the touchpad is working)
- Standby Current: <0.3mA
- Sleeping Current: <40 μ A
- Charging Current: 1 OOmN200mA (Backlight)
- Standby Time: > 100 days
- Charging Time: 2-3 hours
- Lithium Battery Capacity: 200mN400mA(Backlight)
- Sustainable Working Time: more than 50/100 hours(close the backlight
- Lithium Battery Life: 3 years
- Key Strength: 80 ± 10g
- Key Life: 5 Million Stroke
- 0perating Temperature: – 1°C+ 55°C
Getting Started Guide
Bluetooth keyboard connection steps
-
After turning the power switch to the ON position. the Bluetooth indicator, Caps lock indicators. and weak current indicator will stay on for 1 second and then off. The Bluetooth indicator will start to flash,(If not. please see “Step 2”)and the keyboard will automatically enter the device 1 pairing mode.
-
If the Bluetooth connection indicator doesnt continue to flash after turning on the keyboard, press and hold Fn+A until the blue Bluetooth indicator lights up and flashes.
-
Open and unlock your tablet and click on the “Settings” icon.
-
In the settings menu, click on the “Bluetooth” menu.
-
Turn on the Bluetooth switch and the tablet will automatically search for Bluetooth keyboard devices.
-
Discover the Bluetooth keyboard device: Keyboard∗∗∗, and click on it, the Bluetooth keyboard will automatically connect.
-
After the Bluetooth connection is successful, the Bluetooth indicator lights up for 1 second and then off, and “Connected” will appear in the list of Bluetooth devices.
When the pairing is finished , the Bluetooth Indicator on the keyboard would be off. No more pairing required ·after your first successful connection.
How to get touchpad to work?
-
Make sure your iPad is of iOS 13 or above.
If not , you have to upgrade your iOS to 13 version or above by going to Settings ➔ General ➔ Software Update .which would take you several minutes for upgrading.
-
TURN ON the touch function in your iPad Settings ➔ Accessibility ➔ Touch ➔ Assistive Touch ➔ ON.
-
ln your daily use, you can press Fn+6 , to turn off the touch pad function. Or press Fn+6 , again to enable it to start your trackpad journey.
How to adjust the speed of touchpad?
If the touchpad moves too fast or too slow for you, you can adjust its speed in your iPad by going to Settings ➔ Accessibility ➔ Touch ➔ Assistive Touch ➔ Mouse Keys ➔ Maxi mum Speed ➔ Adjust the speed as you like.
Keyboard shortcut function description & Fn function key
To access the shortcut keys function, please combine them with Fn key
| Back to Home page| | Back to previous| | Search
---|---|---|---|---|---
| Cut| | Copy| | Paste
| Previous track| | Pause/Play| | Touchpad on/off
| Mute Key| | Volume-| | Next track
| Lock screen| | Input method switch| | Volume+
| Switch to device 2 1| | Switch to 2 2 device| | Switch to device 2 3
| Function key|
Andr
| Switch to Android|
Win
| Switch to windows system
IOS
| Switch to ios system| | | |
Note ❶ : All function keys must be combined with Fn , just press
and hold Fn+ function key.
Other shortcut key combinations: Ctrl+A (Select All);Ctrl+C (Copy);
Ctrl+A (Paste).
Note ❷ : 3devices and 3 systems switching method.
(no operation is required for the first boot after leaving the factory, it
will automatically enter device 1 pairing).
Device pairing: Press and hold Fn+ / / until , the Bluetooth indicator,
Caps Lock indicators, and weak current indicator will stay on for 1 second at
the same time. The Bluetooth indicator will start to flash, and off when it
connected successfully. And sleep when pairing timeout.
Device switch: Short press Fn+ / / , the Bluetooth indicator, Caps Lock
indicators, and weak current indicator will stay on for 1 second at the same
time, the keyboard Bluetooth will be connected automatically if you already
connected the device. The Bluetooth indicator will stay on for 1 second when
it connected successfully. And sleep when pairing timeout.
System switch: Short press Fn+ Q/W/E, and the Bluetooth indicator flashes
once, indicating that the switch to the corresponding system is successful.
Touchpad gestures
Attention
- When not in use for a long time, it is recommended to turn off the keyboard to extend battery life .
- ln order to get longer battery life ,charging it before keyboard power light flashes, charging time must be better more than 2 hours.
Energy saving sleep mode
When keyboard not use will be enter sleep mode after 10 minutes, keyboard indicator will be off, press any key 5s to wake it up.
Troubleshooting
- Make sure the keyboard is ON.
- Make sure the keyboard is in the operable distance.
- Make sure the battery has power.
- Make sure the Bluetooth ofyouriPad is ON.
- Make sure the keyboard is connected to your iPad via Bluetooth.
- Make sure the pairing is successful.
Cleaning
A bit water, alcohol or a similar cleaning agent clean keyboard.
Charging
When battery is in low power. the power indicator blinking. means need to charge the keyboard.
- Connect Genuine Parts USB Type-C cable B port to the keyboard charging port.
- Connect USB Type-C cable A port to power adapter or computer USB port.
- When charging. red light will be on, the light will be off or green light will be on after it’s fully charged.
How to get Auto-Wake/Sleep function worked?
Go to your iPad Settings ➔ Display & Brightness ➔ Lock/ Unlock
➔ ON Then when you fold the keyboard case , your iPad would go to sleep.
Unfold the case, you can get right away to do yo urwork in iPad.
How to switch between lower-case & upper-case?
Go to your iPad Settings ➔ General ➔ Keyboards ➔ Hardware
Keyboard ➔ Switch Languages using Caps Lock ➔ OFF. Then you can
switch between lower-case& upper- case by Caps lock key.
Dear Customer,
Thank you for shopping with us.
If you got the wrong size. anything question or any after-sale problem ,please
feel free to reach out to us via Amazon Message or email us to
BJCGFVH6@outlook.com.
Our customer support team on Amazon will help you out ASAP.
May all the joy in the world be concentrated on you and your families.
I hope the happiness surrounds you today and always.
Best regar1dls,
Dexinhe Customer Support learn
FAQ
Q : When I charge it for a long time, the keyboard doesnt turn on?****
A: Please turn off the power button and turn it on again.
Q: I can’t use shortcut keys?****
A: Please make sure you are using it in conjunction with Fn. For example, if you want to switch languages, press and hold Fn and together. If you want to lock the screen, you need to press and hold Fn+ together.
Q: The keyboard magnetic not strong enough to move frequently?****
A: This is a detachable keyboard. We want to make sure that you can break it out of the case. So we didn’t use the strongest magnet.
Q: Can’t charge the pencil in the slot?****
A: Please make sure that the Apple Pencil is placed in the pencil slot in the charging position: the pencil flat side is attached to the ipad, move it left and right through the hole outside the pencil slot to adjust it to the correct charging position and press the pencil.
Q:Can’t use function keys and touchpad shortcut. gestures when connected to devic1es other than ipad?****
A : Please make sure you switch to your corresponding system by pressing Fn+ Andr/Win/ios; please make sure you read the gestures of the corresponding system in the manual.
Q:Why can’t the keyboard be connected to the second device for use?****
A: Please make sure you press and hold Fn+ until the blue connection indicator lights up, and then turn on the Bluetooth of your second device to connect it.
Q:When I connect three devices of different systems, why can’t I use the function key and touchpad of the corresponding device to operate gestures?****
A: After connected them. please make sure you short press Fn+ / / to switch the corresponding device (you can confirm which device you have switched to by operating the touchpad), please ma!<e sure to short press Fn+ Andr/Win/ios to switch to your device corresponding System; please make sure you read the gestures of the corresponding system in the manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>